Divinyl compounds

A polymer made by the RAFT process with a dithioester results in a dithioester end group. This ester can also be cleaved by aminolysis, resulting in a thiol terminated polymer. In an analogous way to the bis-maleimide compound, divinyl sulfone can be used, thereby creating a vinyl sulfone end group. This group is then able to react with cysteine groups by Michael addition (13) [135]. 

Reaction conditions depend on the reactants and usually involve acid or base catalysis. Examples of X include sulfate, acid sulfate, alkane- or arenesulfonate, chloride, bromide, hydroxyl, alkoxide, perchlorate, etc. RX can also be an alkyl orthoformate or alkyl carboxylate. The reaction of cycHc alkylating agents, eg, epoxides and a2iridines, with sodium or potassium salts of alkyl hydroperoxides also promotes formation of dialkyl peroxides (44,66). Olefinic alkylating agents include acycHc and cycHc olefinic hydrocarbons, vinyl and isopropenyl ethers, enamines, A[-vinylamides, vinyl sulfonates, divinyl sulfone, and a, P-unsaturated compounds, eg, methyl acrylate, mesityl oxide, acrylamide, and acrylonitrile (44,66). 

Finally, using divinyl compounds instead of diynes, surprisingly stable polypyrazolines (747) can be obtained. 

The synthetic problem is now reduced to cyclopentanone 16. This substance possesses two stereocenters, one of which is quaternary, and its constitution permits a productive retrosynthetic maneuver. Retrosynthetic disassembly of 16 by cleavage of the indicated bond furnishes compounds 17 and 18 as potential precursors. In the synthetic direction, a diastereoselective alkylation of the thermodynamic (more substituted) enolate derived from 18 with alkyl iodide 17 could afford intermediate 16. While trimethylsilyl enol ether 18 could arise through silylation of the enolate oxygen produced by a Michael addition of a divinyl cuprate reagent to 2-methylcyclopentenone (19), iodide 17 can be traced to the simple and readily available building blocks 7 and 20. The application of this basic plan to a synthesis of racemic estrone [( >1] is described below. 

Addition of heteroatomic nucleophiles to divinyl sulphoxides gives mono and bi-functionalized products as well as compounds resulting from their cyclization. For... 

Finely symmetrical divinyl tellurides 135, especially useful in transmetallation reactions, have been prepared in situ by sequential reaction of an excess of the ylide 134 with TeCl4 and aldehydes (Scheme 36) [134]. These compounds whatever their geometry lead in presence of -BuLi to the formation of -a,/l-unsat-urated aldehydes. 

A methacryl-type polyester macromonomer was synthesized by lipase PF-catalyzed polymerizahon of DDL using vinyl methacrylate as terminator ( terminator method ), in which the vinyl ester terminator was present from the beginning of the reachon (Scheme 17). In using divinyl sebacate as terminator, the telechelic polyester having a carboxylic acid group at both ends was obtained. Various non-protected thiol compounds were used as inihator or terminator for the thiol end-funchonalizahon of poly(8-CL). ... 

Nonlinear addition polymers are readily obtained by copolymerizing a divinyl compound (e.g., divinylbenzene) with the vinyl monomer (e.g., styrene), as already mentioned. Products so obtained exhibit the insolubility and other characteristics of space-network structures and are entirely analogous structurally to the space-network polymers produced by the condensation of polyfunctional compounds. Owing to... 

Superheated water at 100°-240 °C, with its obvious benefits of low cost and low toxicity, was proposed as a solvent for reversed-phase chromatography.59 Hydrophobic compounds such as parabens, sulfonamides, and barbiturates were separated rapidly on poly(styrene-divinyl benzene) and graphitic phases. Elution of simple aromatic compounds with acetonitrile-water heated at 30°-130 °C was studied on coupled colums of zirconia coated with polybutadiene and carbon.60 The retention order on the polybutadiene phase is essentially uncorrelated to that on the carbon phase, so adjusting the temperature of one of the columns allows the resolution of critical pairs of... 

