Built Detergent Heavy Duty

SOURCE FMC Corp. Detergent Applications Bulletin No. 4 Suggested Formulations 

Water 34.1% TKPP 17.2% Potassium hydroxide (45%) 31.1% Starso sodium silicate 15.2% Phosphate ester 2.0% C9-C11 linear alcohol, 8 moles E0 0.4% 

STPP 50% C9-C10 linear alcohol, 12 moles E0 3% Sodium gluconate 2% Metso Pentabead 20 sodium metasilicate 45% 

SOURCE PQ Corp. Detergent Formulary Suggested Formulations 

Dissolve Sodium Citrate in Water by stirring at 45-50C, add Cal soft F-90. Mix Part B in the order listed. Add A to B . Add Sodium Formate and Calcium Chloride. Cool to room tempera-ature. Add the enzymes. Add colorant, perfume and water. Adjust pH to 10.0. 

---

Because of its superior solubility characteristics, a high 2-phenyl LAS (with an alkyl chain length average of 11.4) was the preferred type. The detergency performance of one LAS/AE type of formulation was discussed previously (see Figs. 12 and 13). Early commercial heavy-duty liquid (HDL) formulations were built with phosphate, but since 1979 almost all U.S. HDLs have been formulated without phosphate. 

Norfox Hercules Cone. [Norman, FOx] Built detergent blend for heavy duty cleaning, truck and auto washing, degreasing. 

Uses Nonfoaming surfactant, hydrotrope effective over wide range of electrolyte cones. couples nonionics into heavy-duty built alkaline cleaners controls cloud pt. in anionic/nonionic systems rec, for household and industrial detergents, e.g., bottle washing, high-pressure spray cleaners, alkaline degreasers, transportation cleaners, hard surf, cleaners stable in acid and alkaline systems Properties Gardner 3 cl. liq. sol, in 25% NaOH, 30% KOH, 20% HCI, 50% phosphoric acid pH 8.7 50% act. 

Uses Specialty foam booster/stabilizer, detergent, vise, builder tor shampoo, bubble baths, liq. dishwashing and general detergents emulsifier in heavy-duty built liqs. 

Uses Built detergent, wetting, dispersing agent for dairy, laundry, heavy-duty, hard surface detergents... 

---