Furans 2.5- addition

Hence the positional selectivity is different from that of the furan additions to 417 (Scheme 6.90). Assuming diradical intermediates for these reactions [9], the different types of products are not caused by the nature of the allene double bonds of 417 and 450 but by the properties of the allyl radical subunits in the six-membered rings of the intermediates. Also N-tert-butoxycarbonylpyrrole intercepted 450 in a [4 + 2]-cycloaddition and brought about 455 in 29% yield. Pyrrole itself and N-methylpyr-role furnished their substituted derivatives of type 456 in 69 and 79% yield [155, 171b]. Possibly, these processes are electrophilic aromatic substitutions with 450 acting as electrophile, as has been suggested for the conversion of 417 into 442 by pyrrole (Scheme 6.90). 

Thieno[3,4-d][l,3]dithiol-2-one, 1-nitro-synthesis, 6, 1013 Thieno[3,4-c]furan, 4,6-dichloro-synthesis, 6, 1013 Thieno[3,4-c]furan, tetraphenyl-formation, 4, 1060 synthesis, 4, 1060 UV spectra, 4, 1044 Thieno[3,2-6]furans structure, 4, 1039 synthesis, 6, 1020 Thieno[3,4-c]furans addition reactions, 4, 1060 dipole moments, 4, 1040 synthesis, 4, 1073 Thieno[3,4- c]furazan synthesis, 6, 414... 

Dioxines and furanes Addition of sodium thiosulfate (if residual chlorine is present), cooling to 0-4°C, storage in the dark There is no demonstrated maximum holding time, up to 1 year 121... 

The synthetic scheme of Suzuki et al. [59] was based on the fact that adducts resulting from furan addition often rearrange to phenols (compare with [61]). In our group, we also investigated the reactions of naphthoquinones with siloxy-furans such as 64. However, instead of the expected [4 + 2] cycloaddition, a Michael addition that proceeded without catalyst occurred in the reaction with 3-chlorojuglone (63) [39]. Interestingly, both the Michael acceptor 63 and the donor 64 reacted in a 1,4-reaction mode. The regio- and stereochemistry of the product 65 were confirmed by x-ray analysis (Scheme 18). 

More intriguing is that the product of furan addition to [Ir(COD)(PMe3)3]Cl (106), undergoes an insertion reaction with r-butylacetylene, not into the Ir-H bond but into the Ir-C... 

Higher-order pyrrole cycloadducts could be accessed in a similar manner to furan cycloadducts, by employment of excess of pyrrole, as shown by Warrener (Scheme 24) [38]. However, in contrast to the furan additions, the 2 1... 

The Pd—C cr-bond can be prepared from simple, unoxidized alkenes and aromatic compounds by the reaction of Pd(II) compounds. The following are typical examples. The first step of the reaction of a simple alkene with Pd(ll) and a nucleophile X or Y to form 19 is called palladation. Depending on the nucleophile, it is called oxypalladation, aminopalladation, carbopalladation, etc. The subsequent elimination of b-hydrogen produces the nucleophilic substitution product 20. The displacement of Pd with another nucleophile (X) affords the nucleophilic addition product 21 (see Chapter 3, Section 2). As an example, the oxypalladation of 4-pentenol with PdXi to afford furan 22 or 23 is shown. 

In addition to benzene and naphthalene derivatives, heteroaromatic compounds such as ferrocene[232, furan, thiophene, selenophene[233,234], and cyclobutadiene iron carbonyl complexpSS] react with alkenes to give vinyl heterocydes. The ease of the reaction of styrene with sub.stituted benzenes to give stilbene derivatives 260 increases in the order benzene < naphthalene < ferrocene < furan. The effect of substituents in this reaction is similar to that in the electrophilic aromatic substitution reactions[236]. 

Benzoic acid and naphthoic acid are formed by the oxidative carbonylation by use of Pd(OAc)2 in AcOH. t-Bu02H and allyl chloride are used as reoxidants. Addition of phenanthroline gives a favorable effect[360], Furan and thiophene are also carbonylated selectively at the 2-position[361,362]. fndole-3-carboxylic acid is prepared by the carboxylation of 1-acetylindole using Pd(OAc)2 and peroxodisulfate (Na2S208)[362aj. Benzoic acid derivatives are obtained by the reaction of benzene derivatives with sodium palladium mal-onate in refluxing AcOH[363]. 

Hydroxy-THISs react with electron-deficient alkynes to give nonisol-able adducts that extrude carbonyl sulfide, affording pyrroles (23). Compound 16 (X = 0) seems particularly reactive (Scheme 16) (25). The cycloaddition to benzyne yields isoindoles in low- yield. Further cyclo-addition between isoindole and benzyne leads to an iminoanthracene as the main product (Scheme 17). The cycloadducts derived from electron-deficient alkenes are stable (23, 25) unless highly strained. Thus the two adducts, 18a (R = H, R = COOMe) and 18b (R = COOMe, R = H), formed from 7, both extrude furan and COS under the reaction conditions producing the pyrroles (19. R = H or COOMe) (Scheme 18). Similarly, the cycloadduct formed between 16 (X = 0) and dimethylfumarate... 

