Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diazotate anions

Thus the 2,4-dinitrophenyldiazonium cation will couple with PhOMe and the 2,4,6-compound with even the hydrocarbon 2,4,6-trimethylbenzene (mesitylene). Diazonium cations exist in acid and slightly alkaline solution (in more strongly alkaline solution they are converted first into diazotic acids, PhN=N—OH, and then into diazotate anions, PhN=N—O ) and coupling reactions are therefore carried out under these conditions, the optimum pH depending on the species being attacked. With phenols this is at a slightly alkaline pH as it is PhO , and not PhOH, that undergoes attack by... [Pg.146]

Sulfuric acid is normally used instead of hydrochloric acid in the diazotization step so as to minimize the competition with water for capture of the cationic intermediate Hydrogen sulfate anion (HS04 ) is less nucleophilic than chloride... [Pg.947]

Another example of the analogy between pyrazole and chlorine is provided by the alkaline cleavage of l-(2,4-dinitrophenyl)pyrazoles. As occurs with l-chloro-2,4-dinitrobenzene, the phenyl substituent bond is broken with concomitant formation of 2,4-dinitrophenol and chlorine or pyrazole anions, respectively (66AHC(6)347). Heterocyclization of iV-arylpyrazoles involving a nitrene has already been discussed (Section 4.04.2.1.8(i)). Another example, related to the Pschorr reaction, is the photochemical cyclization of (515) to (516) (80CJC1880). An unusual transfer of chlorine to the side-chain of a pyrazole derivative was observed when the amine (517 X = H, Y = NH2) was diazotized in hydrochloric acid and subsequently treated with copper powder (72TL3637). The product (517 X = Cl, Y = H) was isolated. [Pg.268]

When 6-APA is diazotized in the absence of an anion more nucleophilic than water, or when a 6-diazopenicillanate is treated with aqueous nonnucleophilic acid, 6o -hydroxy-penicillanates are produced (67HCA1327, 74JOC1444). Esters of these compounds can be formed either by acylation, or by thermal rearrangement of the corresponding N-... [Pg.318]

Treatment of aniline 1 with nitric acid in the presence of tetrafluoroboric acid leads to a relatively stable benzenediazonium tetrafluoroborate 2 by the usual diazotization mechanism. There are several variants for the experimental procedure. Subsequent thermal decomposition generates an aryl cation species 4, which reacts with fluoroborate anion to yield fluorobenzene 3 " ... [Pg.250]

Monoaminoarenesulfonic acids exist in acid solution as zwitterions (2.3 in the case of sulfanilic acid), which are relatively insoluble in contrast to the corresponding bases (such as 2.4). For this reason the indirect method of diazotization is often employed in such cases. The aminoarenesulfonic acid is dissolved as the anion (2.4) by introducing the required amount of sodium carbonate or hydroxide, and nitrite is added to the approximately neutral solution, which is then run into mineral acid. Indirect diazotization is particularly recommended for the aminosulfonic acids of greater molecular mass but, contrary to some statements in the literature, the three anilinesulfonic acids themselves can be diazotized directly in suspension, the reaction proceeding quite smoothly after some practice. [Pg.15]

Anion-catalyzed phase transfer catalysis in a dichloromethane-aqueous sulfuric acid two-phase system was successfully applied to the diazotization of pen-tafluoroaniline by Iwamoto et al. (1983 a, 1984). If this compound is diazotized in dilute aqueous acid, tetrafluoro-l,4-quinone diazide is obtained, indicating that the diazotization proper is followed by a hydroxy-de-fluorination (Brooke et al., 1965). [Pg.21]

These salts can be made easily since tetrafluoroboric acid (HBF4) and hexa-fluorophosphoric acid (HPF6) are commercially available. However, the main advantage of the diazonium salts with the anions of these acids is their stability, which is significantly higher than that of probably all other diazonium salts. 4-Nitrobenzenediazonium tetrafluoroborate is nowadays even a commercial product. Preparative diazotization methods with these two acids can be found in Organic Syntheses (tetrafluoroborate Starkey, 1943 hexafluorophosphate Rutherford and Redmont, 1973). [Pg.25]

The major problem of these diazotizations is oxidation of the initial aminophenols by nitrous acid to the corresponding quinones. Easily oxidized amines, in particular aminonaphthols, are therefore commonly diazotized in a weakly acidic medium (pH 3, so-called neutral diazotization) or in the presence of zinc or copper salts. This process, which is due to Sandmeyer, is important in the manufacture of diazo components for metal complex dyes, in particular those derived from l-amino-2-naphthol-4-sulfonic acid. Kozlov and Volodarskii (1969) measured the rates of diazotization of l-amino-2-naphthol-4-sulfonic acid in the presence of one equivalent of 13 different sulfates, chlorides, and nitrates of di- and trivalent metal ions (Cu2+, Sn2+, Zn2+, Mg2+, Fe2 +, Fe3+, Al3+, etc.). The rates are first-order with respect to the added salts. The highest rate is that in the presence of Cu2+. The anions also have a catalytic effect (CuCl2 > Cu(N03)2 > CuS04). The mechanistic basis of this metal ion catalysis is not yet clear. [Pg.27]

