Copper oxide formation

The different degrees of passivation may be related to the solubility of Cu(inhibitor) complexes. Cu is known to readily form complexes with BTA, PVI-1, and UDI [3, 30]. The charge balance for PVI-1 indicates that the passivating layer, at least for PVI-1, is partially soluble. It is known that Cu-PVI-1 and Cu-UDI complexes are soluble in 0.3M HCl [23,20]. This may explain why no such passivation is observed at pH=1, although the absence of copper oxide formation processes is also relevant. 

When the temperature was raised to 210 C, undecyllmldazole was completely degradated after 15 min (Figure 8.. No imidazole ring structure was observed. The nitrile peak at 2190 cm was pronounced, and the copper oxide formation was Intense. On the other hand, PVI(1) and PVI(4) degradation was relatively mild at after 15 min (Figures 9 and 10.). It was not until the... 

This copper catalyst system along with the aqueous phase were recyclable up to four times without loss of catalytic activity, and FT-IR spectrum on the used catalyst did not indicate any copper oxide formation. 

It has been stated that many halogen-free compounds, e.g., certain derivatives of pyridine and quinoline, purines, acid amides and cyano compounds, when ignited on copper oxide impart a green colour to the dame, presumably owing to the formation of volatile cuprous cyanide. The test is therefore not always trustworthy. The test is not given by duorides. 

In acidic solution, the degradation results in the formation of furfural, furfuryl alcohol, 2-furoic acid, 3-hydroxyfurfural, furoin, 2-methyl-3,8-dihydroxychroman, ethylglyoxal, and several condensation products (36). Many metals, especially copper, cataly2e the oxidation of L-ascorbic acid. Oxalic acid and copper form a chelate complex which prevents the ascorbic acid-copper-complex formation and therefore oxalic acid inhibits effectively the oxidation of L-ascorbic acid. L-Ascorbic acid can also be stabilized with metaphosphoric acid, amino acids, 8-hydroxyquinoline, glycols, sugars, and trichloracetic acid (38). Another catalytic reaction which accounts for loss of L-ascorbic acid occurs with enzymes, eg, L-ascorbic acid oxidase, a copper protein-containing enzyme. 

Today, the air oxidation of toluene is the source of most of the world s synthetic benzaldehyde. Both vapor- and Hquid-phase air oxidation processes have been used. In the vapor-phase process, a mixture of air and toluene vapor is passed over a catalyst consisting of the oxides of uranium, molybdenum, or related metals. High temperatures and short contact times are essential to maximize yields. Small amounts of copper oxide maybe added to the catalyst mixture to reduce formation of by-product maleic anhydride. 

Tertiary bismuthines appear to have a number of uses in synthetic organic chemistry (32), eg, they promote the formation of 1,1,2-trisubstituted cyclopropanes by the iateraction of electron-deficient olefins and dialkyl dibromomalonates (100). They have also been employed for the preparation of thin films (qv) of superconducting bismuth strontium calcium copper oxide (101), as cocatalysts for the polymerization of alkynes (102), as inhibitors of the flammabihty of epoxy resins (103), and for a number of other industrial purposes. 

There is little data available to quantify these factors. The loss of catalyst surface area with high temperatures is well-known (136). One hundred hours of dry heat at 900°C are usually sufficient to reduce alumina surface area from 120 to 40 m2/g. Platinum crystallites can grow from 30 A to 600 A in diameter, and metal surface area declines from 20 m2/g to 1 m2/g. Crystal growth and microstructure changes are thermodynamically favored (137). Alumina can react with copper oxide and nickel oxide to form aluminates, with great loss of surface area and catalytic activity. The loss of metals by carbonyl formation and the loss of ruthenium by oxide formation have been mentioned before. 

Copper and brasses in the systems are more resistant to corrosion because of a stable oxide film however, if ammonia is present together with oxygen, corrosion of copper and copper oxide rapidly occurs. The corrosion is an oxidation process and results in the formation of the ammonia-copper complex [Cu(NH3)42+], Corrosion of nickel and zinc components also may occur in like fashion. 

NOTE Cupric copper (Cu2+) is a catalyst for the hydrazine-oxygen reaction, as well as a catalyst for sulfite, DEHA, erythorbic acid, and hydroquinone. Cuprous copper (Cu+) acts as a complexing agent in the desirable formation of protective, pasivated copper oxide films. 

In addition to a-additions to isocyanides, copper oxide-cyclohexyl isocyanide mixtures are catalysts for other reactions including olefin dimerization and oligomerization 121, 125, 126). They also catalyze pyrroline and oxazoline formation from isocyanides with a protonic a-hydrogen (e.g., PhCH2NC or EtOCOCHjNC) and olefins or ketones 130), and the formation of cyclopropanes from olefins and substituted chloromethanes 131). The same catalyst systems also catalyze Michael addition reactions 119a). 

The reaction of olefin epoxidation by peracids was discovered by Prilezhaev [235]. The first observation concerning catalytic olefin epoxidation was made in 1950 by Hawkins [236]. He discovered oxide formation from cyclohexene and 1-octane during the decomposition of cumyl hydroperoxide in the medium of these hydrocarbons in the presence of vanadium pentaoxide. From 1963 to 1965, the Halcon Co. developed and patented the process of preparation of propylene oxide and styrene from propylene and ethylbenzene in which the key stage is the catalytic epoxidation of propylene by ethylbenzene hydroperoxide [237,238]. In 1965, Indictor and Brill [239] published studies on the epoxidation of several olefins by 1,1-dimethylethyl hydroperoxide catalyzed by acetylacetonates of several metals. They observed the high yield of oxide (close to 100% with respect to hydroperoxide) for catalysis by molybdenum, vanadium, and chromium acetylacetonates. The low yield of oxide (15-28%) was observed in the case of catalysis by manganese, cobalt, iron, and copper acetylacetonates. The further studies showed that molybdenum, vanadium, and... 

Cu(NH3)2BTC2/3 and finally copper hydroxide in the presence of water. The formation of the BTC salts was supported by the collapse of the structure after interaction of ammonia with unsaturated copper centers. The release of BTC and copper oxide centers provides sites for reactive adsorption of ammonia during the course of the breakthrough experiments. Interestingly, even though the structure collapses, some evidence of the structural breathing of the resulting materials caused by reactions with ammonia was found, based on the ammonia adsorption at equilibrium and the analysis of the heat of interactions [51]. 

Brown, A.J., Dean, R.T., and Jessup, W., 1996, Free and esteiified oxysterol formation during copper-oxidation of low density hpoprotein and uptake by macrophages, /. Lipid Res. 37 320-335. 

The precipitation of copper oxides in slightly alkaline solution should not be confused with the formation of the bright red crystals of the organocuprous complex. 

---