Boronic hydration

Gole, J.L. and Pace, S.A., "Boron Hydration In the Vapor Phase", jJ. Phys. Chem., to be published. 

This is an exothermic process, due largely to the large hydration enthalpy of the proton. However, unlike the metallic elements, non-metallic elements do not usually form hydrated cations when their compounds dissolve in water the process of hydrolysis occurs instead. The reason is probably to be found in the difference in ionisation energies. Compare boron and aluminium in Group III ... 

Tin(ll) chloride Boron trifluoride, ethylene oxide, hydrazine hydrate, nitrates, Na, K, hydrogen peroxide... 

Aqueous mineral acids react with BF to yield the hydrates of BF or the hydroxyfluoroboric acids, fluoroboric acid, or boric acid. Solution in aqueous alkali gives the soluble salts of the hydroxyfluoroboric acids, fluoroboric acids, or boric acid. Boron trifluoride, slightly soluble in many organic solvents including saturated hydrocarbons (qv), halogenated hydrocarbons, and aromatic compounds, easily polymerizes unsaturated compounds such as butylenes (qv), styrene (qv), or vinyl esters, as well as easily cleaved cycHc molecules such as tetrahydrofuran (see Furan derivatives). Other molecules containing electron-donating atoms such as O, S, N, P, etc, eg, alcohols, acids, amines, phosphines, and ethers, may dissolve BF to produce soluble adducts. 

Boron trifluoride forms two hydrates, BF H2O and boron trifluoride dihydrate [13319-75-0], BF 2H20, (also BF D2O [33598-66-2] and BF3 -2D20 [33598-66-2]). According to reported nmr data (43,44), the dihydrate is ionic, H O F BOH" . The trihydrate has also been reported (45). 

The inactivity of pure anhydrous Lewis acid haUdes in Friedel-Crafts polymerisation of olefins was first demonstrated in 1936 (203) it was found that pure, dry aluminum chloride does not react with ethylene. Subsequentiy it was shown (204) that boron ttifluoride alone does not catalyse the polymerisation of isobutylene when kept absolutely dry in a vacuum system. However, polymers form upon admission of traces of water. The active catalyst is boron ttifluoride hydrate, BF H20, ie, a conjugate protic acid H" (BF20H) . 

Group 13 (IIIA) Perchlorates. Perchlorate compounds of boron and aluminum are known. Boron perchlorates occur as double salts with alkah metal perchlorates, eg, cesium boron tetraperchlorate [33152-95-3] Cs(B(C104)4) (51). Aluminum perchlorate [14452-95-3] A1(C104)2, forms a series of hydrates having 3, 6, 9, or 15 moles of water per mole of compound. The anhydrous salt is prepared from the trihydrate by drying under reduced pressure at 145—155°C over P2O5 (32). 

The oxides and oxyacids of boron as well as a variety of hydrated and anhydrous metal borates are discussed hereia. An alphabetical Hst of compounds referred to ia the text is given ia Table 1. 

The monothioacetal is also stable to 12 N hydrochloric acid in acetone (used to remove an TV-triphenylmethyl group) and to hydrazine hydrate in refluxing ethanol (used to cleave an A -phthaloyl group). It is cleaved by boron trifluoride etherate in acetic acid, silver nitrate in ethanol, and tiifluoroacetic acid. The monothioacetal is oxidized to a disulfide by thiocyanogen, (SCN)2- ... 

The hydrated insular groups may polymerize in various ways by splitting out water this process may be accompanied by the breaking of boron-oxygen bonds within the polyanion framework. 

Besides acetophenone, this reaction was also applied to p-chloro- andp-methoxyacetophenone, and even to an aliphatic ketone, acetone (although the yield was stated to be only half as large as that obtained from mesityl oxide, i.e., less than 30%, Dorofeenko and co-workers reported a 45% yield of 2,4,6-trimethylpyrylium perchlorate from acetone, acetic anhydride, and perchloric acid), and is the standard method for preparing pyrylium salts with identical substituents in positions 2 and 4. The acylating agent may be an anhydride in the presence of anhydrous or hydrated ferric chloride, or of boron fluoride, or the acid chloride with ferric chloride.Schneider and co-workers ... 

