Chemical properties metallurgy

In many areas of chemistry and chemical technology there exists a need to know the properties of salts at high temperatures. These areas include chemical synthesis, metallurgy, corrosion by salts, and catalysis. 

Preparation of Cobalt.—The metallurgy of cobalt is complicated by the fact that cobalt ores invariably contain a certain amount of nickel. Since these two metals closely resemble one another in their chemical properties it will be evident that their complete separation on a commercial scale is a matter of considerable difficulty. It is not usually required, however. The details of the actual methods employed in the commercial production of cobalt are kept fairly secret, more particularly as regards the initial stages of the preparation of the crude oxide. We shall, therefore, content ourselves by giving in outline accounts of a few different methods that may be employed. It is convenient to discuss the subject in three sections, namely ... 

Secondary metallurgy takes place exclusively in the ladle and consists of all further measures required to improve the mechanical and chemical properties to produce high-grade steel. 

The scientific basis of extractive metallurgy is inorganic physical chemistry, mainly chemical thermodynamics and kinetics (see Thermodynamic properties). Metallurgical engineering reties on basic chemical engineering science, material and energy balances, and heat and mass transport. Metallurgical systems, however, are often complex. Scale-up from the bench to the commercial plant is more difficult than for other chemical processes. 

Chemical appHcations of Mn ssbauer spectroscopy are broad (291—293) determination of electron configurations and assignment of oxidation states in stmctural chemistry polymer properties studies of surface chemistry, corrosion, and catalysis and metal-atom bonding in biochemical systems. There are also important appHcations to materials science and metallurgy (294,295) (see Surface and interface analysis). 

The most chemical-resistant plastic commercially available today is tetrafluoroethylene or TFE (Teflon). This thermoplastic is practically unaffected by all alkahes and acids except fluorine and chlorine gas at elevated temperatures and molten metals. It retains its properties up to 260°C (500°F). Chlorotrifluoroethylene or CTFE (Kel-F, Plaskon) also possesses excellent corrosion resistance to almost all acids and alkalies up to 180°C (350°F). A Teflon derivative has been developed from the copolymerization of tetrafluoroethylene and hexafluoropropylene. This resin, FEP, has similar properties to TFE except that it is not recommended for continuous exposures at temperatures above 200°C (400°F). Also, FEP can be extruded on conventional extrusion equipment, while TFE parts must be made by comphcated powder-metallurgy techniques. Another version is poly-vinylidene fluoride, or PVF2 (Kynar), which has excellent resistance to alkahes and acids to 150°C (300°F). It can be extruded. A more recent development is a copolymer of CTFE and ethylene (Halar). This material has excellent resistance to strong inorganic acids, bases, and salts up to 150°C. It also can be extruded. 

Figure 8.1 Effect of pH on corrosion of 1100-H14 alloy (aluminum) by various chemical solutions. Observe the minimal corrosion in the pH range of 4-9. The low corrosion rates in acetic acid, nitric acid, and ammonium hydroxide demonstrate that the nature of the individual ions in solution is more important than the degree of acidity or alkalinity. (Courtesy of Alcoa Laboratories from Aluminum Properties and Physical Metallurgy, ed. John E. Hatch, American Society for Metals, Metals Park, Ohio, 1984, Figure 19, page 295.)...

Subject areas for the Series include solutions of electrolytes, liquid mixtures, chemical equilibria in solution, acid-base equilibria, vapour-liquid equilibria, liquid-liquid equilibria, solid-liquid equilibria, equilibria in analytical chemistry, dissolution of gases in liquids, dissolution and precipitation, solubility in cryogenic solvents, molten salt systems, solubility measurement techniques, solid solutions, reactions within the solid phase, ion transport reactions away from the interface (i.e. in homogeneous, bulk systems), liquid crystalline systems, solutions of macrocyclic compounds (including macrocyclic electrolytes), polymer systems, molecular dynamic simulations, structural chemistry of liquids and solutions, predictive techniques for properties of solutions, complex and multi-component solutions applications, of solution chemistry to materials and metallurgy (oxide solutions, alloys, mattes etc.), medical aspects of solubility, and environmental issues involving solution phenomena and homogeneous component phenomena. 

---