The tetracyano derivative of 2.49, 5-diazo-l,2,3,4-tetracyanocyclopentadiene (2.52), and its heterocyclic analogue, 2-diazo-4,5-dicyano-imidazole (2.53) can be obtained by diazotization of the corresponding amines, namely the (anionic) 1-amino-... [Pg.34]

Acidity has an important influence on diazotization. Correlations of rates of diazotization with acidity and their implications regarding the reaction mechanism were first evaluated by Ridd (reviews Ridd, 1959, 1961, 1965, 1978 Williams, 1983, 1988). In this section we will concentrate mainly on aqueous solutions of sulfuric acid and perchloric acid, as the weakly nucleophilic anions of these acids do not interact with the nitrosating species. The mechanism of diazotization in the presence... [Pg.44]

More recently, Stepanov et al. (1989) investigated the acid-base properties of the zwitterion 3.22 which is obtained in the diazotization of 5-amino-3-nitro-l,2,4-triazole. Under alkaline conditions the (Z)-diazoate dianion 3.23 is formed. It can be isomerized thermally to give the (E)-diazoate dianion 3.24. If the solution of this compound is acidified, the primary addition of a proton takes place at the anionic ring nitrogen yielding 3.25, and subsequently the hydrogen-bond-stabilized (Z)-iso-mer (3.26). Further acidification gives the nitrosoamine (3.27). [Pg.61]

Experience in PTC with cationic catalysts showed that, in general, the most suitable compounds have symmetrical structures, are lipophilic, and have the active cationic charge centrally located or sterically shielded by substituents. For anionic catalysis sodium tetraphenylborate fulfills these conditions, but it is not stable under acidic conditions. However, certain derivatives of this compound, namely sodium tetra-kis[3,5-bis(trifluoromethyl)phenyl]borate (TFPB, 12.162) and sodium tetrakis[3,5-bis-(l,l,l,3,3,3-hexafluoro-2-methoxy-2-propyl)phenyl]borate (HFPB) are sufficiently stable to be used as PTC catalysts for azo coupling reactions (Iwamoto et al., 1983b 1984 Nishida et al., 1984). These fluorinated tetraphenylborates were found to catalyze strongly azo coupling reactions, some of which were carried out with the corresponding diazotization in situ. [Pg.378]

Ethyl 3-azido-l-methyl-177-indole-2-carboxylate 361 is prepared in 70% yield by diazotization of amine 360 followed by substitution of the created diazonium group with sodium azide. In cycloadditions with nitrile anions, azide 361 forms triazole intermediates 362. However, under the reaction conditions, cyclocondensation of the amino and ethoxycarbonyl groups in 362 results in formation of an additional ring. This domino process provides efficiently 4/7-indolo[2,3-i ]l,2,3-triazolo[l,5- ]pyrimidines 363 in 70-80% yield (Scheme 57) <2006TL2187>. [Pg.46]

Principally the same, but chemically simpler, sequence was used to prepare arylnitro anion-radicals from arylamines, in high yields. For instance, aqueous sodium nitrite solution was added to a mixture of ascorbic acid and sodium 3,5-dibromo-4-aminobenzenesulfonate in water. After addition of aqueous sodium hydroxide solution, the cation-radical of sodium 3,5-dibromo-4-nitro-benzenesulfonate was formed in the solution. The latter was completely characterized by its ESR spectrum. Double functions of the nitrite and ascorbic acid in the reaction should be underlined. Nitrite takes part in diazotization of the starting amine and trapping of the phenyl a-radical formed after one-electron reduction of the intermediary diazo compound. Ascorbic acid produces acidity to the reaction solution (needed for diazotization) and plays the role of a reductant when the medium becomes alkaline. The method described was proposed for ESR analytical determination of nitrite ions in water solutions (Lagercrantz 1998). [Pg.211]


See other pages where Diazotate anions is mentioned: [Pg.57]    [Pg.146]    [Pg.169]    [Pg.85]    [Pg.57]    [Pg.146]    [Pg.169]    [Pg.85]    [Pg.44]    [Pg.96]    [Pg.7]    [Pg.21]    [Pg.256]    [Pg.163]    [Pg.80]    [Pg.636]    [Pg.137]    [Pg.115]    [Pg.671]    [Pg.689]    [Pg.712]    [Pg.267]    [Pg.240]    [Pg.44]    [Pg.488]   
See also in sourсe #XX -- [ Pg.146 ]

See also in sourсe #XX -- [ Pg.146 ]

See also in sourсe #XX -- [ Pg.146 ]




SEARCH



Diazotate

Diazotates

Diazotization

© 2024 chempedia.info