Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chemiluminescent reactions, efficiency

The first detailed investigation of the reaction kinetics was reported in 1984 (68). The reaction of bis(pentachlorophenyl) oxalate [1173-75-7] (PCPO) and hydrogen peroxide cataly2ed by sodium saUcylate in chlorobenzene produced chemiluminescence from diphenylamine (DPA) as a simple time—intensity profile from which a chemiluminescence decay rate constant could be determined. These studies demonstrated a first-order dependence for both PCPO and hydrogen peroxide and a zero-order dependence on the fluorescer in accord with an earher study (9). Furthermore, the chemiluminescence quantum efficiencies Qc) are dependent on the ease of oxidation of the fluorescer, an unstable, short-hved intermediate (r = 0.5 /is) serves as the chemical activator, and such a short-hved species "is not consistent with attempts to identify a relatively stable dioxetane as the intermediate" (68). [Pg.266]

Peroxyoxalate chemiluminescence is the most efficient nonenzymatic chemiluminescent reaction known. Quantum efficiencies as high as 22—27% have been reported for oxalate esters prepared from 2,4,6-trichlorophenol, 2,4-dinitrophenol, and 3-trif1uoromethy1-4-nitropheno1 (6,76,77) with the duorescers mbrene [517-51-1] (78,79) or 5,12-bis(phenylethynyl)naphthacene [18826-29-4] (79). For most reactions, however, a quantum efficiency of 4% or less is more common with many in the range of lO " to 10 ein/mol (80). The inefficiency in the chemiexcitation process undoubtedly arises from the transfer of energy of the activated peroxyoxalate to the duorescer. The inefficiency in the CIEEL sequence derives from multiple side reactions available to the reactive intermediates in competition with the excited state producing back-electron transfer process. [Pg.267]

Autooxidation. Liquid-phase oxidation of hydrocarbons, alcohols, and aldehydes by oxygen produces chemiluminescence in quantum yields of 10 to 10 ° ein/mol (128—130). Although the efficiency is low, the chemiluminescent reaction is important because it provides an easy tool for study of the kinetics and properties of autooxidation reactions including industrially important processes (128,131). The light is derived from combination of peroxyl radicals (132), which are primarily responsible for the propagation and termination of the autooxidation chain reaction. The chemiluminescent termination step for secondary peroxy radicals is as follows ... [Pg.269]

Tertiary peroxyl radicals also produce chemiluminescence although with lower efficiencies. For example, the intensity from cumene autooxidation, where the peroxyl radical is tertiary, is a factor of 10 less than that from ethylbenzene (132). The chemiluminescent mechanism for cumene may be the same as for secondary hydrocarbons because methylperoxy radical combination is involved in the termination step. The primary methylperoxyl radical terminates according to the chemiluminescent reaction just shown for (36), ie, R = H. [Pg.269]

To understand how these parameters affected the efficiency of the chemiluminescent reaction, we examined the mechanism originally proposed by Rauhut (26). As shown in Scheme 2, hydrogen peroxide reacts with an oxalate ester, such as 2,4,6-trichlorophenyl oxalate (TCPO), in a two-step process to form a reactive intermediate for which Rauhut suggested structure 1, the 1,2-dioxetanedione. The dioxetanedione then interacts with an acceptor (ACC) to produce two molecules of COj and the excited state of the acceptor. The last stage of the sequence is fluorescence emission from the acceptor. [Pg.140]

The chemiluminescence reaction of esters of oxalic acid can proceed within a wider pH range than for luminol. However, the most efficient oxalate derivatives are only soluble in organic solvents such as ethyl acetate, acetonitrile, dioxane or dimethoxyethane and dissolution problems of these solvents in aqueous media are encountered. This can limit the use of this chemiluminescence reaction for a direct coupling to an H202-generating enzymatic reaction. [Pg.160]

Cx electronically excited product) depends on the efficiency es of the production of excited product molecules, and on the efficiency of the excited product molecules (or other molecules present in the reaction mixture) in transforming excitation energy into light. In most of the chemiluminescence reactions investigated so far this efficiency is identical with the fluorescence efficiency of the molecules concerned, so that... [Pg.67]

Brundrett, Roswell, and White 12> subdivide the efficiency es, the chemical efficiency of a chemiluminescent reaction, into the efficiency r (fraction of molecules following the correct chemistry) and the efficiency es (fraction of molecules crossing over to the excited state after having taken the correct chemical path). [Pg.67]

Recent investigations (see e.g. 12>13>) therefore make a special point of differentiating as far as possible between the chemical and physical efficiencies of chemiluminescence reactions. [Pg.67]

Chemiluminescent reactions must proceed at a sufficiently fast rate to provide the minimum number of quanta per time unit, as determined by the sensitivity of the detector used. According to Hercules 4> a chemiluminescence reaction with 100% efficiency emitting only one photon per fortnight would not be detected . [Pg.69]

