Capillary zone electrophoresis sample

Capillary Zone Electrophoresis The simplest form of capillary electrophoresis is capillary zone electrophoresis (CZE). In CZE the capillary tube is filled with a buffer solution and, after loading the sample, the ends of the capillary tube are placed in reservoirs containing additional buffer solution. Under normal conditions, the end of the capillary containing the sample is the anode, and solutes migrate toward... 

The last set of experiments provides examples of the application of capillary electrophoresis. These experiments encompass a variety of different types of samples and include examples of capillary zone electrophoresis and micellar electrokinetic chromatography. 

Biomolecule Separations. Advances in chemical separation techniques such as capillary zone electrophoresis (cze) and sedimentation field flow fractionation (sfff) allow for the isolation of nanogram quantities of amino acids and proteins, as weU as the characterization of large biomolecules (63—68) (see Biopolymers, analytical techniques). The two aforementioned techniques, as weU as chromatography and centrifugation, ate all based upon the differential migration of materials. Trends in the area of separations are toward the manipulation of smaller sample volumes, more rapid purification and analysis of materials, higher resolution of complex mixtures, milder conditions, and higher recovery (69). 

Very recently, HPLC with fluorescence detection was recommended for improving detection sensitivities of betalains. " While this technique may be worthwhile for betaxanthin analyses, its use for betacyanins cannot be recommended. Although this technique represents a worthwhile approach requiring low amounts of solvent and sample and generally characterized by a high separation efhciency, only one study dealt with the use of capillary zone electrophoresis for betalain analyses. ... 

Klampfl, C. W., Buchberger, W., and Haddad, P. R. (2000). Determination of organic acids in food samples by capillary zone electrophoresis. J. Chromatogr. A 881, 357-364. 

Table 1 summarizes several of the experimental methods discussed in this chapter. A need exists for new or revised methods for transport experimentation, particularly for therapeutic proteins or peptides in polymeric systems. An important criterion for the new or revised methods includes in situ sampling using micro techniques which simultaneously sample, separate, and analyze the sample. For example, capillary zone electrophoresis provides a micro technique with high separation resolution and the potential to measure the mobilities and diffusion coefficients of the diffusant in the presence of a polymer. Combining the separation and analytical components adds considerable power and versatility to the method. In addition, up-to-date separation instrumentation is computer-driven, so that methods development is optimized, data are acquired according to a predetermined program, and data analysis is facilitated. 

Monnig, C.A., Jorgenson, J.W. (1991a). On-column sample gating for high-speed capillary zone electrophoresis. Anal. Chem. 63, 802-807. 

Capillary zone electrophoresis coupled with fast cyclic voltammetric detection was developed by Zhou et al. [27] for the separation and determination of OTC, TC, and CTC antibiotics. All compounds were well separated by optimization of pH and complexation with a boric acid sodium tetraborate buffer. The detection limit using fast on-line cyclic voltammetric detection with Hg-film-microm electrode was 1.5 x 10-6 mol/L for OTC (signal to noise ratio > 2). A continuous flow manifold coupled on-line to a capillary electrophoresis system was developed by Nozal et al. [28] for determining the trace levels of OTC, TC, and DC in surface water samples. 

Fan et al. [106] developed a high performance capillary electrophoresis method for the analysis of primaquine and its trifluoroacetyl derivative. The method is based on the mode of capillary-zone electrophoresis in the Bio-Rad HPE-100 capillary electrophoresis system effects of some factors in the electrophoretic conditions on the separation of primaquine and trifluoroacetyl primaquine were studied. Methyl ephedrine was used as the internal standard and the detection was carried out at 210 nm. A linear relationship was obtained between the ratio of peak area of sample and internal standard and corresponding concentration of sample. The relative standard deviations of migration time and the ratio of peak area of within-day and between-day for replicate injections were <0.6% and 5.0%, respectively. 

We therefore sought to evaluate reproducibility of shotgun proteomics in studies of archival FFPE tissue. Because FFPE samples are more complex than non-cross-linked samples, we evaluated FFPE human liver for analytical reproducibility and confidence in protein assignments.20 This complexity strengthens the argument for using high-resolution separations to maximize analyte concentration and minimize matrix effects. In this case, we used transient capillary isotachophoresis/capillary zone electrophoresis (cITP/cZE) in place of IEF to help address this effect. cITP/cZE has a resolution superior even to cIEF (90% of identified peptides in 1 fraction, 95% in 2 fractions or less for cITP/cZE, vs. 75% and 80%, respectively, for cIEF). 

QUIRINO, J.P., TERABE, S., Sample stacking of fast-moving anions in capillary zone electrophoresis, J. Chromatogr., A., 1999, 850, 339-344. 

M. Perez-Urquiza, R. Ferrer and J.L. Beltran, Determination of sulfonated azo dyes in river samples by capillary zone electrophoresis. J. Chromatogr.A, 883 (2000) 277-283. 

In CZE, the capillary, inlet reservoir, and outlet reservoir are filled with the same electrolyte solution. This solution is variously termed background electrolyte, analysis buffer, or run buffer. In CZE, the sample is injected at the inlet end of the capillary, and components migrate toward the detection point according to their mass-to-charge ratio by the electrophoretic mobility and separations principles outlined in the preceding text. It is the simplest form of CE and the most widely used, particularly for protein separations. CZE is described in Capillary Zone Electrophoresis. ... 

FIGURE I I Capillary zone electrophoresis of forced degraded rMAb sample. Experimental conditions as in Figure 9. 

Chen, Y. R., Tseng, M. C., Chang, Y. Z., and Her, G. R. (2003). A low-flow CE/electrospray ionization MS interface for capillary zone electrophoresis, large-volume sample stacking, and micellar electroklnetlc chromatography. Anal. Chem. 75, 503 — 508. 

Hoyt and Sepaniak have used capillary zone electrophoresis to determine procaine in pharmaceuticals as a cation of benzylpenicillin [148]. A benzylpenicillin potassium tablet (250 mg) was treated with 20 mL of a 0.2% phenol solution (the internal standard), and dispersed in water. The solution was diluted to 500 mL, and samples were introduced into the fused silica capillary tube (70 cm x 50 gm) by siphoning. With 10 mM Na2HP04-6mM Na2B407 buffer as the mobile phase, the samples were subjected to electrophoresis at 30 kV (25 to 30 pA), and the emerging analytes detected at 228 nm within 10 minutes. 

---