Considered construction

Finally, the facility is considering constructing new engineering offices near the process units. Guidance on the location of the new offices is also desired as part of the study. 

Priority measure is considered the reconstruction of operating small hydroelectric plants and restoration of existing small hydroelectric plants, which are the most suitable for further exploitation. When constructing small hydroelectric plants priority will be given to plants, which protect neighbor territories from flood. There may be considered construction of small hydroelectric plants on existing water bodies, for energy utilization in main canals, technical water supply systems and water drain. 

The process of protein production must be optimized for maximum yield while allowing the plant to function correctly without growth being adversely affected. When considering construct design one must consider carefully a number of factors as outlined below. 

We are considering construction of a pentaerythritol plant at Louisiana, Missouri. At the present time, we have an anhydrous ammonia plant located at Louisiana, Missouri, and we own sufficient land at this site to permit a large... 

As yet, we have not decided on the final plant capacity, but we are now considering construction of a small plant with a capacity of 60 tons of technical grade pentaerythritol per month. Any work you do on the design of this plant should be based on this capacity. 

The choice of exactly what surface area to calculate is, however, not entirely unambiguous. Although one might consider constructing a surface from standard atomic van der Waals radii, the more typical approach is to use the so-called solvent-accessible surface area (SASA)." 23,125 solvent-accessible surface is defined as that generated by the center of a spherical solvent molecule rolling on the van der Waals surface of the solute. A moment s reflection shows that this is the same as the exposed surface obtained by placing spheres at each of the atomic centers, where each sphere has a radius equal to the van der Waals radius of the atom plus the radius of a solvent molecule. For water, which is reasonably well approximated as a spherical solvent, the radius is usually taken as 1.4... 

First, let us consider constructions of masonry units (as acid brick) and mortar. 

A company is considering construction of a phosphoric acid plant employing Haifa process technology, which is to use its own byproduct hydrochloric acid for acidulation. Present-day cost of sulfuric acid is 110/tonne. 

To minimize functionality en route the self-consistent sequences should utilize the same functional groups for each step as much as possible. This demands maximum functional overlap of the reactive strands for each successive half-reaction on the synthon. It is indeed the application of this criterion of maximum functional overlap that creates the stringent reduction in choices for the self-consistent sequences since the functionality left by one half-reaction must be that required for the next when the reactive strands for the two overlap. Overlap can be total or partial, as explored in Section 12, but clearly the farther apart the construction sites on a synthon the less overlap there can be for the reactive strands of the two successive half-reactions, and consequently the less effective the reduction in the number of choices of available sequences. This is another reason for not considering construction spans over three in the patterns of Fig. 3. Construction sites beyond a span of three are considered separately in the protocol. 

Recommendation 2-2. The Army should consider constructing treatment facilities at other sites where large quantities of NSCWM are expected to be recovered. 

Life cycle thinking. Consider construction and demolition phases as well as the operation phase. 

Coal-fired power plants are the largest source of carbon dioxide emissions to the atmosphere. Hence, governments are likely to eventually limit carbon dioxide emissions, or place a significant tax on such emissions. This is the major concern when a coal-fired power plant is being evaluated for upgrade to comply with new emission regulations, or when considering construction of a new plant... 

Considers Construction (14). Referring back to equation 6 for the true and engineering stresses. 

Construction example A 36 inch valve that is one of three major components in a processing system is removed and replaced. To do the job, 50 percent of all parts in the system have to be cut, unbolted, moved, or otherwise altered or replaced. Removing and replacing this valve would be considered construction because the valve constitutes a major portion of the equipment it is in and much of the rest of the system s parts must be moved or altered in the process of doing the job. 

Obviously for the lower photon energies there could be appreciable air absorption if the distance between the sample and the WAXS detector is too large. In that case one can consider constructing a vacuum- or helium-chamber between the sample and the detector. When using SAXS this is in all cases required. 

Hence, one may consider construction of new molecular descriptors of very high discriminatory power specifically designed for screening combinatorial libraries one unsolved problem in this area. Observe that Lahana and coworkers used available molecular descriptors, most of which have limited discrimination powers and have been intended for use in MRA. There have been few molecular descriptors of very high discrimination power available, such as the molecular ID numbers [2,3-5], but they may not be suitable for screening combinatorial libraries because they are computationally intensive. 

Consider constructing a polycyclic molecule by expanding a chair cyclohexane. First, connect three of the axial bonds to a cap consisting of three methylene (CH2) groups all connected to a single methine (CH) group. This process... 

During site preparation work (which is considered construction work) OSHA has a fall protection height threshold of six feet. During rigging up and down (which is considered general industry work) the height requirement for fall protection is four feet. 

The research of Paul Crutzen, the third recipient of the Nobel Prize for Chemistry in 1995, involved the effect of nitric oxide (NO) on the destruction of stratospheric ozone. Unlike CFCs, which may take 50 to 100 years to diffuse into the upper atmosphere, nitric oxide is introduced directly to the stratosphere in the exhaust of high-altitude aircraft. Early in the 1970s, the United States considered construction of a large fleet of supersonic transport airplanes (SSTs), similar to the Concorde. Environmentalists argued, based in part on the work of Paul Crutzen, that to do so would significantly endanger the ozone layer. 

To consider construct-based validity, we have to address the question of what it is that accidents are measuring. This moves us to the consideration of accident causation. The logic is that accidents are providing us with information about a set of underlying processes that we label causes. 

The 17th edition of the lET Regulations considers construction sites very special locations, devoting the whole of Section 704 to their requirements. A construction site installation should be tested and inspected in accordance with Part 6 of the lET Regulations every three months throughout the construction period. 

To proceed we will concentrate on the Bloch equation, i.e. opt for the integration of thermal- and quantum fluctuations via appropriate incorporation of the temperature T. This is basically a complicated problem, since we are contending with non-equilibrium systems, yet one might all at once consider constructive interaction from the environment on our open system. In a few words an open or dissipative system is a system in which there exists a flow of entropy due to exchange of... 

---