Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chloride ion effect

Induced oxidation of alcohols by hydrogen peroxide was studied by Kolthoff and Medalia . According to their measurements the value of F-, increases with the increase in the concentration of ethanol, while it decreases with increase in the acid concentration (see Table 16). In acetic acid medium the value of F[ is considerably lower. Chloride ions effectively suppress the induced oxidation of alcohols. The main product of the oxidation of ethanol is acetaldehyde which can be further oxidized to acetic acid. The data on the induced oxidation of alcohol (H2A) can be interpreted by reactions (53), (98), (99) and (57). [Pg.565]

Fe(III) displacement of Al(III), Ga(III), or In(III) from their respective complexes with these tripodal ligands, have been determined. The M(III)-by-Fe(III) displacement processes are controlled by the ease of dissociation of Al(III), Ga(III), or In(III) Fe(III) may in turn be displaced from these complexes by edta (removal from the two non-equivalent sites gives rise to an appropriate kinetic pattern) (343). Kinetics and mechanism of a catalytic chloride ion effect on the dissociation of model siderophore-hydroxamate iron(III) complexes chloride and, to lesser extents, bromide and nitrate, catalyze ligand dissociation through transient coordination of the added anion to the iron (344). A catechol derivative of desferrioxamine has been found to remove iron from transferrin about 100 times faster than desferrioxamine itself it forms a significantly more stable product with Fe3+ (345). [Pg.121]

The simple motion of a bridging chloride from Pt(IV) to Pt(II) concomitant with motions of the exterior chloride ions effects the reversal of the oxidation states of the metal. Satisfactory though the insight implied by the above may be, it does not cover the important question of what the activation barrier to... [Pg.156]

Table V. Summary of Thickener Liquor Analysis from Chloride-Ion-Effect Tests... Table V. Summary of Thickener Liquor Analysis from Chloride-Ion-Effect Tests...
Table VI. Summary of Filter Cake Analysis Chloride-Ion-Effect Tests from ... Table VI. Summary of Filter Cake Analysis Chloride-Ion-Effect Tests from ...
Chang, J. C. S., "Pilot Plant Tests of Chloride Ion Effects on Wet FGD System Performance," EPA-600/7-84-039 (NTIS PB84-167584), March 1984. [Pg.199]

Kieffer and Gordon (120) also used the following reactions to explain the chloride ion effect on the rate law of Eq. 26 ... [Pg.220]

Kitchens, C.L., Chandler McLeod, M. and Roberts, C.B. (2005) Chloride ion effects on synthesis and direded assembly of copper nanopartides in liquid and compressed alkane microemulsion. Langmuir, 21, 5166-73. [Pg.64]

Sodium sulphate crystallises out in hydrated form (common ion effect) and is filtered off on concentration, sodium dichromate is obtained. For analytical purposes, the potassium salt. K2Cr20-. is preferred potassium chloride is added and the less soluble potassium dichromate obtained. [Pg.378]

Iron(III) chloride forms numerous addition compounds, especially with organic molecules which contain donor atoms, for example ethers, alcohols, aldehydes, ketones and amines. Anhydrous iron(III) chloride is soluble in, for example, ether, and can be extracted into this solvent from water the extraction is more effective in presence of chloride ion. Of other iron(III) halides, iron(III) bromide and iron(III) iodide decompose rather readily into the +2 halide and halogen. [Pg.394]

These are of two general kinds octahedral, pink complexes and tetrahedral, blue complexes. If cobalt(II) chloride is dissolved in aqueous solution, the predominant species is the hexaaquo-ion [ColHjO) ] (pink). If this solution is heated, it becomes blue, and the same effect is observed if chloride ion is added in excess. This colour change is associated with the change... [Pg.404]

Stuart S J and B J Berne 1996. Effects of Polarisability on the Hydration of the Chloride Ion. Journal of Physical Chemistry 100 11934-11943. [Pg.269]

AHopregnanolone and similar A-ring-reduced pregnanes potentiate GABA effects at these receptors. These steroids mimic the effects of the benzodiazepines, changing chloride ion conductance and producing sedative and hypnotic behavioral effects (276,277). Neuroactive steroids can be therapeutically useful as anticonvulsants, anxiolytics, or anesthetics (qv) (see also Hypnotics, sedatives, anticonvulsants, and anxiolytics). [Pg.222]

