Chromium oxidants allylic oxidation

Table IV presents the results of the determination of polyethylene radioactivity after the decomposition of the active bonds in one-component catalysts by methanol, labeled in different positions. In the case of TiCU (169) and the catalyst Cr -CjHsU/SiCU (8, 140) in the initial state the insertion of tritium of the alcohol hydroxyl group into the polymer corresponds to the expected polarization of the metal-carbon bond determined by the difference in electronegativity of these elements. The decomposition of active bonds in this case seems to follow the scheme (25) (see Section V). But in the case of the chromium oxide catalyst and the catalyst obtained by hydrogen reduction of the supported chromium ir-allyl complexes (ir-allyl ligands being removed from the active center) (140) C14 of the...

The copper-chromium oxide has two different active sites in a reduced state. The cuprous ions associated with a hydride and two anionic vacancies are the hydrogenation (HYD) sites. The chromium ions in the same environment are the sites where occur the isomerization (I) and the hydrodeoxygenation (HDO) reactions. The use of unsaturated ethers permits to confirm and to precise the nature and the role of the active sites. With the compounds which have the oxygen atom kept away of the catalyst s surface, the HYD activity is very low and the HDO/I ratio too, whereas, in the opposite case, these values increase. With the vinylic ethers, the saturated compound is the main product because the I and the HDO reactions proceed via a concerted mechanism with a common preliminar step and an allylic rearrangement which is impossible with geminate functions. 

The overall mechanism of chromium(VI) allylic oxidation appears to craisist of removal of a hydrogen atom or hydride ion from the alkene, forming a resonance-stabilized allylic radical or carbocation, which is ultimately converted into die unsaturated ketone (Scheme 17). ... 

In a similar fiashion to the Collins reagent, PCC will also induce oxidative rearrangement of tertiary allylic alcohols (Table S). PCC, and several other chromium oxidants, will also cause tertiary cyclopropyl alcohols to rearrange to give 3,y-unsaturated carbonyl compounds (equation 8). ... 

Many chromium oxidants suffer from problems of stability, light sensitivity or acidity, but tetrakis(py-ridine)silver dichromate is stable, nonphotosensitive, nonhygroscopic and a neutral oxidant It can be used to oxidize allylic and benzylic alcohols selectively in benzene. Unfortunately, it cannot be used in chlorinated solvents because it decomposes in these solvents. 

One is left to ponder initiation by other organochromium catalysts. Chromium allyls or 2,4-dimethylpentadienylchromium(II) could conceivably rearrange into p-l coordination upon addition of ethylene. However, chromocene must initiate the first chain in some other way, because the site must retain the ring. Thus, for chromocene catalysts, the initiation problem is similar to that described for chromium oxide. The diarene-chromium(O) and Cr(0)(CO)6 catalysts may also have this problem. Perhaps this is why these catalysts sometimes initiate polymerization more sluggishly than the chromium alkyls. However, there is also some evidence that the Cr(0) compounds can be oxidized by surface OH groups to leave a Cr-H group, which could also be considered an alkylated species. 

Catalysts derived from organo-chromium compounds supported on silica gel are veiy different to the original Phillips chromium oxide catalyst. In the original catalysts one molecule of chromium oxide is bound to two silica units, to form the silyloxy chromate sites. In contrast, organo-chromium compounds are usually only bound to a single site on the sihca support and the other coordination sites are still occupied by the organic ligands. For example, tris-7t-allyl chromium reacts with a hydroxylated support, with the evolution of propylene and the formation of a bis-a-allyl chromium siloxy derivative. 

The formation of an epoxyketone (1) is generally favoured when the expected product of oxidation of an allylic alcohol is a cisoid enone. This type of reaction is promoted by acid conditions and may be prevented by using the chromium trioxide-pyridine reagent which gives only the unsaturated ketone (2) corresponding to the starting alcohol. ... 

Snatzke has found that a solution prepared from chromium trioxide and dimethylformamide with a small amount of sulfuric acid has similar chemical properties as the Sarett reagent. It is useful with acid sensitive compounds and oxidation occurs at such a moderate rate that selective oxidations are often possible. Although the position allylic to a A -double bond is not attacked, the 3-hydroxy-A -system cannot be oxidized satisfactorily to the cor-... 

The fact that pentacarbonyl carbene complexes react with enynes in a chemo-selective and regiospecific way at the alkyne functionality was successfully applied in the total synthesis of vitamins of the Kj and K2 series [58]. Oxidation of the intermediate tricarbonyl(dihydrovitamin K) chromium complexes with silver oxide afforded the desired naphthoquinone-based vitamin K compounds 65. Compared to customary strategies, the benzannulation reaction proved to be superior as it avoids conditions favouring (E)/(Z)-isomerisation within the allylic side chain. The basic representative vitamin K3 (menadione) 66 was synthesised in a straightforward manner from pentacarbonyl carbene complex 1 and propyne (Scheme 38). 

Dipyridiue-chromium(VI) oxide2 was introduced as an oxidant for the conversion of acid-sensitive alcohols to carbonyl compounds by Poos, Arth, Beyler, and Sarett.3 The complex, dispersed in pyridine, smoothly converts secondary alcohols to ketones, but oxidations of primary alcohols to aldehydes are capricious.4 In 1968, Collins, Hess, and Frank found that anhydrous dipyridine-chromium(VI) oxide is moderately soluble in chlorinated hydrocarbons and chose dichloro-methane as the solvent.5 By this modification, primary and secondary alcohols were oxidized to aldehydes and ketones in yields of 87-98%. Subsequently Dauben, Lorber, and Fullerton showed that dichloro-methane solutions of the complex are also useful for accomplishing allylic oxidations.6... 

We had two possible routes in which alcohol 72 could be used (Scheme 8.19). Route A would involve rearrangement of tertiary alcohol 72 to enone 76. Deprotonation at C5 and generation of the enolate followed by exposure to an oxaziridine or other oxygen electrophile equivalents might directly afford the hydrated furan C-ring of phomactin A (see 82) via hydroxy enone 81. We had also hoped to make use of a chromium-mediated oxidative rearrangement of tertiary allylic alcohols. Unfortunately, treatment of 72 to PCC produced only unidentified baseline materials, thereby quickly eliminating this route. 

When the reactant is cyclohexene, in the first step of Scheme 26, the direct hydrogen abstraction for the allylic oxidation (path 1) competes with the electron transfer (from the alkene to the M-oxo complex) for the epoxidation (path 2). Because the manganese complex is more readily reduced than the chromium... 

In the titanosilicate system, cyclic voltametric measurements had indicated (Section III.D) that the electron density at the tripodal sites is higher than at the tetrapodal sites. Hence, by analogy with the chromium and manganese complexes, we may expect the tripodal sites to favor hydrogen abstraction and allylic CH oxidation, although electron transfer and epoxidation occur preferentially on the tetrapodal sites. 

The synthesis of the smaller fragment methyl esters 144-147 was completed as depicted in Scheme 20. Chelation-controlled allylation of aldehydes 135-138 prepared by chromium(VI) oxidation of alcohols 122,123,133, and 134 with allyltrimethylsilane (139) in the presence of titanium(IV) chloride proceeded... 

Allylic chromium species can also add to aldehydes. In this regard, an efficient catalytic enantioselective variant using allylic halides as substrates and manganese as co-oxidant has been described recently (Eq. 117). This method provides high enantiomeric excesses in the simple allylation of a wide range of aliphatic, aromatic, and heteroaromatic aldehydes. Crotylation examples are also very enantioselective, albeit with modest anti/syn diastereoselectivity. 

---