Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chirality enantioselective epoxidation

In 1990, Jacobsen and subsequently Katsuki independently communicated that chiral Mn(III)salen complexes are effective catalysts for the enantioselective epoxidation of unfunctionalized olefins. For the first time, high enantioselectivities were attainable for the epoxidation of unfunctionalized olefins using a readily available and inexpensive chiral catalyst. In addition, the reaction was one of the first transition metal-catalyzed... [Pg.29]

Development of chiral, nonracemic dioxiranes for the catalytic enantioselective epoxidation of alkenes 99SL847. [Pg.244]

Asymmetric epoxidation of olefins with ruthenium catalysts based either on chiral porphyrins or on pyridine-2,6-bisoxazoline (pybox) ligands has been reported (Scheme 6.21). Berkessel et al. reported that catalysts 27 and 28 were efficient catalysts for the enantioselective epoxidation of aryl-substituted olefins (Table 6.10) [139]. Enantioselectivities of up to 83% were obtained in the epoxidation of 1,2-dihydronaphthalene with catalyst 28 and 2,6-DCPNO. Simple olefins such as oct-l-ene reacted poorly and gave epoxides with low enantioselectivity. The use of pybox ligands in ruthenium-catalyzed asymmetric epoxidations was first reported by Nishiyama et al., who used catalyst 30 in combination with iodosyl benzene, bisacetoxyiodo benzene [PhI(OAc)2], or TBHP for the oxidation of trons-stilbene [140], In their best result, with PhI(OAc)2 as oxidant, they obtained trons-stilbene oxide in 80% yield and with 63% ee. More recently, Beller and coworkers have reexamined this catalytic system, finding that asymmetric epoxidations could be perfonned with ruthenium catalysts 29 and 30 and 30% aqueous hydrogen peroxide (Table 6.11) [141]. Development of the pybox ligand provided ruthenium complex 31, which turned out to be the most efficient catalyst for asymmetric... [Pg.222]

Several catalysts that can effect enantioselective epoxidation of unfunctionalized alkenes have been developed, most notably manganese complexes of diimines derived from salicylaldehyde and chiral diamines (salens).62... [Pg.1088]

Scheme 12.10. Enantioselective Epoxidation with Chiral Manganese Catalysts3... Scheme 12.10. Enantioselective Epoxidation with Chiral Manganese Catalysts3...
A number of chiral ketones have been developed that are capable of enantiose-lective epoxidation via dioxirane intermediates.104 Scheme 12.13 shows the structures of some chiral ketones that have been used as catalysts for enantioselective epoxidation. The BINAP-derived ketone shown in Entry 1, as well as its halogenated derivatives, have shown good enantioselectivity toward di- and trisubstituted alkenes. [Pg.1102]

Scheme 12.13. Chiral Ketones Used for Enantioselective Epoxidation... Scheme 12.13. Chiral Ketones Used for Enantioselective Epoxidation...
The use of chiral a-fluoro ketone G can lead to enantioselective epoxidation.106... [Pg.1103]

A chiral diphosphine ligand was bound to silica via carbamate links and was used for enantioselective hydrogenation.178 The activity of the neutral catalyst decreased when the loading was increased. It clearly indicates the formation of catalytically inactive chlorine-bridged dimers. At the same time, the cationic diphosphine-Rh catalysts had no tendency to interact with each other (site isolation).179 New cross-linked chiral transition-metal-complexing polymers were used for the chemo- and enantioselective epoxidation of olefins.180... [Pg.261]

Kureshy developed a polymer-based chiral Mn-salen complex (Figure 21). Copolymerization of styrene, divinylbenzene, and 4-vinylpyridine generated highly cross-linked (50%) porous beads loaded with pyridine ligands at 3.8 mmol g-1. Once the polymer was charged with the metal complex catalyst, enantioselective epoxidation of styrene derivatives was achieved with ee values in the range 16 46%. 79... [Pg.463]

The use of alkylhydroperoxides as epoxidizing agents for allylic alcohols under catalytic conditions was soon expanded into enantioselective epoxidation with use of the more mild titanium alkoxides in the presence of chiral tartaric esters116. As concerns the epoxidation of functionalized dienes, these now so-called Sharpless conditions [Ti(OPr )4, dialkyl tartrate, TBHP] have been utilized to enantioselectively epoxidize 1,4-pentadiene-... [Pg.909]

Among many other methods for epoxidation of disubstituted E-alkenes, chiral dioxiranes generated in situ from potassium peroxomonosulfate and chiral ketones have appeared to be one of the most efficient. Recently, Wang et /. 2J reported a highly enantioselective epoxidation for disubstituted E-alkenes and trisubstituted alkenes using a d- or L-fructose derived ketone as catalyst and oxone as oxidant (Figure 6.3). [Pg.94]

ENANTIOSELECTIVE EPOXIDATION OF ( >(i-METHYLSTYRENE BY D2-SYMMETRIC CHIRAL TRANS-DIOXORUTHENIUM(VI) PORPHYRINS... [Pg.98]

