Conduction OLEDs

Figure 13-4. Encigy level diagnim of a single-layer OLED, where the organic malerial is depicted as a fully depleted semiconductor. The valence band Ey corresponds to the HOMO and the conduction band Ec corresponds to the LUMO. Tile Fermi levels of the two metal electrodes are marked as Et-. Upon contact a built-in potential is established and needs to be compensated for, before the device will begin to operating.

Other materials such as gold (< = 4.9 eV), aluminum (< = 4.2 eV), indium-doped zinc oxide, magnesium indium oxide, nickel tungsten oxide, or other transparent conductive oxide materials, have been studied as anodes in OLEDs. Furthermore, the WF of ITO can be varied by surface treatments such as application of a very thin layer of Au, Pt, Pd, or C, acid or base treatments, self-assembly of active surface molecules, or plasma treatment. 

Figure 6.14 illustrates an OLED microcavity structure that comprises a stack of organic layers for providing EL, an upper electrode, and a bottom bilayer electrode of metal transparent conductive layer. The thickness of the transparent conductive layer (e.g., ITO) in the OLED structures can be varied across the substrate surface so as to achieve color tuning. One typical structure of the devices is glass/Ag/ITO (with a graded film... 

Important electrical informations about OLEDs, such as charge transport, charge injection, carrier mobility, etc., can be obtained from bias-dependent impedance spectroscopy, which in turn provides insight into the operating mechanisms of the OLED [14,15,73,75 78]. Campbell et al. reported electrical measurements of a PLED with a 50-nm-thick emissive layer [75], Marai et al. studied electrical measurement of capacitance-voltage and impedance frequency of ITO/l,4-Mv-(9-anthrylvinyl)-benzene/Al OLED under different bias voltage conditions [76], They found that the current is space-charge limited with traps and the conductivity exhibits power-law frequency dependence. 

The development of conducting polymers is naturally related to hopes of feasible technical applications. Thus, conducting polymers are discussed as active battery electrodes [10], electrochromic displays (BCD) [11], anticorrosives [12], sensors [13], electrocatalysts [14], antistatic materials [15], or light-emitting materials (OLED) [16],... 

---