Dialkylamino phthalic acids resulting from the chemiluminescence reaction of 4-dialkylamino-phthalic hydrazides cannot easily form a tris anion because deprotonation of the amino group is impossible. They should therefore not exhibit such a strong decrease in fluorescence efficiency at higher pH values. This can actually be concluded from the pH dependence of the chemiluminescence of the 4-dialkylamino-phthalic hydrazides and related compounds 97>. [Pg.100]

If cl is the efficiency of the chemiluminescent reaction, which is the ratio of the number of photons emitted to the number of molecules of reactant reacting in toto, it can be defined for a type I reaction as... [Pg.77]

Lophine emits yellow CL upon oxidation by molecular oxygen in alkaline solution. The oxidation is believed to produce a free radical [3], which is further oxidized to a hydroperoxide, which is the light-emitting species [4-6], A number of chemiluminescent derivatives of lophine have been synthesized and have been shown to exhibit varying efficiencies of CL. Lophine has been used in the analysis of metal ions such as Co2+ that catalyze the chemiluminescent reaction between it and hydrogen peroxide [7], It has also been used as a chemiluminescent indicator in titrimetry [8],... [Pg.106]

The oxidation of luminol in basic solution is one of the best known and most efficient chemiluminescent reactions, having a quantum yield of CL of about 0.01 in water and 0.05 in DMSO. [Pg.108]

The leaving group of the oxalic ester has a strong effect on the efficiency of the peroxyoxalate chemiluminescent system. The electron-attracting power of the substituents on the phenyl rings of the substituted diphenyl oxalates is important to the overall efficiency of the chemiluminescent reactions. Steric effects... [Pg.111]

Leaving groups other than phenols were also found to be effective in producing moderately efficient chemiluminescent reactions [26, 27],... [Pg.112]

A wide variety of different classes of fluorescent molecules has been investigated in the peroxyoxalate chemiluminescent systems. Among those screened were fluorescent dyes such as rhodamines and fluoresceins, heterocyclic compounds such as benzoxazoles and benzothiazoles, and a number of polycyclic aromatic hydrocarbons such as anthracenes, tetracenes, and perylenes. The polycyclic aromatic hydrocarbons and some of their amino derivatives appear to be the best acceptors as they combine high fluorescence efficiency with high excitation efficiency in the chemiluminescent reaction [28],... [Pg.112]

The analytical detectability applying a CL method should, in principle, be comparable to that obtained using radioactive labels, without all the disadvantages related to the use of isotopic labeling. In fact, assuming reasonable values for the quantum efficiency of the chemiluminescent reaction (Cl 0.01), for the overall photon collection efficiency of the optical system-CCD camera assembly (T) 0.01%), and for the intensity of the lowest detectable CL signal (about... [Pg.481]

Intramolecular electron transfer initiated peroxide decomposition. . 1236 HIGH-EFFICIENCY ORGANIC CHEMILUMINESCENT REACTIONS INVOLVING PEROXIDE INTERMEDIATES. 1238... [Pg.1211]

VI. HIGH-EFFICIENCY ORGANIC CHEMILUMINESCENT REACTIONS INVOLVING PEROXIDE INTERMEDIATES... [Pg.1238]

The chemiluminescence emission resulting from the oxidation of luminol (5-amino-2,3-dihydro-l,4-phthalazinedione) has been extensively studied since its discovery by Albrecht in 1928. Although luminol oxidation is one of the most commonly applied chemiluminescent reactions, to date no definitive mechanism is known . Efficient chemiluminescence emission is only observed when luminol (25) is oxidized under alkaline conditions. Depending on the medium, co-oxidants are required in addition to molecular oxygen for the observation of light emission, but under any condition, 3-aminophthalate (3-AP) and molecular nitrogen are the main reaction products (equation 10). [Pg.1239]


See other pages where Chemiluminescent reactions, efficiency is mentioned: [Pg.262]    [Pg.262]    [Pg.127]    [Pg.137]    [Pg.140]    [Pg.146]    [Pg.363]    [Pg.67]    [Pg.350]    [Pg.354]    [Pg.384]    [Pg.386]    [Pg.475]    [Pg.145]    [Pg.1217]    [Pg.1257]    [Pg.1211]    [Pg.1217]    [Pg.1257]    [Pg.265]    [Pg.350]    [Pg.354]   
See also in sourсe #XX -- [ Pg.137 ]




SEARCH



Chemiluminescence chemiluminescent reactions

Chemiluminescence reaction

Chemiluminescent reactions

Peroxyoxalate reaction, chemiluminescence efficiency

Reaction efficiency

© 2024 chempedia.info