Calorimetry solvents

Solution calorimetry covers the measurement of the energy changes that occur when a compound or a mixture (solid, liquid or gas) is mixed, dissolved or adsorbed in a solvent or a solution. In addition it includes the measurement of the heat capacity of the resultant solution. Solution calorimeters are usually subdivided by the method in which the components are mixed, namely, batch, titration and flow. 

Solution Polymers. Acryflc solution polymers are usually characterized by their composition, solids content, viscosity, molecular weight, glass-transition temperature, and solvent. The compositions of acryflc polymers are most readily determined by physicochemical methods such as spectroscopy, pyrolytic gas—liquid chromatography, and refractive index measurements (97,158). The solids content of acryflc polymers is determined by dilution followed by solvent evaporation to constant weight. Viscosities are most conveniently determined with a Brookfield viscometer, molecular weight by intrinsic viscosity (158), and glass-transition temperature by calorimetry. 

What are the consequences What is the maximum pressure Vapor pressure of solvent as a function of temperature Gas evolution Differential Thermal Analysis (DTA) / Differential Scanning Calorimetry (DSC) Dewar flask experiments... 

VDW terms (C , Pure solvent properties [56] Vapor pressure, calorimetry,... 

Common examples of the high Tg macromers are based on polystyrene or polymethylmethacrylate (PMMA) polymers of sufficiently high molecular weight to have a high T (typically on the order of 70-100°C as measured by differential scanning calorimetry) and also to make them immiscible with the acrylic polymer backbone once the solvent or heat has been removed. Typical molecular weight of the polystyrene or PMMA macromers is on the order of 5000-10,000 Da. Their generic structure can be pictured as in Fig. 13 (shown there for polystyrene). 

More recently, Scaiano et al. (1991) observed (Zs)->(Z)-isomerization of 1,3-di-phenyltriazene also in methanol by using flash photolysis, transient spectroscopy, and laser-induced optoacoustic calorimetry (LIOAC). The interpretation of the data is consistent with the mechanism shown in Scheme 13-4, involving two solvent molecules. 

Given the zwitterionic natnre of single carbenes, the possibility exists for coordinating solvents such as ethers or aromatic compounds to associate weakly with the empty p-orbital of the carbene. Several experimental stndies have revealed dramatic effects of dioxane or aromatic solvents on prodnct distribntions of carbene reactions. Computational evidence has also been reported for carbene-benzene complexes. Indeed, picosecond optical grating calorimetry stndies have indicated that singlet methylene and benzene form a weak complex with a dissociation energy of 8.7kcal/mol. ... 

Instrumentation. H and NMR spectra were recorded on a Bruker AV 400 spectrometer (400.2 MHz for proton and 100.6 MHz for carbon) at 310 K. Chemical shifts (< are expressed in ppm coupling constants (J) in Hz. Deuterated DMSO and/or water were used as solvent chemical shift values are reported relative to residual signals (DMSO 5 = 2.50 for H and 5 = 39.5 for C). ESl-MS data were obtained on a VG Trio-2000 Fisons Instruments Mass Spectrometer with VG MassLynx software. Vers. 2.00 in CH3CN/H2O at 60°C. Isothermal titration calorimetry (ITC) experiments were conducted on a VP isothermal titration calorimeter from Microcal at 30°C. 

Table II. Selective Solvent Extraction, Calculated Mc PDMAAm, and Differential Scanning Calorimetry Data...

Brittle colorless films of PBPP may be cast from tetrahydrofuran solution. The insoluble portion of PBPP is swelled by the tetrahydrofuran and gives rise to free-standing films on solvent evaporation. Differential scanning calorimetry experiments on PBPP show a glass transition temperature at 40 °C, and some indication of a melting transition at 170° C. 

Birefringence measurements have been shown to be very sensitive to bimodality, and have therefore also been used to characterize non-Gaussian effects resulting from it in PDMS bimodal elastomers [5,123]. The freezing points of solvents absorbed into bimodal networks are also of interest since solvent molecules constrained to small volumes form only relatively small crystallites upon crystallization, and therefore exhibit lower crystallization temperatures [124—126]. Some differential scanning calorimetry (DSC) measurements on... 

