Cold-wet conditioning

Zebron is a polyurethane corrosion-resistant coating material available from ACO-Coatings. It is a solvent-free product that cures in cold wet conditions and can be rapidly applied to a high film thickness in one operation. The material provides a thick abrasion and water-resistant coating to steel or concrete. 

Forster-Knight, E., Lowth, R., Nngee, R., Carr, D., Iremonger, M. The ballistic performance of UK military helmets exposed to hot/wet and cold/wet conditions . Tenth International Conference on Composite Materials. V. Stractnres, Whistler, British Columbia, Canada, pp. 751-7, 14-18 August 1995. 

Direct contact with the liverworts leads to dermatitis around the wrists, up the forearms and on the face. Gloves are normally worn to protect the hands, but reactions on the hands can be observed when the insides of the gloves become contaminated. Workers in cold, wet conditions wear more clothing but can develop severe and widespread dermatitis if contaminated clothing is wetted through (Mitchell 1981,1986). 

For cold-dry and cold-wet conditioning, the samples were kept with or without water in a box in a refrigerator. For hot-dry conditioning, the samples... 

Cold, wet times in Greenland occurred with very cold, dry, windy conditions in Europe and North America along with very warm weather in the South Atlantic and Antarctica. This weather is indicated by studies of high mountain glaciers, the thickness of tree rings, and the types of pollen and shells found in mud at the bottoms of lakes and oceans. 

Losses of up to 60% in seven days following spreading have been recorded from digested sludge applied under adverse drying conditions in Canada (2) for example, and in Ireland, loss of 40-80% were measured from pig slurry over a similar period (20). With cow slurry, losses of 2.7 kg N ha-1 h 1 were found under warm dry conditions but significantly, under cold wet weather the losses were up to 0.3 kg N ha-1 If1, conditions which are conventionally assumed to minimise ammonia losses (3). 

Platinum Qxysulphide, PtOS. a H20, is obtained by allowing the disulphide in the wet condition to oxidise by exposure to air at about 70° to 100° C. with frequent stirring. The product is washed free from sulphuric acid, and dried at 100° C., 2 when it results as a black powder. It is a powerful oxidiser, effecting the oxidation of hydrogen, hydrogen sulphide and of sulphur dioxide in the cold. Ferrous salts are oxidised by it, on warming, to the ferric condition, and oxalic acid to carbon dioxide. 

Parasitization levels of 80-90% can be achieved by autumn. Only if weather conditions are poor in the spring (cold, wet weather) is the development of the parasites retarded. 

Interestingly, the relations between soil pH and N supply found along the short transect at Betsele are very much the same as those proposed by Read (1986 1991) as typical for long latitudinal and altitudinal gradients from polar/Alpine conditions through temperate coniferous forests and nemoral deciduous forests to dry and warm temperate steppe conditions. Read proposed that under cold and wet conditions, decomposition of organic matter would be slow and incomplete and result in the formation of acid, peaty soils or thick mor-layers with slow mineralization of organic... 

A HE AVAILABILITY AND UNIQUE PHYSICAL PROPERTIES of WOod have made it the material of choice since antiquity for the fabrication of shelters, tools, transportation devices, and objects of art (1). Although wood is among the most resistant of all organic materials, its usual environmental fate is eventual decay. Wooden objects are preserved for long periods of time only under extremely cold, wet, dry, or anoxic conditions. Because wooden artifacts provide a rich and varied record of our early activities and technology, the characterization and preservation of archaeological wood is a subject of wide interest. 

Select proper clothing for cold, wet, and windy conditions. 

Wear proper clothing for cold, wet, and windy conditions. Layer your clothing so you can adjust to changing temperatures. Wear a hat and gloves in addition to rmderwear that will keep water away from your skin (polypropylene). 

Trenchfoot got its name because the disorder was common among WWl troops who stood in cold water and mud in the trenches. Among civilians, trenchfoot can occur among workers exposed to wet conditions or those engaged in hiking and camping. 

The body loses heat to its surroundings in several different ways. Heat loss is greatest if the body is in direct contact with cold water. The body can lose twenty-five to thirty times more heat when in contact with cold, wet objects than under dry conditions or with dry clothing. The higher the temperatnre differences between the body snrface and cold objects, the faster the heat loss. Heat is also lost from the skin by contact with cold air. The rate of loss depends on the air speed and the temperatnre difference between the skin and the snrrounding air. At a given air temperature, heat loss increases with air speed. Sweat production and its evaporation from the skin also cause heat loss. This is important when performing hard work. 

Surfaces of specimens exposed to hot-dry/wet conditions exhibited yellowish discoloration while the cold-dry/wet conditioned samples retained their white opaque color. The extent of discoloration continuously increased with exposure time and was found to be optimum in hot-dry 80°C samples. Samples subjected to hot-dry 80°C turned dark yellow whereas the hot-wet conditioned samples were light yellowish. Exposure to an elevated temperature alters chemical and physical properties of composites, leading to lower glass transition temperature (Eg), discoloration and damage [57,58]. 

---