The Davies group has described several examples of a rhodium-catalyzed decomposition of a diazo-compound followed by a [2+1] cycloaddition to give divinyl cyclopropanes, which then can undergo a Cope rearrangement. Reaction of the pyrrol derivative 6/2-51 and the diazo compound 6/2-52 led to the tropane nucleus 6/2-54 via the cyclopropane derivative 6/2-53 (Scheme 6/2.11) [201]. Using (S)-lactate and (R)-pari lolaclorie as chiral auxiliaries at the diazo compound, a diastereoselectivity of around 90 10 could be achieved in both cases. 

Civunin et al. [30-32] described synthesis of similar compounds, from the reaction of phosphorus pentachloride with divinyl ether (Scheme 2). 

Ruthenium-catalyzed ATRP was employed in the synthesis of PMMA-fr-PnBuMA block copolymers. Subsequent reaction with the divinyl compound 1 (Scheme 82) resulted in the synthesis of the star-block structures in almost quantitative yield [157]. The divinyl compound 2 was also employed for the Unking of PnBuMA-fr-PMMA through the PMMA blocks. Narrow molecular weight distribution products were obtained in all cases. 

The divinyl compound approach has been extensively covered in previous reviews. However, an interesting example for the synthesis of A2B2 4/z-stars, where A is either PI or PBd and B is PMMA or PBMA, has recently been prepared [177]. Following polymerization of the diene in hexane by s-BuLi,... 

The core first method starts from multifunctional initiators and simultaneously grows all the polymer arms from the central core. The method is not useful in the preparation of model star polymers by anionic polymerization. This is due to the difficulties in preparing pure multifunctional organometallic compounds and because of their limited solubility. Nevertheless, considerable effort has been expended in the preparation of controlled divinyl- and diisopropenylbenzene living cores for anionic initiation. The core first method has recently been used successfully in both cationic and living radical polymerization reactions. Also, multiple initiation sites can be easily created along linear and branched polymers, where site isolation avoids many problems. 

One method of achieving a polymerised polymer-network is by the use of two distinct types of compounds, a monomer and a crosslinker. A simple example of this combination is styrene as a monomer and divinyl... 

Ethyl 2,3-epoxypropanoate is a very interesting chiron. It may be opened by various organometallic compounds such as dialkyl, diaryl, and divinyl lithium cuprates, dialkylmagnesium cuprates, trialkylalanes and aluminum acetylides.5 6 The epoxide ring is attacked regiospecifically at the p-position and produces a-hydroxy esters exclusively without racemization. The same result is observed with... 

Similar intramolecular cycloadditions are encountered where an ether linkage has been incorporated into the met a or para linking groups 123. In these cyclizations the better yields were obtained from the para-attached systems. The yields obtained are again dependent on the chain length of the separator and are indicated below the appropriate structures (124)57. Other hetero-atom-substituted cyclophanes (125) can be obtained by irradiation of the divinyl compounds (126)58,59. The use of tin and germanium derivatives... 

A new, fast, sensitive, and solventless extraction technique was developed in order to analyze beer carbonyl compounds. The method was based on solid-phase microextraction with on-fiber derivatization. A derivatization agent, 0-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBOA), was absorbed onto a divinyl benzene/poly(dimethylsiloxane) 65- xm fiber and exposed to the headspace of a vial with a beer sample. Carbonyl compounds selectively reacted with PFBOA, and the oximes formed were desorbed into a gas chromatograph injection port and quantified by mass spectrometry. This method provided very high reproducibility and linearity When it was used for the analysis of aged beers, nine aldehydes were detected 2-methylpropanal, 2-methylbutanal, 3-methylbutanal, pentanal, hexanal, furfural, methional, phenylacetaldehyde, and (E)-2-nonenal. (107 words)... 

---