Reaction charge-transfer

Hamilton C E, Bierbaum V M and Leone S R 1985 Product vibrational state distributions of thermal energy charge transfer reactions determined by laser-induced fluorescence in a flowing afterglow Ar" + CC -> CC (v= 0-6) + Ar J. Chem. Rhys. 83 2284-92... 

Sonnenfroh D M and Leone S R 1989 A laser-induced fluorescence study of product rotational state distributions in the charge transfer reaction Ar <-i. i, ) + Ni Ar + MfXjat 0.28 and 0.40 eV J. them. Phys. 90 1677-85... 

So far we have exclusively discussed time-resolved absorption spectroscopy with visible femtosecond pulses. It has become recently feasible to perfomi time-resolved spectroscopy with femtosecond IR pulses. Flochstrasser and co-workers [M, 150. 151. 152. 153. 154. 155. 156 and 157] have worked out methods to employ IR pulses to monitor chemical reactions following electronic excitation by visible pump pulses these methods were applied in work on the light-initiated charge-transfer reactions that occur in the photosynthetic reaction centre [156. 157] and on the excited-state isomerization of tlie retinal pigment in bacteriorhodopsin [155]. Walker and co-workers [158] have recently used femtosecond IR spectroscopy to study vibrational dynamics associated with intramolecular charge transfer these studies are complementary to those perfomied by Barbara and co-workers [159. 160], in which ground-state RISRS wavepackets were monitored using a dynamic-absorption technique with visible pulses. 

Charge-exchange reaction. Synonymous with charge-transfer reaction. 

Partial charge-transfer reaction. An ion/neutral reaction that reduces the charge on a multiply charged reaction ion. 

The detailed mechanism of battery electrode reactions often involves a series of chemical and electrochemical or charge-transfer steps. Electrode reaction sequences can also include diffusion steps on the electrode surface. Because of the high activation energy required to transfer two electrons at one time, the charge-transfer reactions are beheved to occur by a series of one electron-transfer steps illustrated by the reactions of the 2inc electrode in strongly alkaline medium (41). 

Electrochemical systems convert chemical and electrical energy through charge-transfer reactions. These reactions occur at the interface between two phases. Consequendy, an electrochemical ceU contains multiple phases, and surface phenomena are important. Electrochemical processes are sometimes divided into two categories electrolytic, where energy is supplied to the system, eg, the electrolysis of water and the production of aluminum and galvanic, where electrical energy is obtained from the system, eg, batteries (qv) and fuel cells (qv). 

In electrode kinetics a relationship is sought between the current density and the composition of the electrolyte, surface overpotential, and the electrode material. This microscopic description of the double layer indicates how stmcture and chemistry affect the rate of charge-transfer reactions. Generally in electrode kinetics the double layer is regarded as part of the interface, and a macroscopic relationship is sought. For the general reaction... 

The electrodeposition of Ag has also been intensively investigated [41 3]. In the chloroaluminates - as in the case of Cu - it is only deposited from acidic solutions. The deposition occurs in one step from Ag(I). On glassy carbon and tungsten, three-dimensional nucleation was reported [41]. Quite recently it was reported that Ag can also be deposited in a one-electron step from tetrafluoroborate ionic liquids [43]. However, the charge-transfer reaction seems to play an important role in this medium and the deposition is not as reversible as in the chloroaluminate systems. 

Interfacial Charge Transfer Reactions in Colloidal Dispersions and Their Application to Water Cleavage by Visible Light Gratzel, M. 15... 

The Role of the Electronic Factor in the Kinetics of Charge-Transfer Reactions German, E. D. Kuznetsov, A. M. 24... 

The experimental setup is depicted schematically in Figure 1.2. Upon varying the potential of the catalyst/working electrode the cell current, I, is also varied. The latter is related to the electrocatalytic (net-charge transfer) reaction rate re via re=I/nF, as well known from Faraday s law. The electrocatalytic reactions taking place at the catalyst/solid electrolyte/gas three-phase-boundaries (tpb), are ... 

