Diamine preformed

Aromatic copoly(amide—imide)s with Atriazine rings in the repeating unit of the backbone are also possible from a diacyl chloride reacting with preformed imide groups and diamines containing Atriazine rings (15). 

Copolymers. There are two forms of copolymers, block and random. A nylon block copolymer can be made by combining two or more homopolymers in the melt, by reaction of a preformed polymer with diacid or diamine monomer by reaction of a complex molecule, eg, a bisoxazolone, with a diamine to produce a wide range of multiple amide sequences along the chain and by reaction of a diisocyanate and a dicarboxybc acid (193). In all routes, the composition of the melt is a function of temperature and more so of time. Two homopolyamides in a moisture-equiUbrated molten state undergo amide interchange where amine ends react with the amide groups. 

Rather than preforming the a-amino ketimines to be reduced, it is often advantageous to form in situ the more reactive iminium ions from a-aminoketones and primary amines or ammonium salts in the presence of the reducing agent, e.g., sodium cyanoborohydride. Use of this procedure (reductive amination) with the enantiopure a-aminoketone 214 and benzylamine allowed the preparation of the syn diamines 215 with high yields and (almost) complete diastereoselectivities [100] (Scheme 32). Then, the primary diamines 216 were obtained by routine N-debenzylation. Similarly, the diamine 217 was prepared using ammonium acetate. In... 

Block copolymers may also be made by condensation polymerization. Elastomer fibers are produced in a three-step operation. A primary block of a polyether or polyester of a molecular weight of 1000-3000 is prepared, capped with an aromatic diisocyanate, and then expanded with a diamine or dihydroxy compound to a multiblock copolymer of a molecular weight of 20,000. The oxidative coupling of 2,6-disubstituted phenols to PPO is also a condensation polymerization. G. D. Cooper and coworkers report the manufacture of a block copolymer of 2,6-dimethyl-phenol with 2,6-diphenylphenol. In the first step, a homopolymer of diphenylphenol is preformed by copper-amine catalyst oxidation. In the second step, oxidation of dimethylphenol in the presence of the first polymer yields the block copolymer. 

The excellent enantioselectivity and wide scope of the CBS reduction have motivated researchers to make new chiral auxiliaries [3]. Figure 1 depicts examples of in situ prepared and preformed catalyst systems reported since 1997. Most of these amino-alcohol-derived catalysts were used for the reduction of a-halogenated ketones and/or for the double reduction of diketones [16-28]. Sulfonamides [29,30], phosphinamides [31], phosphoramides [32], and amine oxides [33] derived from chiral amino alcohols were also applied. The reduction of aromatic ketones with a chiral 1,2-diamine [34] and an a-hydroxythiol [35] gave good optical yields. Acetophenone was reduced with borane-THF in the presence of a chiral phosphoramidite with an optical yield of 96% [36]. 

Several novel clathrochelate complexes have also been prepared via the oxidation of preformed sarcophaginates. The cyclohexane-diamine fragments of char sarcophaginate underwent oxidation with mercury(II) acetate in acetic acid to give the diamide complex (Reaction 28). In addition, one of the cyclohexane rings has also been aromatized ... 

The mechanism of the Petasis boronic acid-Mannich reaction is not fully understood. In the first step of the reaction, upon mixing the carbonyl and the amine components, three possible products can form iminium salt A, diamine B, and a-hydroxy amine C. It was shown that preformed iminium salts do not react with boronic acids. This observation suggests that the reaction does not go through intermediate A. Both intermediate B and C can promote the formation of the product. Most likely, the reaction proceeds through intermediate C, where the hydroxyl group attacks the electrophilic boron leading to an ate -complex. Subsequent vinyl transfer provides the allylic amine along with the boronic acid sideproduct. 

Polymerised preformed [(N,N -dimethyl-l,2-diphenylethane diamine)2Rh] complex allows us to obtain enantioselective material. We have then shown that it is possible to imprint an optically pure template into the rhodium-organic matrix and to use the heterogeneous catalyst in asymmetric catalysis with an obvious template effect. The study of yield versus conversion graphs has shown that the mechanism occurs via two parallel reactions on the same site without any inter-conversion of the final products. Adjusting the cross-linker ratio at 50/50 allows us to find a compromise between activity and selectivity. Phenyl ethyl ketone (propiophenone) was reduced quantitatively in 2 days to (R)-l-phenyl propanol with 7tf% enantiomeric excess We have then shown that the imprinting effect is obvious for molecules related in structure to the template (propiophenone, 4 -trifluoromethyl acetophenone). It is not efficient if the structure of the substrate is too different to that of the template. 

Our interest in the synthetic utility of N-chelated organolithium compounds was prompted by this early work. Since detailed experimental procedures were not generally available at that time, we initiated a study of the effects of time, temperature, stoichiometry, etc., on the reactions of BuLi-TMEDA with benzene. We found that optimum metalation of benzene occurs when the preformed BuLi-TEMEDA complex, prepared from equimolar amounts of the organolithium reagent and diamine, is... 

Scheme 8 Polymerization of a preformed diamine-rhodium complex without a template molecule.

With the polyimides produced in situ, the imide group is simultaneously formed with the polymer. Synthesis and processing difficulties with polyimides formed in situ have led to the development of monomers and prepolymers with preformed imide groups. For example, maleic anhydride converts to what is known as bismaleimides with suitable diamines... 

---