Building materials stone

The design of adhesive mortars was based on binders of either hydrate lime-metakaolin or natural hydraulie lime, with the aim of formulating a complex system characterized by the highest compatibility. Nowadays, both hydrate lime-metakaolin and natural hydraulic lime mortars are widely used in the field of restoration and conservation of architectural monuments, due to their capability to enhance the chemical, physical, structural and mechanical compatibility with historical building materials (stones, bricks and mortars) (Rosario 2009). This compatibility is a very critical prerequisite for the optimum performance of conservation mortars, considering the damage caused to historic monuments dming the past decades, due to the extensive use of cement-based composites. 

Sulfur dioxide emissions may affect building stone and ferrous and nonferrous metals. Sulfurous acid, formed from the reaction of sulfur dioxide with moisture, accelerates the corrosion of iron, steel, and zinc. Sulfur oxides react with copper to produce the green patina of copper sulfate on the surface of the copper. Acids in the form of gases, aerosols, or precipitation may chemically erode building materials such as marble, limestone, and dolomite. Of particular concern is the chemical erosion of historical monuments and works of art. Sulfurous and sulfuric acids formed from sulfur dioxide and sulfur trioxide when they react with moisture may also damage paper and leather. 

Bauschung,/. swelling, etc. (see bauschen) protuberance bulge crease (in fabrics). Bau-stabl, m. structural steel, -stein, m. building stone brick (. ) unit, -stoff, m. building material, structural material (Physiol.) nutrient, -stoffwechsel, m. constructive metabolism, anabolism. 

Acid deposition and the associated particulate nitrates and sulfates are implicated in the deterioration of certain sensitive ecosystems, decreased visibility, negative human health effects, and increased degradation of certain stone building materials and cultural resources, especially those made of limestone and marble. Fine particulate nitrate and sulfate particles... 

The practice of corrosion inhibition requires that the inhibitive species should have easy access to the metal surface. Surfaces should therefore be clean and not contaminated by oil, grease, corrosion products, water hardness scales, etc. Furthermore, care should be taken to avoid the presence of deposited solid particles, e.g. stones, swarf, building materials, etc. This ideal state of affairs is often difficult to achieve but there are many cases where less than adequate consideration has been given to the preparation of systems to receive inhibitive treatment. Acid treatments, notably with 3-5% citric acid, with or without associated detergent washes, are often recommended and adopted for cleaning systems prior to inhibition. However, it is not always appreciated that these treatments will not remove particulate material particularly when, as is often the case, the material is insoluble in acids. 

Modem building materials have been developed to reduce the rates of environmental deterioration. However, stone, brick, and masonry constitute the stmcture of many of the historic buildings and statues that make up our cultural heritage. The reaction of sulphur-based solutions on the surfaces and... 

Carbonates Metal ion(s) + carbonate ion Calcite (calcium carbonate), used for making lime, a building material Marble (calcium carbonate), building and lapidary stone... 

Building materials and products carry environmental costs that you may not have considered. The information in the panels on the facing page will help you start to make more environmentally sound choices. Unfortunately, products rarely fulfill all the criteria that we would wish them to, so there will have to be compromise somewhere along the line. For example, although natural stone is a nonrenewable resource, it is very durable, and should last for many generations. Bamboo canes are a sustainable product, but may have traveled far. Aim to strike a balance. 

Natural stone, such as granite, sandstone, limestone, and slate, is a very limited resource but provides a very durable building material. Reconstituted stone products are made using stone dust from quarrying operations, bonded with cement or synthetic resins. Synthetic stone is made from minerals such as sand and ash bonded with synthetic resins. More energy is required to produce a reconstituted or synthetic product than to use stone in its natural state, and the production of the resins used can cause pollution. 

Some of the most dramatic environmental effects of acid deposition have involved buildings, statues, monuments, and other structures made of metal and stone. The explanation of this kind of damage is obvious Acids in acid deposition react with metals and with many of the compounds of which rock and other building material are made. For example, corrosion occurs when metals such as iron are exposed to hydrogen ions in the presence of oxygen ... 

The idea of reusing materials is hardly a new one. Archaeologists know that most civilizations have reused building materials over and over again. The bricks and stones used to build a temple, a... 

Masonry products have been widely used in the construction industry and include building materials such as cementious materials, concrete, brick, tile, stone, grout, and like substances. Driveways, garage flooring, concrete block, brick fronts, fireplaces, fireplace hearths, as well as tiled floor, wall and counter top surfaces are exemplary applications. Masonry surfaces are porous and if left unprotected can deteriorate from exposure to water and they can become discolored. For example, water penetration can cause spalling or lead to discoloration via microbial growth. Tiles and grouts employed in homes come in contact with various foods and liquids, e.g., fruit juice, coffee, oils, ketchup, mustard, etc. that can cause discoloration. 

Many things that are required to build a house rely on chemical reactions. Concrete, for example, is a mixture of cement, sand, and gravel or crushed stone. When water is added to this mixture, a chemical reaction called hydration takes place. During hydration, the compounds in the cement form chemical connections with the surrounding water molecules. Concrete is a popular building material because it is resistant to wind, water, rodents, and insects. It is also non-combustible, which means it will not catch fire. 

Early on, people learned how to combine natural materials in a variety of ways to make them more useful. They found that the combination of mud and straw (bricks) was a stronger and more permanent building material than either material by itself. And, thus, one of the first composite materials was born. The importance of societies ability to manipulate natural materials is evident in the fact that the earliest human civilizations have actually been named for the primary substances with which they worked stone, iron, copper, and bronze. 

R.L. Bates, Stone, Clay, Glasses How Building Materials Are Found and Used (Erslow, New York, 1987)... 

Compounds of the alkaline earth metals occur widely in nature, and some of them have been known since antiquity. Calcium carbonate, of which limestone is one form, has been used as a building material since the Stone Age and as a source of lime (CaO) for... 

Residential Commercial Building Materials Glass Fiber Reinforcements Manufactured Stone Veneer Products Glass Fiber Fabrics Construction Services... 

Corrosion. A more serious effect and one of great economic importance is the corrosive action of acid gases on building materials. Such acids can cause stone surfaces to blister and peel mortar can be reduced to powder. Metals are also damaged by the corrosive action of some pollutants. Another common effect is the deterioration of tires... 

---