1 ,3- Dicarbonyl compounds Michael addition with

Aromatic aldehydes react very easily with tetramic acid under acidic conditions to give 3-benzylidene compounds (41). The yields are moderate, because often there are subsequent reactions. As a,/3-unsaturated carbonyl compounds, (41) react in a Michael addition with excess tetramic acid to form (67), but it can also react with other acyclic and cyclic 1,3-dicarbonyl compounds. In these reactions the aryl substituents may vary over a wide range. Thus, (67) and (68) can be cyclized with ammonium acetate to afford pharmacologically interesting compounds (70) and (71) (90TH1). The latter are dihydropyridines. Curiously, (69) does not cyclize under these conditions. (See Fig. 32.)... 

The Knoevenagel condensation is a base-catalyzed aldol-type reaction, and the exact mechanism depends on the substrates and the type of catalyst used. The first proposal for the mechanism was set forth by A.C.O. Hann and A. Lapworth Hann-Lapworth mechanism) In 1904." When tertiary amines are used as catalysts, the formation of a p-hydroxydlcarbonyl Intermediate is expected, which undergoes dehydration to afford the product. On the other hand, when secondary or primary amines are used as catalyst, the aldehyde and the amine condense to form an Imlnlum salt that then reacts with the enolate. Finally, a 1,2-ellmlnatlon gives rise to the desired a,p-unsaturated dicarbonyl or related compounds. The final product may undergo a Michael addition with the excess enolate to give a bis adduct. 

Dicarbonyl compound 52 being strongly acidic undergoes a Michael addition with methyl vinylketone (MVK) and the intermediate products can be cyclized to s/wVo-cyclohexenone 68 (Scheme 64, ref. 65). 

Formation of the 1,4-dihydropyridines 165 occurs by two routes. In the first, NH3 and the P-dicarbonyl compound combine to give a P-enaminone 168, whereas the aldehyde and dicarbonyl compound interact to produce an a,p-unsaturated ketone 167 as the result of a Knoevenagel condensation 167 and 168 now undergo a Michael addition to give 5-aminopent-4-enones 169, followed by cyclocondensation. Alternatively, the two molecules of the P-dicarbonyl compound may interact with the aldehyde by Knoevenagel condensation followed by Michael addition to the 1,5-dicarbonyl system 170, which undergoes cyclocondensation with NH3. 

Michael addition of 1,3-dicarbonyl compounds to nitroalkenes with subsequent cyclization and loss of HNO2 yields furans (Equation (33)). 4,5-Annulated furans are also available by this route <57CB1215, 59LA(626)71, 78JCS(P1)1144, 80JOC2945, 83IJC(B)914, 8381027). 

This reaction was first reported by Krohnke et al. in 1961. It is the synthesis of 2,4,6-trisubstituted pyridine derivatives involving the formation of pyridinium ylide from pyridine and a-bromoketone, which undergoes the 1,4-Michael addition to an a, -unsaturaled compound to form 1,5-dicarbonyl compounds and cyclizes with ammonium acetate. Therefore, it is generally known as the Krohnke pyridine synthesis or Krohnke reaction. In this reaction, the intermediate 1,5-dicarbonyl compounds do not need to be isolated from reaction mixture. Because three different substituents can be introduced into pyridine ring, this reaction becomes the ideal model for combinatorial synthesis, and a library pool containing pyridine from 9 to over 200 has been generated by this reaction. 

Michael addition with/5-dicarbonyl compounds to yield adducts which readily cyclize to polyhydroxyalkylated heterocyclic derivatives (difuranylhydroxylamines)H.m.r. data on peracetylated 1-deoxy-1-nitroheptitols have been used to deduce preponderant conformations... 

In Summary The Michael addition results in the conjugate addition of an enolate ion to give dicarbonyl compounds. The Robinson annulation reaction combines a Michael addition with a subsequent intramolecular aldol condensation to produce new cyclic enones. 

