Carbonyl compounds acetalization

Alcohols carbonyl compounds acetate buffer, room temperature 169... 

Addition of Heteroatom Nucleophiles to Carbonyl Compounds Acetalizations... 

Allylation. The reaction of allylsilanes with carbonyl compounds, acetals, and ortho esters is catalyzed by Cp2Ti(OTf)2. Rapid reaction rates and good conversion... 

Suspend 0 25 g. of 2 4-dinitrophenylhydrazine in 5 ml. of methanol and add 0-4 0-5 ml. of concentrated sulphuric acid cautiously. FUter the warm solution and add a solution of 0 1-0-2 g. of the carbonyl compound in a small volume of methanol or of ether. If no sohd separate within 10 minutes, dUute the solution carefuUy with 2N sulphuric acid. CoUect the solid by suction filtration and wash it with a little methanol. RecrystaUise the derivative from alcohol, dUute alcohol, alcohol with ethyl acetate or chloroform or acetone, acetic acid, dioxan, nitromethane, nitrobenzene or xylene. 

This preparation illustrates the Reformatsky reaction, which consists in the interaction of a carbonyl compound, an a-halogen ester (e.g., ethyl bromo-acetate) and zinc In the presence of ether or benzene, followed by hydrolysis. 

Analysis the functional group is an acetal derived fiom alcohols and a carbonyl compound. 

Thallium(III) acetate reacts with alkenes to give 1,2-diol derivatives (see p. 128) while thallium(III) nitrate leads mostly to rearranged carbonyl compounds via organothallium compounds (E.C. Taylor, 1970, 1976 R.J. Ouelette, 1973 W. Rotermund, 1975 R. Criegee, 1979). Very useful reactions in complex syntheses have been those with olefins and ketones (see p. 136) containing conjugated aromatic substituents, e.g. porphyrins (G. W. Kenner, 1973 K.M. Smith, 1975). 

The most commonly used protected derivatives of aldehydes and ketones are 1,3-dioxolanes and 1,3-oxathiolanes. They are obtained from the carbonyl compounds and 1,2-ethanediol or 2-mercaptoethanol, respectively, in aprotic solvents and in the presence of catalysts, e.g. BF, (L.F. Fieser, 1954 G.E. Wilson, Jr., 1968), and water scavengers, e.g. orthoesters (P. Doyle. 1965). Acid-catalyzed exchange dioxolanation with dioxolanes of low boiling ketones, e.g. acetone, which are distilled during the reaction, can also be applied (H. J. Dauben, Jr., 1954). Selective monoketalization of diketones is often used with good success (C. Mercier, 1973). Even from diketones with two keto groups of very similar reactivity monoketals may be obtained by repeated acid-catalyzed equilibration (W.S. Johnson, 1962 A.G. Hortmann, 1969). Most aldehydes are easily converted into acetals. The ketalization of ketones is more difficult for sterical reasons and often requires long reaction times at elevated temperatures. a, -Unsaturated ketones react more slowly than saturated ketones. 2-Mercaptoethanol is more reactive than 1,2-ethanediol (J. Romo, 1951 C. Djerassi, 1952 G.E. Wilson, Jr., 1968). 

Some organosilicon compounds undergo transmetallation. The allylic cyanide 461 was prepared by the reaction of an allylic carbonate with trimethylsi-lyl cyanide[298]. The oriho esters and acetals of the o. d-unsaturated carbonyl compounds 462 undergo cyanation with trimefhylsilyl cyanide[95]. 

Preparation of o,/3-Unsaturated Carbonyl Compounds by the Reactions of Silyl Enol Ethers and Enol Acetates with Ally Carbonates... 

The g-methylene group of butyrolactone condenses easily with a number of different types of carbonyl compounds eg, sodium alkoxides cataly2e self-condensation to a-dibutyrolactone (155), ben2aldehyde gives a-ben2yhdenebutyrolactone (156), and ethyl acetate gives a-acetobutyrolactone (157). 

Alkaline solutions of mononitroparaffins undergo many different reactions when stored for long periods, acidified, or heated. Acidification of solutions of mononitro salts is best effected slowly at 0°C or lower with weak acids or buffered acidic mixtures, such as acetic acid—urea, carbon dioxide, or hydroxyl ammonium chloride. If mineral acids are used under mild conditions, eg, dilute HCl at 0°C, decomposition yields a carbonyl compound and nitrous oxide (Nef reaction). 