A Z>2-symmetric chiral /ra/7,v-dioxoruthenium( VI) porphyrin, [RuVI(L1)02], bifa-cially encumbered by four threitol units can effect enantioselective epoxidation of (fs)- 3-methylstyrene in up to 70% ee. For the asymmetric styrene oxidation, a lower enantioselectivity of 40 % ee was obtained (c.f. 62 % ee, see Table 6.3) when... [Pg.100]

Although the Sharpless catalyst was extremely useful and efficient for allylic alcohols, the results with ordinary alkenes were very poor. Therefore the search for catalysts that would be enantioselective for non-alcoholic substrates continued. In 1990, the groups of Jacobsen and Katsuki reported on the enantioselective epoxidation of simple alkenes both using catalysts based on chiral manganese salen complexes [8,9], Since then the use of chiral salen complexes has been explored in a large number of reactions, which all utilise the Lewis acid character or the capacity of oxene, nitrene, or carbene transfer of the salen complexes (for a review see [10]). [Pg.305]

Baleizao, C. Gigante, B. Sabater, M. J. Garcia, H. Corma, A. (2002) On the activity of chiral chromium salen complexes covalently bound to solid silicates for the enantioselective epoxide ring o emag Applied Catalysis A General 228 279-288. [Pg.343]

In the presence of a catalytic amount of the optically active Mn(III)-saIen complexes 23 and 24, the enantioselective epoxidation of unfunctionalized olefins with the combined use of molecular oxygen and pivaMdehyde was demonstrated. This report revealed that the tert-butyl group on the C3 position of salicylaldehyde in the chiral ligand was essential to realize a high enantioselection, and that pivalaldehyde was the most effective reductant for both the enantioselectivity and chemical yield. It should be noted that the sence of enantioselectivity to form the epoxide from 1,2-... [Pg.40]

Although the chiral ketoiminatomanganese(lll) complexes were reported to catalyze the asymmetric aerobic alkene epoxidations, an aldehyde such as pivalaldehyde is required as a sacrihcial reducing agent. Groves reported that the dioxo(porphyrinato)ruthenium complexes 31, prepared with m-chloroperoxyben-zoic acid, catalyzed the aerobic epoxidation without any reductant. " On the basis of these reports, Che synthesized the optically active D4-porphyrin 35 and applied it to the truly aerobic enantioselective epoxidation of alkenes catalyzed by the chiral frani-dioxo (D4-porphyrinato)ruthenium(Vl) complex. The dioxoruthenium complex catalyzed the enantioselective aerobic epoxidation of alkenes with moderate to good enantiomeric excess without any reductant. In the toluene solvent, the turnovers for the epoxidation of T-(3-methylstyrene reached 20 and the ee of the epoxide was increased to 73% ee. [Pg.43]

Snapper and Hoveyda reported a catalytic enantioselective Strecker reaction of aldimines using peptide-based chiral titanium complex [Eq. (13.11)]. Rapid and combinatorial tuning of the catalyst structure is possible in their approach. Based on kinetic studies, bifunctional transition state model 24 was proposed, in which titanium acts as a Lewis acid to activate an imine and an amide carbonyl oxygen acts as a Bronsted base to deprotonate HCN. Related catalyst is also effective in an enantioselective epoxide opening by cyanide "... [Pg.389]

SCHEME 62. Titanium-catalyzed enantioselective epoxidation with different chiral hydroperoxides... [Pg.402]

Enantioselective epoxidation of allylic alcohols using hydrogen peroxide and chiral catalysts was first reported for molybdenum 7B) and vanadium 79) complexe. In 1980, Sharpless 80) reported a titanium system. Using a tartaric acid derivative as chiral auxiliary it achieves almost total stereoselection in this reaction. [Pg.180]

The enantioselective epoxidation of olefins has received much attention since the corresponding chiral epoxides have become important building units for the... [Pg.284]


See other pages where Chirality enantioselective epoxidation is mentioned: [Pg.19]    [Pg.255]    [Pg.205]    [Pg.206]    [Pg.87]    [Pg.263]    [Pg.543]    [Pg.19]    [Pg.516]    [Pg.29]    [Pg.66]    [Pg.33]    [Pg.35]    [Pg.39]    [Pg.43]    [Pg.55]    [Pg.8]    [Pg.772]    [Pg.51]    [Pg.255]    [Pg.394]    [Pg.402]    [Pg.1084]    [Pg.1148]    [Pg.125]    [Pg.156]   
See also in sourсe #XX -- [ Pg.88 , Pg.89 ]




SEARCH



Chiral enantioselectivity

Chiral epoxidations

Chiral epoxide

Chiral epoxides

Chirally enantioselectivity

Enantioselective epoxide

Enantioselectivity epoxidation

Epoxidation chiral

Epoxidation enantioselective

Epoxidations enantioselectivity

© 2024 chempedia.info