Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Crosslink modification

The conjugation process must leave the antigen binding sites on the antibody component free to interact with its intended target. Crosslinker modification or blockage of these binding sites by the attached toxin must be kept to a minimum. [Pg.832]

There are materials with low or no permeability to different environments or products. Different factors influence performance such as being pinhole-free chemical composition, crosslinking, modification, molecular orientation density, and thickness. The coinjection and... [Pg.30]

Molecular weight and crosslink modifications due to interference with curing processes. [Pg.36]

Chemical modification has a durable effect, but it is expensive and difficult to operate, so it is generally finished in a resin synthetic factory and rarely used in a polymer material processing factory, Only a crosslinked modification of polymer material can be conducted while processing. [Pg.22]

Overall modification is the modification that occurs in both the interior and the surface of the polymer material. A feature of this kind of modification is that performance changes uniformly. Modification of polymer materials is mostly overall modification, such as filling modification, blending modification, crosslinking modification, morphology control modification, and so forth that were mentioned previously. [Pg.22]

There are materials with low or no permeability to different environments or products. Barrier plastics are used with their technology not becoming more complex but more precise. Different factors influence performance such as being pinhole-fi ee chemical composition, crosslinking, modification, molecular orientation density, and thickness. The coextrusion and coinjection processes are used to reduce permeability while retaining other desirable properties. Total protection against vapor transmission by a single barrier material increases linearly... [Pg.391]

Usually spray-dried powders are sold. A purification step is not usually done on the industrial scale. The modification of the extracts are especially aimed at decreasing the sometimes too high viscosity to achieve better handling and application, but also a longer pot life and a better crosslinking [16,17,144]. [Pg.1070]

The treatment of blends as a two phase system opened up an interesting field of modifying the composite properties by the use of a (third component within the interface boundaries, which is termed as compatibilizers [1]. Such modifications are still being extended to the formation of microgel out of the interaction between the two blend partners having a reactive for functionalities. This type of interchain crosslinking does not require any compatibilizer to enhance the blend properties and also allows the blends to be reprocessed by further addition of a curative to achieve still further improved properties [3,4]. Such interchain crosslinking is believed to reduce the viscoelastic mismatch between the blend partners and, thus, facilitates smooth extrusion [5,6]. [Pg.611]

To determine the crosslinking density from the equilibrium elastic modulus, Eq. (3.5) or some of its modifications are used. For example, this analysis has been performed for the PA Am-based hydrogels, both neutral [18] and polyelectrolyte [19,22,42,120,121]. For gels obtained by free-radical copolymerization, the network densities determined experimentally have been correlated with values calculated from the initial concentration of crosslinker. Figure 1 shows that the experimental molecular weight between crosslinks considerably exceeds the expected value in a wide range of monomer and crosslinker concentrations. These results as well as other data [19, 22, 42] point to various imperfections of the PAAm network structure. [Pg.119]

Various modifications of the Flory theory [4] are usually applied to describe the uncharged gels. Their crosslinking density can be simply calculated from the swelling degree using Eqs. (3.1) and (3.2) or analytical expressions for the Mc value (see, for example, Ref. [124]). [Pg.119]

Another class of silicon-containing polymers that have great potential to be extremely useful precursor materials are poly(chlorocarbosilanes).14f 46 Poly (chlorocarbosilanes) are not useful without modification because of the rapid hydrolysis of Si—Cl bonds, forming HC1 and an insoluble crosslinked polymer network. However, nucleophilic substitution of these Si—Cl bonds with various reagents produces materials widi a broad range of properties that are determined by the nature of the nucleophile used.47 Poly(chlorocarbosilanes) can be easily synthesized by ADMET (Fig. 8.18) without any detrimental side reactions, since the Si—Cl bond is inert to both catalysts 12 and 14. Early studies produced a polymer with Mn = 3000.14f... [Pg.454]

Cross-linking agents have been proposed for the improvement of chitin fibres in the wet state. Epichlorohydrin is a convenient base-catalysed crosslinker to be used in 0.067 M NaOH (pH 10) at 40 °C. The wet strength of the fibres was considerably improved, whereas cross-hnking had neghgible effect on the dry fibre properties. Of course, the more extended the chemical modification, the more unpredictable the biochemical characteristics and effects in vivo. Every modified chitin or modified chitosan fibre should be studied in terms of biocompatibiUty, biodegradabiUty and overall effects on the wounded tissues. [Pg.186]

Generalization of Flory s Theory for Vinyl/Divinyl Copolvmerization Using the Crosslinkinq Density Distribution. Flory s theory of network formation (1,11) consists of the consideration of the most probable combination of the chains, namely, it assumes an equilibrium system. For kinetically controlled systems such as free radical polymerization, modifications to Flory s theory are necessary in order for it to apply to a real system. Using the crosslinking density distribution as a function of the birth conversion of the primary molecule, it is possible to generalize Flory s theory for free radical polymerization. [Pg.249]

The effect of various chemical modifications on the mechanical properties of reconstituted collagen and the diffusion rates of the steroid medroxyprogesterone was investigated (38). Formaldehyde-treated films, which are heavily crosslinked, have high moduli and low rates of drug release. Films treated with chrome quickly become hydrated in solution and have low moduli and very rapid drug release characteristics. [Pg.234]

Modification of the ATPase by ATP-EDC occurred without significant incorporation of the nucleotide into the enzyme, suggesting that the inhibition of enzymatic activity is entirely due to intramolecular crosslinking by the carbodiimide moiety... [Pg.97]

The most investigated examples are to be formd in the precipitation of polyelectrolytes by metal ions. Here, networks are formed by the random crosslinking of linear polymer chains, and the theory requires some modification. The condition for the formation of an infinite network is that, on average, there must be more than two crosslinks per chain. Thus, the greater the length of a polymer chain the fewer crossUnks in the system as a whole are required. [Pg.11]


See other pages where Crosslink modification is mentioned: [Pg.100]    [Pg.82]    [Pg.94]    [Pg.323]    [Pg.318]    [Pg.19]    [Pg.23]    [Pg.100]    [Pg.82]    [Pg.94]    [Pg.323]    [Pg.318]    [Pg.19]    [Pg.23]    [Pg.152]    [Pg.296]    [Pg.566]    [Pg.411]    [Pg.416]    [Pg.417]    [Pg.420]    [Pg.468]    [Pg.522]    [Pg.96]    [Pg.161]    [Pg.162]    [Pg.990]    [Pg.395]    [Pg.98]    [Pg.32]    [Pg.227]    [Pg.7]    [Pg.7]    [Pg.16]    [Pg.57]    [Pg.59]    [Pg.106]    [Pg.201]    [Pg.56]    [Pg.155]    [Pg.244]   
See also in sourсe #XX -- [ Pg.366 , Pg.367 , Pg.400 , Pg.410 , Pg.423 ]




SEARCH



Membrane modifications crosslinking

Modification and Crosslinking

Polymer modification crosslinking

Pre-modification of Hyper-crosslinked Polymers

© 2024 chempedia.info