Cross-linking conducting polymer solution

The conductivity changes accompanying and following the polymerisation of five portions of norbornadiene added to an aluminium bromide solution at -63 °C are shown in Figure 6 (Experiment No. R4). The polymer, which was precipitated during the reaction, was subsequently found to be insoluble and therefore presumably crosslinked. Since this polymer was, therefore, unsuitable for radiochemical assay, another experiment (RIO) was done with norbornadiene in a mixture of methyl and ethyl bromide at -125 °C to prevent cross-linking. The polymer was soluble and the number of tritium atoms per molecule of polymer was much greater than for polyisobutylene. 

Later we will describe both oxidation and reduction processes that are in agreement with the electrochemically stimulated conformational relaxation (ESCR) model presented at the end of the chapter. In a neutral state, most of the conducting polymers are an amorphous cross-linked network (Fig. 3). The linear chains between cross-linking points have strong van der Waals intrachain and interchain interactions, giving a compact solid [Fig. 14(a)]. By oxidation of the neutral chains, electrons are extracted from the chains. At the polymer/solution interface, positive radical cations (polarons) accumulate along the polymeric chains. The same density of counter-ions accumulates on the solution side. 

Our laboratory has planned the theoretical approach to those systems and their technological applications from the point of view that as electrochemical systems they have to follow electrochemical theories, but as polymeric materials they have to respond to the models of polymer science. The solution has been to integrate electrochemistry and polymer science.178 This task required the inclusion of the electrode structure inside electrochemical models. Apparently the task would be easier if regular and crystallographic structures were involved, but most of the electrogenerated conducting polymers have an amorphous and cross-linked structure. 

Hollow and porous polymer capsules of micrometer size have been fabricated by using emulsion polymerization or through interfacial polymerization strategies [79,83-84, 88-90], Micron-size, hollow cross-linked polymer capsules were prepared by suspension polymerization of emulsion droplets with polystyrene dissolved in an aqueous solution of poly(vinyl alcohol) [88], while latex capsules with a multihollow structure were processed by seeded emulsion polymerization [89], Ceramic hollow capsules have also been prepared by emulsion/phase-separation procedures [14,91-96] For example, hollow silica capsules with diameters of 1-100 micrometers were obtained by interfacial reactions conducted in oil/water emulsions [91],... 

Properties of peroxide cross-linked polyethylene foams manufactured by a nitrogen solution process, were examined for thermal conductivity, cellular structure and matrix polymer morphology. Theoretical models were used to determine the relative contributions of each heat transfer mechanism to the total thermal conductivity. Thermal radiation was found to contribute some 22-34% of the total and this was related to the foam s mean cell structure and the presence of any carbon black filler. There was no clear trend of thermal conductivity with density, but mainly by cell size. 27 refs. 

The reason for having a solution of polymers in the doped state was to elucidate that molecular conformation in the active doped state, compared with the neutral one. Attempts to reach the goal were unsuccessful for a long time, probably because the presence of the species responsible for the conductivity, free radicals, radical ions, counter ions, participated in undesired side reactions, i.c. cross-linking which decreases the processability of the polymer. 

---