Metal-Induced Cycloadditions. The effect of coordination on the metal-iaduced cyclo additions of maleic anhydride and the isostmctural heterocycles furan, pyrrole, and thiophene has been investigated (47). Each heterocycle is bound to an Os(II) center in the complex... 

Nitrovin. 2- 3-(5-Nitro-2-furanyl)-l-[2-(5-nitro-2-furanyl)ethenyl]-2-propenyhdene hydrazinecarboximidamide hydrochloride has been marketed for both human and veterinary use as an antibacterial agent. The product, which has also seen use as a veterinary food additive (32), is prepared from 5-nitro-2-furan-carboxaldehyde and acetone followed by treatment of the resulting dione with aininoguariidine (33). 

NitrofuraZone. 2-[5-Nitro-2-furanyl)methylene]hydrazinecarboximide, the first nitrofiiran to be employed clinically, is prepared from 5-nitro-2-furancarboxaldehyde and semicarbazide (19). This product has seen clinical use topically as an antibacterial, for systemic appHcation for bacterial infections in poultry and swine, and also has been employed as a food additive. In rats, nitrofurazone is hydroxylated at the 4 position of the furan moiety (27). The involvement of nitrenium ions has also been postulated in the mechanism of action of nitrofurazone (38). 

In rats, the oxidative and reductive metaboHsm products have been identified as the 4-hydroxylated furan and [(3-cyano-l-oxopropyl)methyleneamino]-2-4-imidazohdinedione, respectively (27,42). In addition, the ease of electron transfer as a mechanism of activity with nitrofurantoin and nitrofurazone has been studied (43). 

The light-induced rearrangement of 2-phenyl- to 3-phenyl-thiophene may occur by a similar mechanism an equilibrium between the bicyclic intermediate (26) and the cyclopro-penylthioaldehyde (27) has been suggested (Scheme 2). The formation of IV-substituted pyrroles on irradiation of either furans or thiophenes in the presence of a primary amine supports this suggestion (Scheme 3). Irradiation of 2-phenylselenophene yields, in addition to 3-phenylselenophene, the enyne PhC=C—CH=CH2 and selenium. Photolysis of 2-phenyltellurophene furnishes solely the enyne and tellurium (76JOM(108)183). 

The high reactivity of pyrroles to electrophiles is similar to that of arylamines and is a reflection of the mesomeric release of electrons from nitrogen to ring carbons. Reactions with electrophilic reagents may result in addition rather than substitution. Thus furan reacts with acetyl nitrate to give a 2,5-adduct (33) and in a similar fashion an adduct (34) is obtained from the reaction of ethyl vinyl ether with hydrogen bromide. 

Halogens react with benzo[6]furan by an addition-elimination mechanism to give 2- and 3-substituted products (76JCS(P2)266). Treatment of benzo[6]thiophene with chlorine or bromine in acetic acid gives predominantly 3-substituted products (71JCS(B)79). 2,2,3,3,4,5,6,7-Octachloro-2,3-dihydrobenzothiophene is obtained when benzo[6]thio-phene is treated with chlorine in the presence of 1 mole of iodine (80JOC2l5l). 

Pyrrole, furan or thiophene do not react with nucleophilic reagents by substitution or addition but only by proton transfer. However, it should be noted that protonated pyrroles are susceptible to nucleophilic attack (see Section 3.02.2.4.5). 

Furan and thiophene undergo addition reactions with carbenes. Thus cyclopropane derivatives are obtained from these heterocycles on copper(I) bromide-catalyzed reaction with diazomethane and light-promoted reaction with diazoacetic acid ester (Scheme 41). The copper-catalyzed reaction of pyrrole with diazoacetic acid ester, however, gives a 2-substituted product (Scheme 42). 

Furan undergoes 1,4-addition with ethoxycarbonyinitrene to give, after rearrangement, the pyrrolinone (121). The corresponding reaction with pyrrole gives a mixture of (122) and (123) (64TL2185). 

A-Substituted pyrroles, furans and dialkylthiophenes undergo photosensitized [2 + 2] cycloaddition reactions with carbonyl compounds to give oxetanes. This is illustrated by the addition of furan and benzophenone to give the oxetane (138). The photochemical reaction of pyrroles with aliphatic aldehydes and ketones results in the regiospecific formation of 3-(l-hydroxyalkyl)pyrroles (e.g. 139). The intermediate oxetane undergoes rearrangement under the reaction conditions (79JOC2949). 

---