Indeed, when the pre-formed aminal 12 was treated with ethyl acetoacetate in ethanol, the bis-adduct 7 was isolated in good yield. Knoevenagel s proposal for the mechanism of this reaction therefore was first, condensation of the amine and aldehyde to give the aminal 12, followed by attack of this by the acetoacetate to produce a presumed 3-amino dicarbonyl intermediate 13, which would then eliminate piperidine to give the a,p-unsaturated dicarbonyl compound 14, which in this case underwent a final Michael addition with an additional equivalent of ethyl acetoacetate to provide the bis-adduct 7. 

Conventional synthetic schemes to produce 1,6-disubstituted products, e.g. reaction of a - with d -synthons, are largely unsuccessful. An exception is the following reaction, which provides a useful alternative when Michael type additions fail, e. g., at angular or other tertiary carbon atoms. In such cases the addition of allylsilanes catalyzed by titanium tetrachloride, the Sakurai reaction, is most appropriate (A. Hosomi, 1977). Isomerization of the double bond with bis(benzonitrile-N)dichloropalladium gives the y-double bond in excellent yield. Subsequent ozonolysis provides a pathway to 1,4-dicarbonyl compounds. Thus 1,6-, 1,5- and 1,4-difunctional compounds are accessible by this reaction. 

The best Michael reactions are those that take place when a particularly stable enolate ion such as that derived from a /i-keto ester or other 1,3-dicarbonyl compound adds to an unhindered a,/3-unsaturated ketone. Tor example, ethyl acetoacetate reacts with 3-buten-2-one in the presence of sodium ethoxide to yield the conjugate addition product. 

Version (b) has a four-channel flow guidance that encompasses two mixing tees in two simple mixing tees (Figure 4.5) [8]. An example of this function is the flow guidance for the Michael addition. In a first step, the base and 1,3-dicarbonyl compound streams merge. The enolate stream thus formed is then mixed with the Michael acceptor. Microporous silica frits are set into the channels to minimize... 

The reactions [OS 52], [OS 53], [OS 54] and [OS 55] were chosen as test reactions among a wide class of reagents employed for Michael additions. 1,3-Dicarbonyl compounds were chosen because of their relatively high acidity since they enable one to use weak bases instead of strong bases such as sodium efhoxide. The latter is labile to moisture and can react with the Michael acceptor [8]. Diisopropylethyl-amine was chosen as a weak base. 

On the other hand, the enantioselective 1,4-addition of carbanions such as enolates to linear enones is an interesting challenge, since relatively few efficient methods exist for these transformations. The Michael reaction of p-dicarbonyl compounds with a,p-unsaturated ketones can be catalysed by a number of transition-metal compounds. The asymmetric version of this reaction has been performed using chiral diol, diamine, and diphosphine ligands. In the past few years, bidentate and polydentate thioethers have begun to be considered as chiral ligands for this reaction. As an example, Christoffers et al. have developed the synthesis of several S/O-bidentate and S/O/S-tridentate thioether... 

The use of oxygen-containing dienophiles such as enol ethers, silyl enol ethers, or ketene acetals has received considerable attention. Yoshikoshi and coworkers have developed the simple addition of silyl enol ethers to nitroalkenes. Many Lewis acids are effective in promoting the reaction, and the products are converted into 1,4-dicarbonyl compounds after hydrolysis of the adducts (see Section 4.1.3 Michael addition).156 The trimethylsilyl enol ether of cyclohexanone reacts with nitrostyrenes in the presence of titanium dichloride diisopropoxide [Ti(Oi-Pr)2Cl2], as shown in Eq. 8.99.157 Endo approach (with respect to the carbocyclic ring) is favored in the presence of Ti(Oi-Pr)2Cl2. Titanium tetrachloride affords the nitronates nonselectively. 

