Cyclohexanols esters

Figure 137. Representation of the direction of the maximum shielding in the esters of (a) 9-AHA and (b) 135.1. Models for the determination of the absolute configuration on a-chiral carboj lic acids by NMR of their tra/ s-2-phenyl-l-cyclohexanol esters (c, d and e).

Hydrocarbon Oxidation. The oxidation of hydrocarbons (qv) and hydrocarbon derivatives can be significantly altered by boron compounds. Several large-scale commercial processes, such as the oxidation of cyclohexane to a cyclohexanol—cyclohexanone mixture in nylon manufacture, are based on boron compounds (see Cylcohexanoland cyclohexanone Eibers, polyamide). A number of patents have been issued on the use of borate esters and boroxines in hydrocarbon oxidation reactions, but commercial processes apparently use boric acid as the preferred boron source. The Hterature in this field has been covered through 1967 (47). Since that time the Hterature consists of foreign patents, but no significant appHcations have been reported for borate esters. 

One principal use of cyclohexanol has been in the manufacture of esters for use as plasticizers (qv), ie, cyclohexyl and dicyclohexyl phthalates. In the finishes industry, cyclohexanol is used as a solvent for lacquers, shellacs, and varnishes. Its low volatiUty helps to improve secondary flow and to prevent blushing. It also improves the miscibility of cellulose nitrate and resin solutions and helps maintain homogeneity during drying of lacquers. Reaction of cyclohexanol with ammonia produces cyclohexylamine [108-91-8], a corrosion inhibitor. Cyclohexanol is used as a stabilizer and homogenizer for soaps and synthetic detergent emulsions. It is used also by the textile industry as a dye solvent and kier-boiling assistant (see Dye carriers). 

The next step was to convert cyclohexanone-4-carboxylic acid into l-methyl-cyclohexanol-4-carboxylic acid, and this is readily accomplished by heating the ester of the ketonic acid with magnesium methyliodide in the usual manner—... 

In this manner 45 grams of the carbamic acid ester of 1-ethinyl cyclohexanol are obtained. Yield 53% of the theoretical yield. The ester boils at 108° to 110°C/3 mm and on recrystallization from cyclohexane, yields colorless needles melting at 94° to 96°C. 

Likewise, thermolysis of 4-azidophenyl methyl ketone in methanol yields 5-acetyl-2-methoxy-3//-azepine (60%), compared to only an 8% yield from the photolytic reaction.78 119 The thermolysis of phenyl azide in refluxing cyclohexanol yields no 3H-azepine, only diphenyl-diazene (10%) and aniline (30%).74 In contrast, thermolysis of methyl 2-azidobenzoate in cyclohexanol furnishes a mixture of methyl 2-(cyclohexyloxy)-3//-azepine-3-carboxylate (20 % bp 127°C/0.1 Torr) and methyl 2-aminobenzoate (60%). Thermolysis of the azido ester in methanol under nitrogen in an autoclave at 150 C yields a 7 10 mixture (by 1HNMR spectroscopy) of the amino ester and methyl 2-methoxy-3//-azepine-3-carboxylate, which proved to be difficult to separate, and much tar.74 The acidic medium179 is probably responsible for the failure of methyl 2-azidoberjzoate to yield a 3//-azepine when thermolyzed in 3-methoxyphenol aniline (40%) is the major product.74... 

Benzenesulfomc aad, 4-methyl-, cyclohexyl ester [Cyclohexanol, p-toluenesul-fonate], 55, 112... 

Secondary alcohols such as cyclohexanol or 2-butanol also react on heating for 20-120 min at 80 °C with TCS 14 in the presence of BiCl3 to give the chloro compounds cyclohexyl chloride 784 and 2-chlorobutane in 93 and 90% yield, respectively, HCl, and HMDSO 7 [11, 12]. Benzyl alcohol is transformed likewise by Me3SiCl 14 after 120 min. at 80 °C into benzyl chloride in quantitative yield. Analogously, esters such as 2-acetoxypropane 785 are also converted by TCS 14 in 100% yield into chloro compounds such as 786 and trimethylsilyl acetate 142. The yS-lactone 787 gives rise to 788... 

