Cryocooler

HTS SQUID System with Joule-Thomson Cryocooler for Eddy Current Nondestructive... 

ELU0RINEC0MP0UNDS,0RGANIC - FLUORINATED ACETIC ACIDS] (Volll) Gifford-McMahon cryocooler... 

Other Refrigeration Methods. Cryocoolers provide low temperature refrigeration on a smaller scale by a variety of thermodynamic cycles. The Stirling cycle foUows a path of isothermal compression, heat transfer to a regenerator matrix at constant volume, isothermal expansion with heat transfer from the external load at the refrigerator temperature, and finally heat transfer to the fluid from the regenerator at constant volume. 

The Gifford-McMahon cryocooler consists of displacer, regenerator, compressor and intake/exhaust valves that can be staged to reach cryogenic temperatures. 

Nonyl aldehyde (32.66 g, 0.23 mol) and furan (200 mL, 187.2 g, 2.75 mol) were mixed in a 250-mL photolysis flask equipped with a quartz immersion well containing a Vycor filter and a 450-W Hanovia Lamp. The system was kept at -20° C with an isopropyl alcohol bath cooled by a Cryocool Immersion Cooler (CClOO). Nitrogen was bubbled throughout the duration of the reaction, and the solution was stirred vigorously. Additional furan (150 mL, 140.4 g, 2.06 mol) was added during the course of the reaction. TLC analysis indicated completion of the reaction after 20 h. After evaporation of excess furan and NMR analysis of the resultant oil (48.70 g, ca. 100%) indicated the desired photoadduct had been formed, without contamination from unreacted nonyl aldehyde. 

From Fig. 3.12, we see that at fixed (low) temperature, the specific heat of various solids range over many orders of magnitude. Low specific heat materials (high Debye temperature) are for example very important in the realization of detectors (see Chapter 15). High specific heat materials are essential as regenerators in cryocoolers (see Chapter 5 and Fig. 3.13). 

Fig. 3.13. Specific heat of some materials used in regenerators for cryocoolers [70].

Mechanical cryocoolers are used either to liquefy a gas for use away from the machine or to provide a cold platform for a refrigerator. A cryocooler must be as efficient as possible, whilst taking account of any constraints there may be for particular applications. For this to occur, the maximum possible use must be made of any cold substance that is produced. It is important in a helium liquefier that the fraction of gas which was cooled but did not liquefy is used to precool further incoming gas. This leads us directly to consider the heat exchangers. The combination of a cyclical process with the need for efficient heat exchange led to the idea of a regenerator in which heat may be stored for a short time, so that heat output from one phase of the cooling cycle may be reinserted at some phase. 

We will then describe the Collins helium liquefier and coolers which use turboexpanders (Linde He liquefier). At the end of the chapter, we will describe cooling cycles which use regenerators and other cycles used in cryocoolers (Philips-Stirling, Gifford-McMahon (GM), Klimenko cycles and pulse tube refrigerators (PTRs)). 

A special attention will be devoted to the latter type of refrigerators (Section 5.8) which seems nowadays one of the more promising cryocoolers. 

Fig. 5.13. Schematic diagram of a Klimenko cycle cryocooler. E123 denote heat exchangers V12 3 n are capillary expansion valves S12 3in are liquid-vapour separators [53].

This cycle also uses continuous counterflow heat exchanger and is closely related to the Joule-Thomson and Claude cycles as shown in Fig. 5.15(a) [60], The cryocooling or reverse Brayton cycle derives from a reciprocating gas engine patented by G. B. Brayton in... 

Developments in their use for laboratory scale cryocoolers can be found in reports from cryogenic engineering conferences and cryocooler conferences, e.g. [61-63], For recent examples of Brayton cooler realization, see [64,65],... 

A review and a performance comparison of liquid helium cryostats flown or planned for space flights is reported in ref. [40], A survey of low-power cryocooler suitable for space applications is done in ref. [41,42],... 

Fig. 2 (a) Edwards E308 evaporator. One quartz-crystal thickness monitor is pointed towards the Au source to monitor Au vapor deposition on chamber walls the other monitors Au deposited through the shadow mask atop the organic layer. In the cold Au deposition, a small amount of Ar gas is added to the chamber to cool the Au atoms to room temperature before they physisorb atop the cryocooled organic monolayer, (b) Geometry of an Au I monolayer I Au pad sandwich, with electrical connections made using a Ga/In eutectic... 

The cryocooling bath is modeled after commercial food-freezing tunnels. Key design parameters for each cryofracture train are given in Table 5-2. Projectiles... 

The tests on DPE suit material and wood addressed size-reduction and material-transport problems identified during the Demo I testing (NRC, 2000a). DPE suit and butyl rubber simulant materials were shredded in a dedicated granulator, cryogenically cooled in a cryo-cooler with an internal screw conveyor, and reduced in a cryocooled hammer mill. No materials contaminated with agent were tested. 

R.C. BowmanJr., B.D. Freeman, J.R. Phillips, Evaluation of metal hydride compressors for applications in Joule-Thomson cryocoolers, Cryogenics 32 (1992) 127-137. 

Nave, C. and Garman, E. F. (2005). Towards an understanding of radiation damage in cryocooled macromolecular crystals. /. Synchrotron Rad. 12,257-260. 

Owen, R. L., Rudino-Pmera, E. and Carman, E. F. (2006). Experimental determination of the radiation dose limit for cryocooled protein crystals. PNAS 103, 4912-4917. 

SneU, E. H., van der Woerd, M. J., Miller, M. D. and Deacon, A. M. (2005). Finding a cold needle in a warm haystack infrared imaging applied to locating cryocooled crystals in loops. /. Appl. Crystallogr. 38, 69-77. 

---