Dicarbonyl compounds can be converted into furans by methods other than the classical Feist- Benary method, the essential feature of which is alkylation by a haloketone or similar species. A curious variation is provided by the use of trichloronitroethene, Cl2C=CCIN02, which condenses with two moles of a 1,3-dicarbonyl compound by Michael addition followed by elimination of two chloride ions the third chloride is lost at the aroma-tization step so that, for example, methyl 3-oxobenzenepropanoate is converted into the nitrofuran 38."... 

As depicted in the following scheme, in the presence of sodium iodate and pyridine, several 5,6-dihydroxylated benzofuran derivatives were synthesized via an oxidation-Michael addition of P-dicarbonyl compounds to catechols in a one-pot procedure <06TL2615 06JHC1673>. A novel additive Pummerer reaction of 2-benzo[fc]furan sulfilimines with carbon nucleophiles derived from P-dicarbonyl compounds was also employed to the synthesis of 2,3-disubstituted benzo[b]furans <06TL595>. 

The formation of an allenyl ketone as the sole product can be achieved by using an excess (2 equiv.) of propargyl bromide (entries 3—6, Table 5.9). Use of an increased amount (3 equiv.) of the acylzirconocene chloride in the reaction with propargyl bromide and/or tosylate yields a significant amount of a 1,4-dicarbonyl compound derived from Michael-type addition of the acylzirconocene chloride to the initially formed allenyl ketone (entry 2, Table 5.9). The Michael-type addition of acylzirconocene chlorides to allenyl ketones under Cu(I)-catalyzed conditions has been confirmed by an independent experiment (Scheme 5.31). 

Examples of the Michael-type addition of carbanions, derived from activated methylene compounds, with electron-deficient alkenes under phase-transfer catalytic conditions have been reported [e.g. 1-17] (Table 6.16). Although the basic conditions are normally provided by sodium hydroxide or potassium carbonate, fluoride and cyanide salts have also been used [e.g. 1, 12-14]. Soliddiquid two-phase systems, with or without added organic solvent [e.g. 15-18] and polymer-supported catalysts [11] have been employed, as well as normal liquiddiquid conditions. The micellar ammonium catalysts have also been used, e.g. for the condensation of p-dicarbonyl compounds with but-3-en-2-one [19], and they are reported to be superior to tetra-n-butylammonium bromide at low base concentrations. 

During the coverage period of this chapter, reviews have appeared on the following topics reactions of electrophiles with polyfluorinated alkenes, the mechanisms of intramolecular hydroacylation and hydrosilylation, Prins reaction (reviewed and redefined), synthesis of esters of /3-amino acids by Michael addition of amines and metal amides to esters of a,/3-unsaturated carboxylic acids," the 1,4-addition of benzotriazole-stabilized carbanions to Michael acceptors, control of asymmetry in Michael additions via the use of nucleophiles bearing chiral centres, a-unsaturated systems with the chirality at the y-position, and the presence of chiral ligands or other chiral mediators, syntheses of carbo- and hetero-cyclic compounds via Michael addition of enolates and activated phenols, respectively, to o ,jS-unsaturated nitriles, and transition metal catalysis of the Michael addition of 1,3-dicarbonyl compounds. ... 

Dicarbonyl compounds are widely used in organic synthesis as activated nucleophiles. Because of the relatively high acidity of the methylenic C—H of 1,3-dicarbonyl compounds, most reactions involving 1,3-dicarbonyl compounds are considered to be nucleophilic additions or substitutions of enolates. However, some experimental evidence showed that 1,3-dicarbonyl compounds could react via C—H activations. Although this concept is still controversial, it opens a novel idea to consider the reactions of activated C H bonds. The chiral bifunctional Ru catalysts were used in enantioselective C C bonds formation by Michael addition of 1,3-dicarbonyl compounds with high yields and enantiomeric excesses. ... 