Cyclic Peroxides. CycHc diperoxides (4) and triperoxides (5) are soHds and the low molecular weight compounds are shock-sensitive and explosive (151). The melting points of some characteristic compounds of this type are given in Table 5. They can be reduced to carbonyl compounds and alcohols with zinc and alkaH, zinc and acetic acid, aluminum amalgam, Grignard reagents, and warm acidified iodides (44,122). They are more difficult to analyze by titration with acidified iodides than the acycHc peroxides and have been sucessfuUy analyzed by gas chromatography (112). 

Carbonyl Compounds. Cychc ketals and acetals (dioxolanes) are produced from reaction of propylene oxide with ketones and aldehydes, respectively. Suitable catalysts iaclude stannic chloride, quaternary ammonium salts, glycol sulphites, and molybdenum acetyl acetonate or naphthenate (89—91). Lactones come from Ph4Sbl-cataly2ed reaction with ketenes (92). 

The introduction of tritium into molecules is most commonly achieved by reductive methods, including catalytic reduction by tritium gas, PH2], of olefins, catalytic reductive replacement of halogen (Cl, Br, or I) by H2, and metal pH] hydride reduction of carbonyl compounds, eg, ketones (qv) and some esters, to tritium-labeled alcohols (5). The use of tritium-labeled building blocks, eg, pH] methyl iodide and pH]-acetic anhydride, is an alternative route to the preparation of high specific activity, tritium-labeled compounds. The use of these techniques for the synthesis of radiolabeled receptor ligands, ie, dmgs and dmg analogues, has been described ia detail ia the Hterature (6,7). 

By a suitable choice of activating reagents, primary and secondary alcohols can be selectively oxidi2ed to carbonyl compounds in good yields at room temperatures. Typical activating reagents are acetic anhydride, sulfur trioxide—pyridine, dicyclohexyl carbodiimide, and phosphoms pentoxide (40). 

Manufacture. Trichloromethanesulfenyl chloride is made commercially by chlorination of carbon disulfide with the careful exclusion of iron or other metals, which cataly2e the chlorinolysis of the C—S bond to produce carbon tetrachloride. Various catalysts, notably iodine and activated carbon, are effective. The product is purified by fractional distillation to a minimum purity of 95%. Continuous processes have been described wherein carbon disulfide chlorination takes place on a granular charcoal column (59,60). A series of patents describes means for yield improvement by chlorination in the presence of dihinctional carbonyl compounds, phosphonates, phosphonites, phosphites, phosphates, or lead acetate (61). 

A carbonyl group can be protected as a sulfur derivative—for example, a dithio acetal or ketal, 1,3-dithiane, or 1,3-dithiolane—by reaction of the carbonyl compound in the presence of an acid catalyst with a thiol or dithiol. The derivatives are in general cleaved by reaction with Hg(II) salts or oxidation acidic hydrolysis is unsatisfactory. The acyclic derivatives are formed and hydrolyzed much more readily than their cyclic counterparts. Representative examples of formation and cleavage are shown below. 

Acyclic monothio acetals and ketals can be prepared directly from a carbonyl compound or by transketalization, a reaction that does not involve a free carbonyl group, from a 1,3-dithiane or 1,3-dithiolane. They are cleaved by acidic hydrolysis or Hg(II) salts. 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

The equilibrium constants for addition of alcohols to carbonyl compounds to give hemiacetals or hemiketals show the same response to structural features as the hydration reaction. Equilibrium constants for addition of metiianoHb acetaldehyde in both water and chloroform solution are near 0.8 A/ . The comparable value for addition of water is about 0.02 The overall equilibrium constant for formation of the dimethyl acetal of... 

Three-dimensional potential energy diagrams of the type discussed in connection with the variable E2 transition state theory for elimination reactions can be used to consider structural effects on the reactivity of carbonyl compounds and the tetrahedral intermediates involved in carbonyl-group reactions. Many of these reactions involve the formation or breaking of two separate bonds. This is the case in the first stage of acetal hydrolysis, which involves both a proton transfer and breaking of a C—O bond. The overall reaction might take place in several ways. There are two mechanistic extremes ... 

---