Padhi, S.K., Kaluzna, I.A., Buisson, D. et al. (2007) Reductions of cyclic beta-keto esters by individual Saccharomyces cerevisiae dehydrogenases and a chemo-enzymatic route to (lR,2S)-2-methyl-l-cyclohexanol. Tetrahedron Asymmetry, 18 (18), 2133-2138. 

Esters of phosphorofluoridic acid. Two procedures for the preparation of the esters of phosphorofluoridic acid were developed, a general one applicable to most alcohols and a special one for cyclohexanol. 

In the absence of ultrasound, the results show a substantial amount (49 %) of the dimer bicyclohexyl from the one-electron pathway, together with cyclohexylmethyl-ether, cyclohexanol and other products from the two-electron pathway (approx. 30%). The methyl cyclohexanoate ester (17%) can be thought to arise from the acid catalysed chemical esterification of the starting material with the solvent methanol. (As a result of the high current densities needed, (parasitic) discharge of the solvent methanol produces a large quantity of protons around the anode as a competitive reaction [54].)... 

A further attempt has been made to develop a predictive model for chirality transfer achieved through alkylation reactions of ester enolates which feature chiral auxiliaries. " Hippurate esters (30) derived from (lI , 25 )-trani-2-(p-substituted phenyl)cyclohexanols were found, on reaction with benzyl bromide, to give (31) with predominantly the S configuration at the alkylation centre but with no correlation between the degree of stereoselectivity (20-98%) and the electron density on the aromatic ring. 

The solvents most commonly employed are water, ethyl and methyl alcohol, ether, benzene, petroleum ether, acetone, glacial acetic acid also two or three solvents may be mixed to get the desired effect as described later. If you still cannot dissolve the compound, try some of these chloroform, carbon disulfide, carbon tetrachloride, ethyl acetate, pyridine, hydrochloric acid, sulfuric acid (acids are usually diluted first), nitrobenzene, aniline, phenol, dioxan, ethylene dichloride, di, tri, tetrachloroethylene, tetrachloroethane, dichloroethyl ether, cyclohexane, cyclohexanol, tetralin, decalin, triacetin, ethylene glycol and its esters and ethers, butyl alcohol, diacetone alcohol, ethyl lactate, isopropyl ether, etc. 

Catalytic hydrogenation transforms keto esters to hydroxy esters under very gentle conditions. In cyclic ketones products of different configuration may result. Ethyl 3,3-dimethylcyclohexanone-2-carboxylatC on hydrogenation over platinum oxide in acetic acid gave 96.3% yield of cis, and over Raney nickel in methanol gave 97% yield of trans ethyl 3,3-dimethyl-cyclohexanol-2-carboxylate, both at room temperature and atmospheric pressure [847]. 

Lipase Catalyzed Kinetic Resolution of Alcohols via Chloroacetate Esters (-)-(lR,2S)-trans-2-Phenylcyclohexano1 and (+)-(lS,2R)-trans-2-Phenyl cyclohexanol... 

The data in Table 2 show the potential of the Na2B407 based catalyst system tested over large number of representative alcohols. The primary alcohols were oxidized to the corresponding aldehydes at complete conversion of the alcohol and at 90-93% selectivity. The only by-products observed were the corresponding acid and minor amounts of the symmetrical ester (Entry 2, 3). Benzyl alcohol was quantitatively converted to benzaldehyde. The secondary alcohols, 4-methyl cyclohexanol and 4-methylpentanol were converted to the corresponding ketones at room temperature. 

Oxidation catalyzed with boric acid (160-175°C, 8-10 atm) results in the formation of cyclohexyl esters.878,879 After hydrolysis a product mixture containing mainly cyclohexanol is formed.878 Since borate esters are less sensitive to further oxidation, better yields are usually achieved (85% at 12% conversion).872... 

---