Carboxamides from esters

The aminolysis of esters of pyrimidine occurs normally to yield amides. The reagent is commonly alcoholic ammonia or alcoholic amine, usually at room temperature for 20-24 hours, but occasionally under refiux aqueous amine or even undiluted amine are used sometimes. The process is exemplified in the conversion of methyl pyrimidine-5-carboxylate (193 R = Me) or its 4-isomer by methanolic ammonia at 25 °C into the amide (196) or pyrimidine-4-carboxamide, respectively (60MI21300), and in the butylaminolysis of butyl ttracil-6-carboxylate (butyl orotate) by ethanolic butylamine to give A-butyluracil-5-carboxamide (187) (60JOC1950). Hydrazides are made similarly from esters with ethanolic hydrazine hydrate. 

The addition of Grignard reagents to aldehydes, ketones, and esters is the basis for the synthesis of a wide variety of alcohols, and several examples are given in Scheme 7.3. Primary alcohols can be made from formaldehyde (Entry 1) or, with addition of two carbons, from ethylene oxide (Entry 2). Secondary alcohols are obtained from aldehydes (Entries 3 to 6) or formate esters (Entry 7). Tertiary alcohols can be made from esters (Entries 8 and 9) or ketones (Entry 10). Lactones give diols (Entry 11). Aldehydes can be prepared from trialkyl orthoformate esters (Entries 12 and 13). Ketones can be made from nitriles (Entries 14 and 15), pyridine-2-thiol esters (Entry 16), N-methoxy-A-methyl carboxamides (Entries 17 and 18), or anhydrides (Entry 19). Carboxylic acids are available by reaction with C02 (Entries 20 to 22). Amines can be prepared from imines (Entry 23). Two-step procedures that involve formation and dehydration of alcohols provide routes to certain alkenes (Entries 24 and 25). 

Bromopyridine undergoes photoassisted SrnI reaction with a variety of stabilized carbanions <1997JOC6152>. The reaction is carried out in the presence of potassium amide in liquid ammonia at —33 °C under photoirradiation at 350 nm and proceeds in moderate to good yield with anions derived from 2-benzyl-4,4-dimethyloxazoline, 2,4-dialkylthiazoles, and dimethyl methylphosphonate and also with carboxamide and ester enolates. 

Carboxamides of the tricyclic compounds 244 (n = 1, R = CONH2) and 389 (w = 1, R = CONH2) were obtained from the appropriate esters or from carboxylic acids with ammonia, via mixed anhydrides. N-Substi-tuted carboxamides of the pyrido[l,2-fl]quinazolinones 211 (R = CONHR ) were prepared directly from the corresponding acids with amines in the presence of diphenylphosphoryl azide and triethylamine in dimethyl-formamide at — S C " or were obtained from esters with amines. ... 

B/C, whereby the molecule assumes a sigmoidal conformation that allows both head groups to interact in identical mode with the SI pockets (Fig. 2.13). The (4-amino-methyl)benzyl group inserts into the SI pockets to a 2.6 A distance from the Asp 189 carboxylate, and additional hydrogen bonds with residues of the protease surface are coordinating the carboxamide and ester groups, while the hydrophobic spacer acts as an optimal tether (Figs. 2.13 and 2.14). 

Amides from Esters Hydrolysis of Ureides Hydrolysis of Carbamates Hydrolysis of Carboxamides Decarboxylation ... 

On the other hand, thiazolo[5,4-d] pyrimidines also obtained from 5-aminothiazole derivatives, are prepared from aminomalononitrile (or its derivatives) and isothiocyanates [141] or thioesters [142]. The next to 5-amino and 4-cyano (or conforming carboxamide or ester groups) on the thiazole ring are proper functionalities to concept a fused pyrimidine ring system. 7-Aminothiazolo[5,4-d]pyrimidines can be prepared from 5-amino-4-cyanothiazoles by reaction... 

Exploratory experiments have shown that glycosylidene carbenes also insert into the N-H bond of sulfonamides, whereas carboxamides yield esters, as illustrated by the product obtained from an A-Boc-asparagine benzyl ester (Figure 7c) [32]. Presumably, such esters are formed by hydrolysis of the initially formed imino ether 0-glycosides, suggesting that glycosylidene diazirines may be used for (selective ) cleavage of peptidic bonds. 

Pyridazinecarboxamides are prepared from the corresponding esters or acid chlorides with ammonia or amines or by partial hydrolysis of cyanopyridazines. Pyridazinecarboxamides with a variety of substituents are easily dehydrated to nitriles with phosphorus oxychloride and are converted into the corresponding acids by acid or alkaline hydrolysis. They undergo Hofmann degradation to give the corresponding amines, while in the case of two ortho carboxamide groups pyrimidopyridazines are formed. 