One of the most powerful techniques available for the evaluation of the solubility attributes of polymorphic or solvate species is solution calorimetry. Each distinct crystal phase is characterized by a well-defined heat of solution as it dissolves into a given solvent system, and the difference between the heats of solution of each phase in the same defined solvent system equals the heat of transition between them at the temperature of measurement. Solution calorimetry has been used to complement or to investigate a wide variety of crystal properties,... 

In some instances, distinct polymorphic forms can be isolated that do not interconvert when suspended in a solvent system, but that also do not exhibit differences in intrinsic dissolution rates. One such example is enalapril maleate, which exists in two bioequivalent polymorphic forms of equal dissolution rate [139], and therefore of equal free energy. When solution calorimetry was used to study the system, it was found that the enthalpy difference between the two forms was very small. The difference in heats of solution of the two polymorphic forms obtained in methanol was found to be 0.51 kcal/mol, while the analogous difference obtained in acetone was 0.69 kcal/mol. These results obtained in two different solvent systems are probably equal to within experimental error. It may be concluded that the small difference in lattice enthalpies (AH) between the two forms is compensated by an almost equal and opposite small difference in the entropy term (-T AS), so that the difference in free energy (AG) is not sufficient to lead to observable differences in either dissolution rate or equilibrium solubility. The bioequivalence of the two polymorphs of enalapril maleate is therefore easily explained thermodynamically. 

The basic principle of solution calorimetry is simple. In one experiment the enthalpy of solution of, for example, LaA103(s) [32] is measured in a particular solvent. In order to convert this enthalpy of solution to an enthalpy of formation, a thermodynamic cycle, which gives the formation reaction... 

The solution experiments may be made in aqueous media at around ambient temperatures, or in metallic or inorganic melts at high temperatures. Two main types of ambient temperature solution calorimeter are used adiabatic and isoperibol. While the adiabatic ones tend to be more accurate, they are quite complex instruments. Thus most solution calorimeters are of the isoperibol type [33]. The choice of solvent is obviously crucial and aqueous hydrofluoric acid or mixtures of HF and HC1 are often-used solvents in materials applications. Very precise enthalpies of solution, with uncertainties approaching 0.1% are obtained. The effect of dilution and of changes in solvent composition must be considered. Whereas low temperature solution calorimetry is well suited for hydrous phases, its ability to handle refractory oxides like A1203 and MgO is limited. 

Low melting metals (Sn and also Bi, In, Pb, and Cd) are extensively used as solvents in calorimetric studies of metallic phases [35]. Transition metals do not, however, dissolve readily in tin [43] and other solvents such as Cu and A1 have been used. An experimental probe for high-temperature solution calorimetry is shown in Figure 10.8. 

In solute-solvent calorimetry the compound to be studied is present as a mixture with another element or compound in solid form at room temperature and dropped into a hot calorimeter with resulting formation of a liquid product [35], In order to determine the enthalpy of formation of LaBg, Pt was added in a proportion that gave the composition of a low melting eutectic. The liquid phase formed enhanced the reaction rate and enabled the energetic parameters to be extracted [46],... 

Apart from the qualitative observations made previously about suitable solvents for study, the subject of solvates has two important bearings on the topics of thermochemistry which form the main body of this review. The first is that measured solubilities relate to the appropriate hydrate in equilibrium with the saturated solution, rather than to the anhydrous halide. Obviously, therefore, any estimate of enthalpy of solution from temperature dependence of solubility will refer to the appropriate solvate. The second area of relevance is to halide-solvent bonding strengths. These may be gauged to some extent from differential thermal analysis (DTA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) solvates of "aprotic solvents such as pyridine, tetrahydrofuran, and acetonitrile will give clearer pictures here than solvates of "protic solvents such as water or alcohols. 

To illustrate an application of PAC, we chose reaction 13.22, which has been suggested as a test reaction for photoacoustic calorimetry, that is, as a procedure to assess the reliability of the instrument [285]. Wayner et al. [293] made a very careful PAC study of this reaction in several solvents. 

---