Cyclic, trapping

Poly(dlmethyl siloxane) 92 Cyclics trapped to form catenanes with poly(2,6-dlmethyl-1,4-phenylene oxide). 26% w/w cyclics permanently captured In network. Ip, phase domains seen after extraction mechanical and thermal properties discussed. [104]... 

In addition to alcohols, some other nucleophiles such as amines and carbon nucleophiles can be used to trap the acylpalladium intermediates. The o-viny-lidene-/j-lactam 30 is prepared by the carbonylation of the 4-benzylamino-2-alkynyl methyl carbonate derivative 29[16]. The reaction proceeds using TMPP, a cyclic phosphite, as a ligand. When the amino group is protected as the p-toluenesulfonamide, the reaction proceeds in the presence of potassium carbonate, and the f>-alkynyl-/J-lactam 31 is obtained by the isomerization of the allenyl (vinylidene) group to the less strained alkyne. 

However, when the molecules are converted into their anions, the cyclic pyrazolo[l,5- fjtetrazole (471) form predominates. It is possible to trap the cyclized anions such as (471) by methylation and to obtain stable azapentalenes (472) and (473). 

Experiments with cyclic thioethers (80JCS(P1)1693), thiourea, thiocyanate and ethyl xan-thate always led to destruction of oxaziridines (73AJC2159). Products of complicated consecutive reactions could be isolated but only with some difficulty, e.g. (92) from a reaction with carbon disulfide (74JOC957), and (93), obtained by trapping with butadiene a product of a reaction between an oxaziridine and a thiirane (80JOC1691). 

This procedure is representative of a new general method for the preparation of noncyclic acyloins by thiazol ium-catalyzed dimerization of aldehydes in the presence of weak bases (Table I). The advantages of this method over the classical reductive coupling of esters or the modern variation in which the intermediate enediolate is trapped by silylation, are the simplicity of the procedure, the inexpensive materials used, and the purity of the products obtained. For volatile aldehydes such as acetaldehyde and propionaldehyde the reaction Is conducted without solvent in a small, heated autoclave. With the exception of furoin the preparation of benzoins from aromatic aldehydes is best carried out with a different thiazolium catalyst bearing an N-methyl or N-ethyl substituent, instead of the N-benzyl group. Benzoins have usually been prepared by cyanide-catalyzed condensation of aromatic and heterocyclic aldehydes.Unsymnetrical acyloins may be obtained by thiazol1um-catalyzed cross-condensation of two different aldehydes. -1 The thiazolium ion-catalyzed cyclization of 1,5-dialdehydes to cyclic acyloins has been reported. 

Irradiation of cyclic ketones having perfluoroalkyl groups causes cleavage of a ring to yield acyclic products [I74 (equation 44) Similarly, perfluonnated ketones undergo decarbonylation when irradiated [775]. Gas-phase photolysis of perfluorodiazoketones, in the presence of a trapping agent, yields fluorinated furan as a major product [176] (equation 45)... 

Unlike reactive diatomic chalcogen-nitrogen species NE (E = S, Se) (Section 5.2.1), the prototypical chalcogenonitrosyls HNE (E = S, Se) have not been characterized spectroscopically, although HNS has been trapped as a bridging ligand in the complex (HNS)Fc2(CO)6 (Section 7.4). Ab initio molecular orbital calculations at the self-consistent field level, with inclusion of electron correlation, reveal that HNS is ca. 23 kcal mof more stable than the isomer NSH. There is no low-lying barrier that would allow thermal isomerization of HNS to occur in preference to dissociation into H -1- NS. The most common form of HNS is the cyclic tetramer (HNS)4 (Section 6.2.1). 