One can only admire the insight of the first researchers who used Ni as the active electrode material in the Ni/YSZ cermet anodes In addition to being a good electrocatalyst for the charge transfer reaction (3.8), Ni is also an excellent catalyst for the steam or C02-reforming of methane ... 

In both designs the catalyst-working electrode acts simultaneous as a catalyst for the catalytic reaction (e.g. C2H4 oxidation by gaseous 02) and as an electrode for the electrochemical charge transfer reaction ... 

The reference electrode-solid electrolyte interface must also be non-polarizable, so that rapid equilibration is established for the electrocatalytic charge-transfer reaction. Thus it is generally advisable to sinter the counter and reference electrodes at a temperature which is lower than that used for the catalyst film. Porous Pt and Ag films exposed to ambient air have been employed in most previous NEMCA studies.1,19... 

In the latter case one would like to know the length Apb of the metal-solid electrolyte-gas three-phase-boundaries (tpb) (in m or in metal mols, for which we use the symbol Ntpb throughout this book) and the value of the exchange current I0, where (W2F) expresses the value of the (equal and opposite under open-circuit conditions) forward and reverse rates of the charge-transfer reaction 4.1. 

The activation overpotential Tiac,w is due to slow charge transfer reactions at the electrode-electrolyte interface and is related to current via the Butler-Volmer equation (4.7). A slow chemical reaction (e.g. adsorption, desorption, spillover) preceding or following the charge-transfer step can also contribute to the development of activation overpotential. 

The concentration overpotential T]C0nC)W is due to slow mass transfer of reactants and/or products involved in the charge-transfer reaction. There... 

Due to the small amplitude of the superimposed voltage or current, the current-voltage relationship is linear and thus even charge-transfer reactions, which normally give rise to an exponential current-potential dependence (Chapter 4), appear as resistances, usually coupled with a capacitance. Thus any real ohmic resistance associated with the electrode will appear as a single point, while a charge transfer reaction (e.g. taking place at the tpb) will appear ideally as a semicircle, i.e. a combination of a resistor and capacitor connected in parallel (Fig. 5.29). 

Figure 5.30 exemplifies such a behaviour of a Pd catalyst electrode deposited on YSZ and exposed to CH4/02 mixtures.54 The resistance R is associated with the ohmic resistance of the electrode while the semicircles labeled Q and Ci- are associated with the charge transfer reaction... 

In aqueous electrochemistry electrochemical (charge transfer) reactions take place over the entire metal/electrolyte interface. 

This equation is always valid at steady state and has been originally derived for the case of NEMCA in alkaline solutions.37 In the present case of the acidic environment in the Nafion electrolyte the following two electrocatalytic (net charge transfer) reactions take place at the Pt working electrode, presumably at the three-phase-boundaries (tpb) Pt-Nafion-gas ... 

When a positive current I is applied between the catalyst-electrode and the Pt counter-electrode, then the catalyst potential Urhe changes to more positive values (Fig. 10.1) and the following electrochemical (net charge-transfer) reactions take place at the Pt catalyst-electrode surface ... 

The catalytic (no net charge transfer) reaction which is electrochemically promoted is ... 

Electrocatalysis refers to acceleration of a charge transfer reaction and is thus restricted to Faradaic efficiency, A, values between -1 and 1. Electrochemical promotion (NEMCA) refers to electrocatalytically assisted acceleration of a catalytic (no net charge-transfer) reaction, so that the apparent Faradaic efficiency A is not limited between -1 and 1. 

The problems of distinguishing H+ produced from H2 by electron impact from the product of dissociative charge transfer reactions between He + and H2 can be studied by determining the kinetic energy distribution in the product H+ (6). The reaction He+ + H2 is exothermic by 6.5 e.v. if the products are atoms or atomic ions. If the reaction is studied with HD substituted for H2, then the maximum kinetic energy that can be deposited in the D + is approximately 2.16 e.v. On the other hand, D + can be produced by electron impact with 5.5 e.v. kinetic energy. If a retarding potential is applied at the repeller in the ion-source of a mass spectrometer, then it is possible to obtain curves related to the kinetic... 

---