Acetylcyclohexanone. Method A. Place a mixture of 24-6 g. of cyclohexanone (regenerated from the bisulphite compound) and 61 g. (47 5 ml.) of A.R. acetic anhydride in a 500 ml. three-necked flask, fitted with an efficient sealed stirrer, a gas inlet tube reaching to within 1-2 cm. of the surface of the liquid combined with a thermometer immersed in the liquid (compare Fig. II, 7, 12, 6), and (in the third neck) a gas outlet tube leading to an alkali or water trap (Fig. II, 8, 1). Immerse the flask in a bath of Dry Ice - acetone, stir the mixture vigorously and pass commercial boron trifluoride (via an empty wash bottle and then through 95 per cent, sulphuric acid) as fast as possible (10-20 minutes) until the mixture, kept at 0-10°, is saturated (copious evolution of white fumes when the outlet tube is disconnected from the trap). Replace the Dry Ice-acetone bath by an ice bath and pass the gas in at a slower rate to ensure maximum absorption. Stir for 3 6 hours whilst allowing the ice bath to attain room temperature slowly. Pour the reaction mixture into a solution of 136 g. of hydrated sodium acetate in 250 ml. of water, reflux for 60 minutes (or until the boron fluoride complexes are hydrolysed), cool in ice and extract with three 50 ml. portions of petroleum ether, b.p. 40-60° (1), wash the combined extracts free of acid with sodium bicarbonate solution, dry over anhydrous calcium sulphate, remove the solvent by... 

Flame resistance A1203, antimony oxides, boron compounds, halogen compounds, phosphate esters, metal hydrates, magnesium compounds, tin compounds, molybdenum compounds, silicones Al, B, Br, Cl, Mo, P, Sb, Si, Sn, Zn... 

Si. rra(pentafluorophenyl)boron was found to be an efficient, air-stable, and water-tolerant Lewis-acid catalyst for the allylation reaction of allylsilanes with aldehydes.167 Sc(OTf)3-catalyzed allylations of hydrates of a-keto aldehydes, glyoxylates and activated aromatic aldehydes with allyltrimethylsilane in H2O-CH3CN were examined. a-Keto and a-ester homoallylic alcohols and aromatic homoallylic alcohols were obtained in good to excellent yields.168 Allylation reactions of carbonyl compounds such as aldehydes and reactive ketones using allyltrimethoxysilane in aqueous media proceeded smoothly in the presence of 5 mol% of a CdF2-terpyridine complex (Eq. 8.71).169... 

Partial reduction of polyarenes has been reported. Use of boron trifluoride hydrate (BF3 OH2) as the acid in conjunction with triethylsilane causes the reduction of certain activated aromatic systems 217,262 Thus, treatment of anthracene with a 4-6 molar excess of BE3 OH2 and a 30% molar excess of triethylsilane gives 9,10-dihydroanthracene in 89% yield after 1 hour at room temperature (Eq. 120). Naphthacene gives the analogously reduced product in 88% yield under the same conditions. These conditions also result in the formation of tetralin from 1-hydroxynaphthalene (52%, 4 hours), 2-hydroxy naphthalene (37%, 7 hours), 1-methoxynaphthalene (37%, 10 hours), 2-methoxynaphthalene (26%, 10 hours), and 1-naphthalenethiol (13%, 6 hours). Naphthalene, phenanthrene, 1-methylnaphthalene, 2-naphthalenethiol, phenol, anisole, toluene, and benzene all resist reduction under these conditions.217 Use of deuterated triethylsilane to reduce 1-methoxynaphthalene gives tetralin-l,l,3-yielding information on the mechanism of these reductions.262 2-Mercaptonaphthalenes are reduced to 2,3,4,5-tetrahydronaphthalenes in poor to modest yields.217 263... 

Hydroboration, the addition of a boron-hydrogen bond across an unsaturated moiety, was first discovered by H. C. Brown in 1956. Usually, the reaction does not require a catalyst, and the borane reagent, most commonly diborane (B2H6) or a borane adduct (BH3-THF), reacts rapidly at room temperature to afford, after oxidation, the /AMarkovnikov alkene hydration product. However, when the boron of the hydroborating agent is bonded to heteroatoms which lower the electron deficiency, as is the case in catecholborane (1,3,2-benzodioxaborole) 1 (Scheme 1), elevated temperatures are needed for hydroboration to occur.4 5... 

Under the catalysis of mercuric oxide and boron trifluoride-diethyl ether, the reaction of methanol with 1,2-hexadiene afforded 2,2-dimethoxyhexane [6]. Hydration with sulfuric acid led to methyl n-butyl ketone [6],... 

---