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. 

The A-substituted derivatives of 4-oxo-4//-pyrido[l,2-n]pyrimidine-3-carboxamides and -3-acetamides and l,6-dimethyl-4-oxo-1,6,7,8-tetrahy-dro-4//-pyrido[l,2-n]pyrimidine-3-carboxamide were prepared by treatment of the appropriate 3-carboxylic acids and acetic acid, first with an alkyl chloroformate in the presence ofNEt3 in CHCI3 below — 10°C, then with an amine (98ACH515). A-Phenethyl and A-[2-(3,4-dimethoxyphenyl)ethyl] derivatives of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetamide were obtained in the reaction of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l,2-n]pyrimidine-3-acetic acid and phenethylamines in boiling xylene under a H2O separator. Hydrazides of 4-oxo-4//- and 4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic acid were prepared from the appropriate ester with H2NNH2 H2O in EtOH. Heating 4-oxo-4//- and 6-methyl-4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic hydrazides in EtOH in the presence of excess Raney Ni afforded fhe appropriafe 4-oxo-6,7,8,9-fefrahydro-4//-pyrido[l,2-n]pyrimidine-3-acefa-mide. In the case of the 4-oxo-4// derivative, in addition to N-N bond... 

The respective amide was prepared from 7-substituted 5-oxo-2,3-dihydro-5//-pyrido[l,2,3-de]-l,4-benzoxazine-6-carboxylic acids via acid chlorides with different benzylamines (00M1P3). 6-Carboxamides were N-benzylated, and a side-chain phenolic hydroxy group was O-alkylated. 7-Aryl-5-oxo-2,3-dihydro-5//-pyrido[l, 2,3-r/e]-1,4-benzoxazine-6-carboxylic acid was obtained from the ethyl ester by alkalic hydrolysis. 

A side chain carboxyl group in perhydropyrido[l,2-a]pyrazines was obtained from an ester group by acidic or alkalic hydrolysis. A side chain carboxyl group was converted into a carboxamide group by the treatment with an amine in the presence of 1-hydroxybenzotriazole (OOJAP(K)OO/ 86659). 

Phenyl(3-a -"ethylpropionate ), 4-carboxamide] -tetrazanetll. Note a-ethylpropionate (or more correctly, in the opinion of the editor, a-ethylpropionatyl) is the proper name for the radical —CH(CH3).CCfe-C2H5, derived from a-propionic acid ethyl ester. (C6H5).N N.N[CH(CH3).C02.C2H5].NH(C0.NH2), mw 279.34, N 25.08%, crysts from aq ale, mp (melts with expln ca 125°)... 

An intramolecular ring expansion of aziridine esters can be accomplished by installing an appropriate nucleophilic entity in these substrates. Conversion of the ester moiety into carboxamides derived from aminomalonate ester gives compounds 44 containing the requisite nucleophilic site in the malonate moiety (Scheme 35). 

Partly saturated pyrazino[l,2-r-]pyrimidines were prepared by formation of the pyrazine ring. 2-Substituted-8-hydroxy-3,4-dihydro-177,277-pyrazino[l,2-r-]pyrimidin-l-ones were prepared by a [6+0] synthesis involving cyclization of 6-hydroxy-pyrimidine-4-(fV-hydroxyethyl)carboxamides <2005W02005/087766>. The 2/7-pyra-zino[l,2-c]pyrimidine-3-carboxamide 164 (Y = NH) was formed from [5+1] atom fragments via the uracil derivative 163 (Y = NH) and DMF-dimethyl acetal. Compounds 163 were prepared from 6-chloromethyluracil and glycine methyl ester 162 (Y = NH) (Scheme 20) <2004W02004/014354>. 

Doyle s rhodium(n) carboxamidate complexes are undisputedly the best catalysts for enantioselective cyclizations of acceptor-substituted carbenoids derived from diazo esters and diazoacetamides, displaying outstanding regio- and stereocontrol.4 These carboxamidate catalysts consist of four classes of complexes pyrrolidinones... 

FIGURE 5.16 Production of amides by cleavage of benzhydryl amides. Recognition that removal by acidolysis of benzhydryl protectors from carboxamides gave the amides (B) led to development of benzhydrylamine (BHA) resin (C).33 Treatment with HF of a peptide amide that has been assembled on a BHA resin using Boc/Bzl chemistry gives the peptide amide (D). Peptide amide is also obtainable by ammonolysis of the resin-bound benzyl ester (A), a reaction that is more efficient if gaseous NH3 is employed (see Section 8.3). 

---