Accordingly, cyclic nitronates can be a useful synthetic equivalent of functionalized nitrile oxides, while reaction examples are quite limited. Thus, 2-isoxazoline N-oxide and 5,6-dihydro-4H-l,2-oxazine N-oxide, as five- and six-membered cyclic nitronates, were generated in-situ by dehydroiodination of 3-iodo-l-nitropropane and 4-iodo-l-nitrobutane with triethylamine and trapped with monosubstituted alkenes to give 5-substituted 3-(2-hydroxyethyl)isoxazolines and 2-phenylperhydro-l,2-oxazino[2,3-fe]isoxazole, respectively (Scheme 7.26) [72b]. Upon treatment with a catalytic amount of trifluoroacetic acid, the perhydro-l,2-oxazino[2,3-fe]isoxazole was quantitatively converted into the corresponding 2-isoxazoline. Since a method for catalyzed enantioselective nitrone cycloadditions was established and cyclic nitronates should behave like cyclic nitrones in reactivity, there would be a good chance to attain catalyzed enantioselective formation of 2-isoxazolines via nitronate cycloadditions. 

Figure 2. Cyclic voltammograms of a poly(2,2 -bithiophene)-coated electrode in acetonitrile containing 0.1 M Bu4NC 04.34 (Reprinted from G. Zotti, C. Schiavon, and S. Zecchin, Irreversible processes in the electrochemical reduction of polythiophenes. Chemical modifications of the polymer and charge-trapping phenomena, Synth. Met. 72 (3) 275-281, 1995, with kind permission from Elsevier Sciences S.A.)...

Figure 21. Cyclic voltammograms (at 20to lOOmVs-1)of [FefCNJd3"74-electrostatically trapped in polypyrrole films with an alkyl pyridinium substituent at the (A) 1 - or (B) 3-position.243 (Reprinted with permission from J. Phys. Chem. 96, 5604-5610, 1992 Copyright 1992, American Chemical Society.)...

Selenoaldehydes 104, like thioaldehydes, have also been generated in situ from acetals and then directly trapped with dienes, thus offering a useful one-pot procedure for preparing cyclic seleno-compounds [103,104], The construction of a carbon-selenium double bond was achieved by reacting acetal derivatives with dimethylaluminum selenide (Equation 2.30). Cycloadditions of seleno aldehydes occur even at 0 °C. In these reactions, however, the carbon-selenium bond formed by the nucleophilic attack of the electronegative selenium atom in 105 to the aluminum-coordinated acetal carbon, may require a high reaction temperature [103], The cycloaddition with cyclopentadiene preferentially gave the kinetically favorable endo isomer. 

Cycloalkenones and/or their derivatives can also behave as dienic partners in the Diels-Alder cycloaddition. It is well documented [41] that cyclic acetals, for example, can interconvert with ring-opened enol ether forms, in a reversible manner the latter compounds can then be trapped by various dienophiles. Thus dienes 119 and 120 reacted with [60]-fullerene (Ceo) at high pressure, affording highly thermally stable products [42] (Scheme 5.16). Ketones 123 and 124 could be directly obtained by cycloaddition of enol forms 121 and 122 of 2-cyclopen-ten-and 2-cyclohexen-l-one, respectively. 

A derivative of cyclopentyne has been trapped in a matrix. Although cycloheptyne and cyclohexyne have not been isolated at room temperatures, Pt(0) complexes of these compounds have been prepared and are stable." The smallest cyclic allene" so far isolated is l-/err-butyl-l,2-cyclooctadiene 107." The parent 1,2-cyclooctadiene has not been isolated. It has been shown to exist transiently, but rapidly dimerizes." " The presence of the rert-butyl group apparently prevents this. The transient existence of 1,2-cycloheptadiene has also been shown," and both 1,2-cyclooctadiene and 1,2-cycloheptadiene have been isolated in platinum complexes." 1,2-Cyclohexadiene has been trapped at low temperatures, and its structure has been proved by spectral smdies." Cyclic allenes in general are less strained than their acetylenic isomers." The cyclic cumulene 1,2,3-cyclononatriene has also been synthesized and is reasonably stable in solution at room temperature in the absence of air." ... 

A number of metal complexes with disulfurmonoxide as a ligand have been prepared either by oxidation of precursor complexes containing the 2 hgand or by trapping S2O formally produced in situ from a suitable precursor by heating [52]. Such molecules are cyclic di-, tri-, or tetrasulfane monoxides or dioxides such as the one shown in Scheme 1. 

---