Sa.lts Salting out metal chlorides from aqueous solutions by the common ion effect upon addition of HCl is utilized in many practical apphcations. Typical data for ferrous chloride [13478-10-9] FeCl2, potassium chloride [7447-40-7] KCl, and NaCl are shown in Table 9. The properties of the FeCl2-HCL-H2 0 system are important to the steel-pickling industry (see Metal SURFACE TREATMENTS Steel). Other metal chlorides that are salted out by the addition of hydrogen chloride to aqueous solutions include those of magnesium, strontium, and barium. [Pg.442]

Acylation. Acylation is the most rehable means of introducing a 3-substituent on the indole ring. Because 3-acyl substituents can be easily reduced to 3-aLkyl groups, a two-step acylation—reduction sequence is often an attractive alternative to direct 3-aLkylation. Several kinds of conditions have been employed for acylation. Very reactive acyl haUdes, such as oxalyl chloride, can effect substitution directiy without any catalyst. Normal acid chlorides are usually allowed to react with the magnesium (15) or 2inc (16) salts. The Vilsmeier-Haack conditions involving an amide and phosphoms oxychloride, in which a chloroiminium ion is the active electrophile, frequentiy give excellent yields of 3-acylindoles. [Pg.85]

All lation. In alkylation, the dialkyl sulfates react much faster than do the alkyl haHdes, because the monoalkyl sulfate anion (ROSO ) is more effective as a leaving group than a haHde ion. The high rate is most apparent with small primary alkyl groups, eg, methyl and ethyl. Some leaving groups, such as the fluorinated sulfonate anion, eg, the triflate anion, CF SO, react even faster in ester form (4). Against phenoxide anion, the reaction rate is methyl triflate [333-27-7] dimethyl sulfate methyl toluenesulfonate [23373-38-8] (5). Dialkyl sulfates, as compared to alkyl chlorides, lack chloride ions in their products chloride corrodes and requires the use of a gas instead of a Hquid. The lower sulfates are much less expensive than lower bromides or iodides, and they also alkylate quickly. [Pg.198]

Methybcanthine Diuretics. The mild diuretic effect of drinking coffee, from caffeine, and tea, mainly from theophylline, has been recogni2ed for along time. But the methylxanthines (Table 5) are of very limited efficacy when used as diuretics. The excretion of sodium and chloride ions are increased, but the potassium excretion is normal. Methylxanthines do not alter the urinary pH. Even though the methylxanthines have been demonstrated to have minor direct effects in the renal tubules, it is beUeved that they exert their diuretic effects through increased renal blood flow and GER (71). [Pg.210]

Impurities in a corrodent can be good or bad from a corrosion standpoint. An impurity in a stream may act as an inhibitor and actually retard corrosion. However, if this impurity is removed by some process change or improvement, a marked rise in corrosion rates can result. Other impurities, of course, can have very deleterious effec ts on materials. The chloride ion is a good example small amounts of chlorides in a process stream can break down the passive oxide film on stainless steels. The effects of impurities are varied and complex. One must be aware of what they are, how much is present, and where they come from before attempting to recommena a particular material of construction. [Pg.2422]

It was found that sorbed palladium might catalyse reaction of Mn(III) reduction by Cf not only after it s removing from coal, but AC with palladium, Pd/AC, has also his own catalytic effect. On the base of dependence between characteristics of AC, chemical state of palladium on AC surface and catalytic action of Pd/AC in indicator reaction it might establish, that catalytic action concerns only to non-reduced or partly reduced palladium ions connected with chloride ions on coal surface. The presence or absence of catalytic action of Pd/AC in above-mentioned reaction may be proposed for determination of chemical state of palladium on AC surface. Catalytic effect was also used for palladium micro-amounts determination by soi ption-catalytic method. [Pg.70]


See other pages where Chloride ion effect is mentioned: [Pg.226]    [Pg.339]    [Pg.40]    [Pg.618]    [Pg.226]    [Pg.339]    [Pg.40]    [Pg.618]    [Pg.220]    [Pg.514]    [Pg.1169]    [Pg.140]    [Pg.222]    [Pg.407]    [Pg.409]    [Pg.280]    [Pg.156]    [Pg.416]    [Pg.281]    [Pg.207]    [Pg.210]    [Pg.158]    [Pg.296]    [Pg.163]    [Pg.229]   
See also in sourсe #XX -- [ Pg.181 ]

See also in sourсe #XX -- [ Pg.181 ]

See also in sourсe #XX -- [ Pg.181 ]

See also in sourсe #XX -- [ Pg.181 ]




SEARCH



Chloride effect

Chloride ions

Effects of Chloride Ions

© 2024 chempedia.info