The asymmetric allylic C-H activation of cyclic and acyclic silyl enol ethers furnishes 1,5-dicarbonyl compounds and represents a surrogate of the Michael reaction [136]. When sufficient size discrimination is possible the C-H insertion is highly diastereoselective, as in the case of acyclic silyl enol ether 193 (Eq. 22). Reaction of aryldia-zoacetate 192 with 193 catalyzed by Rh2(S-DOSP)4 gives the C-H insertion product 194 (>90% de) in 84% enantiomeric excess. A second example is the reaction of the silyl enol ether 195 with 192 to form 196, a product that could not be formed from the usual Michael addition because the necessary enone would be in its tautomeric naphthol form (Eq. 23). 

Our own group is also involved in the development of domino multicomponent reactions for the synthesis of heterocycles of both pharmacologic and synthetic interest [156]. In particular, we recently reported a totally regioselective and metal-free Michael addition-initiated three-component substrate directed route to polysubstituted pyridines from 1,3-dicarbonyls. Thus, the direct condensation of 1,3-diketones, (3-ketoesters, or p-ketoamides with a,p-unsaturated aldehydes or ketones with a synthetic equivalent of ammonia, under heterogeneous catalysis by 4 A molecular sieves, provided the desired heterocycles after in situ oxidation (Scheme 56) [157]. A mechanistic study demonstrated that the first step of the sequence was a molecular sieves-promoted Michael addition between the 1,3-dicarbonyl and the cx,p-unsaturated carbonyl compound. The corresponding 1,5-dicarbonyl adduct then reacts with the ammonia source leading to a DHP derivative, which is spontaneously converted to the aromatized product. 

Michael additions. Conjugate addition of / -dicarbonyl compounds to various Michael acceptors is catalyzed efficiently by Ni(acac),. Yields arc usually higher than those obtained with traditional bases. 

The competition between Michael addition of a,(3-unsaturated ketones and Diels-Alder reactions involving furan and 2-methylfuran is affected by the catalyst used. Methyl vinyl ketone gives the alkylation product with furan and 2-methylfuran in the presence of silica gel (88TL175). Bis(alkylated) products have also been obtained in reactions of 2-methylene-1,3-dicarbonyl compounds (90H(31)1699). An intramolecular proton catalyzed alkylation reaction of an a,(3-unsaturated ketone provided a straightforward synthesis of norpinguisone (90TL4343) and in the example shown in Equation (4) the cyclization reaction involved an a,(3-y,8-dienone (94TL4887). 

Allylic C-H insertions have been used in key steps of the enantioselective synthesis of the pharmaceuticals (+)-ceitedil (26) [21] and (+)-indatraline (27) [22] (Scheme 11). The allylic C-H insertion reaction is an exciting alternative to the Claisen rearrangement as a rapid method for the synthesis of y,c>-unsaturated ester [23 ]. Similarly, the allylic C-H insertion with vinyl silyl ethers generates protected 1,5-dicarbonyl compounds, a complimentary reaction to the Michael addition [24]. Both types of C-H insertion can be achieved with high diastereoselectiv-ity and enantioselectivity [23, 24]. 

The prerequisite 1,5-dicarbonyl compounds and their equivalents can be formed in situ by a Michael addition of activated methylene groups onto O Ji-unsaturated systems <1996CHEC-II>. In this manner, 5-alkylidene-2-thioxo-dihydropyrimidincM,6(l //,5//)-dione 84 reacts with ethyl 3-oxobutanoate under microwave irradiation to from the intermediate 1,5-dicarbonyl compound 85, which spontaneously cyclize to afford the corresponding 4//-pyrans in high yield (Scheme 28) <2003SC3747>. 

In a one-pot three-component reaction, aromatic aldehydes, malononitrile and 1,3-dicarbonyl compounds react to form 2-amino-5-carboxy-4-aryl-47/-pyran-3-carbonitriles 87. The reaction proceeds by an initial Knoevenagel condensation of malononitrile with the aromatic aldehyde to afford the 2-benzylidenemalononitrile intermediate 88. Michael addition of the activated methylene group forms the 1,5-dicarbonyl equivalent 89, which upon ring closure affords 477-pyrans (Scheme 29) <2004SL871, 1999H(51)1101 >. 

---