Chemical interferences flame photometry

Atomic absorption takes advantage of the fact that most of the atoms remain in the ground state, and are capable of absorbing radiation of the appropriate wavelength corresponding to Ah. Whereas a hot flame is preferred for flame photometry, a cooler flame is preferred for atomic absorption, except in cases where chemical interference may occur. 

Atomic absorption spectrometry is one of the most widely used techniques for the determination of metals at trace levels in solution. Its popularity as compared with that of flame emission is due to its relative freedom from interferences by inter-element effects and its relative insensitivity to variations in flame temperature. Only for the routine determination of alkali and alkaline earth metals, is flame photometry usually preferred. Over sixty elements can be determined in almost any matrix by atomic absorption. Examples include heavy metals in body fluids, polluted waters, foodstuffs, soft drinks and beer, the analysis of metallurgical and geochemical samples and the determination of many metals in soils, crude oils, petroleum products and plastics. Detection limits generally lie in the range 100-0.1 ppb (Table 8.4) but these can be improved by chemical pre-concentration procedures involving solvent extraction or ion exchange. 

The development of fast and accurate procedures for the determination of calcium in biological materials represents one of the important early achievements of atomic absorption spectroscopy. The diflBculties encountered with calcium in emission flame photometry are well known (Dll, L6, S6, SIO), but spectral interferences and extreme dependency on flame temperature, serious obstacles in emission, are either nonexistent or of lower importance in absorption. Chemical interferences, however. 

Regarding historical insight and descriptions of principles and fundamentals of flame atomic emission spectrometry, a chapter on flame photometry appeared in the first edition of Treatise on Analytical Chemistry (Vallee and Thiers 1965) covering the flame and burner, photometer/spec-trometer, fundamental discussion of excitation and processes within the flame, cation and anion interferences and handling of analytical samples. In an analogous, expanded, detailed and excellent treatment of EAES in the second edition of the Treatise on Analytical Chemistry, Syty (1981) discusses types of flames used for excitation, processes within flames, spectral, chemical and physical interferences and remedies. 

What is meant by chemical interference Compare flame photometry, arc/ spark, ICP, and GD sources in the amount of chemical interference exhibited by each technique. 

The advantages of this technique over emission flame photometry lie in the fact that the interferences due to physical inter-element effects, background radiation and scattered light are absent. Unfortunately chemical interferences still exist so that the effect of phosphate on the absorption of the calcium line is the same as its effect on the emission. 

---