C activation reactions

An example of a reaction sequence involving both C—H and (3-C—C activation reactions is the stepwise transformation of a neopentyl into a trimeth-ylenemethyl ligand in (SiP3)Ru complexes [SiP3 = MeSi(CH2PMe2)3] 119... 

Of all the heterocycles featured in nature and in man-made compounds, indole is the most abundant This electron-rich heteroaromatic compound reacts with a range of electrophiles, predominantly at the C3 position via an electrophilic aromatic substi-tntion pathway. The C2 position of indole is the most reactive site for metalation however C—activation reactions can proceed at either the C2 or C3 positions therefore, the control of site-selectivity is the major challenge. 

Scheme 4.8 C-H and C-C activation reactions of [(IMes)RuH2(CO)(PPh3)2] 18.

Reductive elimination which produces C—C bonds is of considerable importance, representing the microscopic reverse for little known C—C activation reactions. [CpaMRj] complexes (M = Ti, Zr R = alkyl) have recently been shown to eliminate R2 upon one-electron oxidation. 

Formaldehyde may react with the active hydrogens on both the urea and amine groups and therefore the polymer is probably highly branched. The amount of formaldehyde (2—4 mol per 1 mol urea), the amount and kind of polyamine (10—15%), and resin concentration are variable and hundreds of patents have been issued throughout the world. Generally, the urea, formaldehyde, polyamine, and water react at 80—100°C. The reaction may be carried out in two steps with an initial methylolation at alkaline pH, followed by condensation to the desired degree at acidic pH, or the entire reaction may be carried out under acidic conditions (63). The product is generally a symp with 25—35% soHds and is stable for up to three months. 

Because the integrity of the dihydrothiazine ring and its C-4 carboxyl substituent is crucial to useful antimicrobial activity, reactions involving this part of the cephalosporin molecule are usually undesirable. The possibilities for sulfur oxidation or alkylation, substitution at C-2 which is adjacent to both sulfur and a double bond, double bond isomerization and addition reactions, and the influence of a free carboxylic acid must all be considered in designing reactions to selectively modify other cephalosporin functionalities. 

Pyrazolo[3,4-d][l,2]diazepines synthesis, 7, 597 Pyrazolop, 4- 6][ 1,4]diazepines synthesis, 5, 272 Pyrazolo[l, 4]diazepinones as anticonvulsant, 1, 170 Pyrazolo[2,3-e]diazepinones synthesis, 5, 272 1 H-Pyrazolo[l,5-6]imidazoles synthesis, 6, 992 Pyrazolo[2,3-a]imidazoles biological activity, 6, 1024 Pyrazolo[2,3-c]imidazoles reactions, 6, 1041 synthesis, 6, 1047 Pyrazolo[2,3-imidazoles synthesis, 6, 991 Pyrazolo[3,2- njisoquinolines synthesis, 5, 339 Pyrazolop, 4-c]isoquinolines synthesis, 5, 273 Pyrazolonaphthyri dines synthesis, 5, 339 Pyrazolone, diazophotolysis, 5, 252 Pyrazolone, 4,4-dihalo-rearrangements, 5, 250 Pyrazolone, ethoxy-hydrazinolysis, 5, 253 Pyrazolone, 4-halo-... 

The preferred catalyst is one which contains 5% of chromium oxides, mainly Cr03, on a finely divided silica-alumina catalyst (75-90% silica) which has been activated by heating to about 250°C. After reaction the mixture is passed to a gas-liquid separator where the ethylene is flashed off, catalyst is then removed from the liquid product of the separator and the polymer separated from the solvent by either flashing off the solvent or precipitating the polymer by cooling. 

The hydrofluonnation of alkenes also occurs in the gas phase, generally at somewhat higher temperatures [J]. Huoroethane is obtained m yields as high as 98% at 100 to 160 C by reaction in the presence of minor amounts of higher ot-olefms [6], and 2-fluoropropane is prepared in greater than 90% yield at <.80 "C from hydrogen fluonde and propene in the presence of activated carbon [7]... 

For the activation of a substrate such as 19a via coordination of the two carbonyl oxygen atoms to the metal, one should expect that a hard Lewis acid would be more suitable, since the carbonyl oxygens are hard Lewis bases. Nevertheless, Fu-rukawa et al. succeeded in applying the relative soft metal palladium as catalyst for the 1,3-dipolar cycloaddition reaction between 1 and 19a (Scheme 6.36) [79, 80]. They applied the dicationic Pd-BINAP 54 as the catalyst, and whereas this type of catalytic reactions is often carried out at rt or at 0°C, the reactions catalyzed by 54 required heating at 40 °C in order to proceed. In most cases mixtures of endo-21 and exo-21 were obtained, however, high enantioselectivity of up to 93% were obtained for reactions of some derivatives of 1. 

