Chromium hydrogenation

The carbon is oxidized (C2 to C2+) and the chromium is reduced (Cr6+ to Cr3+). Check to make sure you get the same oxidation numbers for the carbon and the chromium (hydrogen and oxygen are +1 and -2 respectively). 

Ven] Venkatraman, M., Neumann, J.P., The Cr-H (Chromium-Hydrogen System) , J. Phase Equi-lib., 12(6), 672-677 (1991) (Phase Relation, Crys. Stracture, Thermodyn., Review, 58)... 

The chromium center may be initiated by formation of a chromium-hydrogen bond (Cr + H-source —> Cr-H) to provide a Cr-hydride, which then reacts with ethylene (Cr-H + CH2=CH2- Cr-CH -CHj) to form a Cr-alkyl to initiate the polymerization process. One possible source of the hydrogen atom is a surface hydroxyl group (Si-OH) known to be present on the silica surface. 

Appreciable quantities are also obtained as a by-product in the manufacture of hydrogen from naphtha-gaseous hydrocarbons. In this process the gaseous hydrocarbon and superheated steam under a pressure of about 10 atmospheres and at a temperature of 1000 K are passed over a nickel-chromium catalyst. Carbon monoxide and hydrogen are produced ... 

Addition of dilute potassium dichromate(VI) solution, K2Cr207, to a solution of hydrogen peroxide produces chromium peroxide, CrOj, as an unstable blue coloration on adding a little ether and shaking this compound transfers to the organic layer in which it is rather more stable. 

Hence the orange colour of a dichromate is converted to the green colour of the hydrated chromium(III) ion, Cr ", and sulphur is precipitated when hydrogen sulphide is passed through an acid solution.)... 

Trimethylene dibromide (Section 111,35) is easily prepared from commercial trimethj lene glycol, whilst hexamethylene dibromide (1 O dibromohexane) is obtained by the red P - Br reaction upon the glycol 1 6-hexanediol is prepared by the reduction of diethyl adipate (sodium and alcohol lithium aluminium hydride or copper-chromium oxide and hydrogen under pressure). Penta-methylene dibromide (1 5-dibromopentane) is readily produced by the red P-Brj method from the commercially available 1 5 pentanediol or tetra-hydropyran (Section 111,37). Pentamethylene dibromide is also formed by the action of phosphorus pentabromide upon benzoyl piperidine (I) (from benzoyl chloride and piperidine) ... 

Hydrogenations with coppcr-chromium oxide catalyst are usually carried out in the liquid phase in stainless steel autoclaves at pressures up to 5000-6000 lb. per square inch. A solvent is not usually necessary for hydrogenation of an ester at 250° since the original ester and the alcohol or glycol produced serve as the reaction medium. However, when dealing with small quantities and also at temperatures below 200° a solvent is desirable this may be methyl alcohol, ethyi alcohol, dioxan or methylcyc/ohexane. 

Ammonia, anhydrous Mercury, halogens, hypochlorites, chlorites, chlorine(I) oxide, hydrofluoric acid (anhydrous), hydrogen peroxide, chromium(VI) oxide, nitrogen dioxide, chromyl(VI) chloride, sulflnyl chloride, magnesium perchlorate, peroxodisul-fates, phosphorus pentoxide, acetaldehyde, ethylene oxide, acrolein, gold(III) chloride... 

Hydrogen peroxide Copper, chromium, iron, most metals or their salts, alcohols, acetone, organic materials, flammable liquids, combustible materials... 

Nitric acid, fuming Organic matter, nonmetals, most metals, ammonia, chlorosulfonic acid, chromium trioxide, cyanides, dichromates, hydrazines, hydrides, HCN, HI, hydrogen sulflde, sulfur dioxide, sulfur halides, sulfuric acid, flammable liquids and gases... 

Germanium tetrachloride refined for use in making optical fibers is usually specified to contain less than 0.5 to 5 ppb of each of eight impurities vanadium, chromium, manganese, iron, cobalt, nickel, copper, and zinc. Limits are sometimes specified for a few other elements. Also of concern are hydrogen-bearing impurities therefore, maximum limits of 5 to 10 ppm are usually placed on HCl, OH, CH2, and CH contents. 

Hydrogen at elevated temperatures can also attack the carbon in steel, forming methane bubbles that can link to form cracks. Alloying materials such as molybdenum and chromium combine with the carbon in steel to prevent decarburization by hydrogen (132). 

Make acid yields coumaUc acid when treated with fuming sulfuric acid (19). Similar treatment of malic acid in the presence of phenol and substituted phenols is a facile method of synthesi2ing coumarins that are substituted in the aromatic nucleus (20,21) (see Coumarin). Similar reactions take place with thiophenol and substituted thiophenols, yielding, among other compounds, a red dye (22) (see Dyes and dye intermediates). Oxidation of an aqueous solution of malic acid with hydrogen peroxide (qv) cataly2ed by ferrous ions yields oxalacetic acid (23). If this oxidation is performed in the presence of chromium, ferric, or titanium ions, or mixtures of these, the product is tartaric acid (24). Chlorals react with malic acid in the presence of sulfuric acid or other acidic catalysts to produce 4-ketodioxolones (25,26). 

After penetration of the hide by the chromium the pH is raised to about 3.5—4.0. At this higher pH a change occurs in the chromium complexes as the basicity of the chromium increases and binding to the protein becomes possible. Chromium binds firmly to the protein forming a cross-link species, and as the pH increases the hydrogen is removed from the complex forming a stable stmcture. 

Aromatic rings in lignin may be converted to cyclohexanol derivatives by catalytic hydrogenation at high temperatures (250°C) and pressures (20—35 MPa (200—350 atm)) using copper—chromium oxide as the catalyst (11). Similar reduction of aromatic to saturated rings has been achieved using sodium in hquid ammonia as reductants (12). 

Chromium (ITT) can be analy2ed to a lower limit of 5 x 10 ° M by luminol—hydrogen peroxide without separating from other metals. Ethylenediaminetetraacetic acid (EDTA) is added to deactivate most interferences. Chromium (ITT) itself is deactivated slowly by complexation with EDTA measurement of the sample after Cr(III) deactivation is complete provides a blank which can be subtracted to eliminate interference from such ions as iron(II), inon(III), and cobalt(II), which are not sufficiently deactivated by EDTA (275). 

In past years, metals in dilute sulfuric acid were used to produce the nascent hydrogen reductant (42). Today, the reducing agent is hydrogen in the presence of a catalyst. Nickel, preferably Raney nickel (34), chromium or molybdenum promoted nickel (43), or supported precious metals such as platinum or palladium (35,44) on activated carbon, or the oxides of these metals (36,45), are used as catalysts. Other catalysts have been suggested such as molybdenum and platinum sulfide (46,47), or a platinum—nithenium mixture (48). 

---