Diacryl

Glycol diacrylates Glycol dibenzoates Glycol ethers... 

The hydroxyl groups can be esterified normally the interesting diacrylate monomer (80) and the biologicaky active haloacetates (81) have been prepared in this manner. Reactions with dibasic acids have given polymers capable of being cross-linked (82) or suitable for use as soft segments in polyurethanes (83). Polycarbamic esters are obtained by treatment with a diisocyanate (84) or via the bischloroformate (85). 

Glycol diacrylates ethylene glycol (monoester) C5H8O3 [818-61-1] 40 0.001 1.4482 (25°C) ... 

Miscellaneous Curing Reactions. Other functional groups can react with the thiol terminal groups of the polysulfides to cross-link the polymer chains and build molecular weight. For example, aldehydes can form thioacetals and water. Organic and inorganic acids or esters can form thioesters. Active dienes such as diacrylates can add to the thiols (3). Examples of these have been mentioned in the Hterature, but none have achieved... 

The DADC monomer has been copolymerized with small amounts of polyfunctional methacryflc or acryflc monomers. For example, 3% triethylene glycol dimethacrylate was used as a flexibiflzing, cross-linking agent with a percarbonate as initiator (26). CR-39 and diethylene glycol diacrylate containing isopropyl percarbonate were irradiated with a mercury lamp to a 92% conversion and then cured at 150°C (27). By a similar two-step process DADC was copolymerized with methyl methacrylate and tetraethylene glycol dimethacrylate (28). 

Reactive (unsaturated) epoxy resins (qv) are reaction products of multiple glycidyl ethers of phenoHc base polymer substrates with methacrylic, acryhc, or fumaric acids. Reactive (unsaturated) polyester resins are reaction products of glycols and diacids (aromatic, aUphatic, unsaturated) esterified with acryhc or methacrylic acids (see POLYESTERS,unsaturated). Reactive polyether resins are typically poly(ethylene glycol (600) dimethacrylate) or poly(ethylene glycol (400) diacrylate) (see PoLYETPiERs). 

Laminating resins have been offered by Akzo (Diacryl 101), Dow (Derakane Vinyl Esters) and Showa (Spilac). Typical of these is Diacryl 101, which is manufactured by esterification of the addition product of ethylene oxide to bis-phenol A with methacrylic acid. They exhibit lower curing shrinkage than the polyester laminating resins during cure. The structure of Diacryl 101 is... 

Acryloyl chloride (0.2 mol) in dry benzene (60 ml) was added over 0.5 hour with mechanical stirring to pentane-1,5-diol (0.1 mol), triethylamine (0.2 mol) and pyrogallol (0.1 g) in dry benzene (100 ml). Further dry benzene (ca 100 ml) was added followed by triethylamine (10 ml), and the mixture stirred at 50°C for 0.5 hour. The triethylamine hydrochloride was fii-tered off and the solvent removed In vacuo to leave a yellow oil which was distilled in the presence of a trace of p-methoxyphenol, excluding light, to give 1,5-pen tarn ethylene diacrylate (12.9g 61% BP90°to95°C/0,01 mm Hg),... 

A solution of tetrahydropapaverine (4.43 g) and 1,5-pentamethylene diacrylate (1.30 g) in dry benzene (15 ml) was stirred under reflux for 4B hours excluding light. The solvent was removed in vacuo and the residual pale red oil dissolved in chloroform (10 ml). Addition of ether (ca 400 ml), followed by saturated ethereal oxalic acid solution (ca 500 ml) gave a floc-culent white precipitate, which was filtered off, washed with ether and dried. Crystallization (twice) from ethanol gave N,N -4,10<)ioxa-3,11 <)ioxotridecvlene-1,13-bis-tetrahydropapa-verlne dioxalate as a white powder (3.5 g 51% MP 117°to 121°C). 

NR, styrene-butadiene mbber (SBR), polybutadiene rubber, nitrile mbber, acrylic copolymer, ethylene-vinyl acetate (EVA) copolymer, and A-B-A type block copolymer with conjugated dienes have been used to prepare pressure-sensitive adhesives by EB radiation [116-126]. It is not necessary to heat up the sample to join the elastomeric joints. This has only been possible due to cross-linking procedure by EB irradiation [127]. Polyfunctional acrylates, tackifier resin, and other additives have also been used to improve adhesive properties. Sasaki et al. [128] have studied the EB radiation-curable pressure-sensitive adhesives from dimer acid-based polyester urethane diacrylate with various methacrylate monomers. Acrylamide has been polymerized in the intercalation space of montmorillonite using an EB. The polymerization condition has been studied using a statistical method. The product shows a good water adsorption and retention capacity [129]. 

The influence of polyfunctional monomers—tripropyleneglycol diacrylate (TPGDA), TMPTA, TMPTMA, TMMT, and TAG on the stmctural changes of fluorocarbon terpolymer poly(vinylide-nefluoride-co-hexafluoropropylene-co-tetrafluoroethylene) has been investigated [425]. The ATR-IR studies show that the absorbance due to the double bond at 1632 cm decreases both in the... 

---