A 15.7 g (0.1 mol) of 2,6-dihydroxy methylpy rid in e hydrochloride are suspended in 176 ml of acetonitrile, and 20fi ml (0.15 mol) of triethylamine are added to the suspension. Thereafter 13 ml (0.22 mol) of methyl isocyanate are added dropwise to the reaction mixture at 20°C to 25°C. The reaction mixture is stirred at 20°C to 30°C for one hour, thereafter boiled for 3 hours, and finally the solvent is evaporated under reduced pressure. 35 to 40 g of a greyish, crystalline residue are obtained, which Is a mixture of 2,6-dihydroxymethylpyridine-bis-(N-methylcarbamate) and triethylamine hydrochloride. The obtained residue is dissolved in 80 ml of hot water, decolorized with 2 g of activated carbon when hot, and filtered after 30 minutes of stirring. The filtrate is cooled, the resulting crystal suspension is stirred at 0°C to 5°C for 3 hours, the solids are filtered off, and dried at 50°C to 60°C. 

Cationic phosphine ligands containing guanidiniumphenyl moieties were originally developed in order to make use of their pronounced solubility in water [72, 73]. They were shown to form active catalytic systems in Pd-mediated C-C coupling reactions between aryl iodides and alkynes (Castro-Stephens-Sonogashira reaction) [72, 74] and Rh-catalyzed hydroformylation of olefins in aqueous two-phase systems [75]. 

The cyclodimerization of 1,3-butadiene was carried out in [BMIM][BF4] and [BMIM][PF(3] with an in situ iron catalyst system. The catalyst was prepared by reduction of [Fe2(NO)4Cl2] with metallic zinc in the ionic liquid. At 50 °C, the reaction proceeded in [BMIM][BF4] to give full conversion of 1,3-butadiene, and 4-vinyl-cyclohexene was formed with 100 % selectivity. The observed catalytic activity corresponded to a turnover frequency of at least 1440 h (Scheme 5.2-24). 

The ease of formation of the carbene depends on the nucleophilicity of the anion associated with the imidazolium. For example, when Pd(OAc)2 is heated in the presence of [BMIM][Br], the formation of a mixture of Pd imidazolylidene complexes occurs. Palladium complexes have been shown to be active and stable catalysts for Heck and other C-C coupling reactions [34]. The highest activity and stability of palladium is observed in the ionic liquid [BMIM][Brj. Carbene complexes can be formed not only by deprotonation of the imidazolium cation but also by direct oxidative addition to metal(O) (Scheme 5.3-3). These heterocyclic carbene ligands can be functionalized with polar groups in order to increase their affinity for ionic liquids. While their donor properties can be compared to those of donor phosphines, they have the advantage over phosphines of being stable toward oxidation. 

Similarly, when both the Cp and arene ligands are permethylated, the reaction of 02 with the Fe1 complex leads to C-H activation of the more acidic benzyl bond [57]. When no benzylic hydrogen is present, superoxide reacts as a nucleophile and adds onto the benzene ligand of the FeCp(arene)+ cation to give a peroxocyclohexadienyl radical which couples with a Fe Cp(arene) radical. A symmetrical bridging peroxo complex [(Fe"Cp)2(r 5-C6H60)2] is obtained. The C-H activation reactions of the 19e Fe1 radicals BH can be summarized as follows... 

The synthesis of pyrido[2,3-d]pyrimidin-7(8H)-ones has also been achieved by a microwave-assisted MCR [87-89] that is based on the Victory reaction of 6-oxotetrahydropyridine-3-carbonitrile 57, obtained by reaction of an Q ,/3-unsaturated ester 56 and malonitrile 47 (Z = CN). The one-pot cyclo condensation of 56, amidines 58 and methylene active nitriles 47, either malonitrile or ethyl cyanoacetate, at 100 °C for benzamidine or 140 °C for reactions with guanidine, in methanol in the presence of a catalytic amount of sodium methoxide gave 4-oxo-60 or 4-aminopyridopyrimidines 59, respectively, in only 10 min in a single-mode microwave reactor [87,88]... 

Consecutive Reactions. The prototypical reaction is A B C, although reactions like Equation (6.2) can be treated in the same fashion. It may be that the first reaction is independent of the second. This is the normal case when the first reaction is irreversible and homogeneous (so that component B does not occupy an active site). A kinetic study can then measure the starting and final concentrations of component A (or of A and A2 as per Equation (6.2)), and these data can be used to fit the rate expression. The kinetics of the second reaction can be measured independently by reacting pure B. Thus, it may be possible to perform completely separate kinetic studies of the reactions in a consecutive sequence. The data are fit using two separate versions of Equation (7.8), one for each reaction. The data will be the experimental values of for one sum-of-squares and b ut for another. 

Stimulated by extensive research activities on donor/acceptor substituted stilbenes, Mullen and Klarner have reported a donor/acceptor substituted poly(4,4 -biphenyl-diylvinylene) derivative (85) in which the NR2 donor and CN acceptor substituents are located on the vinylene unit [111]. The synthesis is based on a C-C-coupling reaction of in situ generated carbanion functions with a (pseudo)cation function, followed by a subsequent elimination of MeSH with formation of the olefinic double bond. 

As with any reaction, temperature has an important effect on the rate of an errzy-matic reaction, albeit that the range of interest is limited. For each enzyme an optimum temperature exists (37 °C for reactions in human beings). At high temperatures the activity decreases due to thermal denaturation of the protein constituting the enzyme. 

---