Boron trifluoride oxidation

Tin(ll) chloride Boron trifluoride, ethylene oxide, hydrazine hydrate, nitrates, Na, K, hydrogen peroxide... 

Chemical Properties. In addition to the reactions Hsted in Table 3, boron trifluoride reacts with alkali or alkaline-earth metal oxides, as well as other inorganic alkaline materials, at 450°C to yield the trimer trifluoroboroxine [13703-95-2] (BOF), MBF, and MF (29) where M is a univalent metal ion. The trimer is stable below — 135°C but disproportionates to B2O2 and BF at higher temperatures (30). 

AHylestrenol (37) is prepared from (32), an intermediate in the synthesis of norethindrone. Treatment of (32) with ethanedithiol and catalytic boron trifluoride provides a thioketal. Reduction with sodium in Hquid ammonia results in the desired reductive elimination of the thioketal along with reduction of the 17-keto group. Oxidation of this alcohol with chromic acid in acetone followed by addition of aHyl magnesium bromide, completes the synthesis... 

Other THF polymerization processes that have been disclosed in papers and patents, but which do not appear to be in commercial use in the 1990s, include catalysis by boron trifluoride complexes in combination with other cocatalysts (241—245), modified montmorrillonite clay (246—248) or modified metal oxide composites (249), rare-earth catalysts (250), triflate salts (164), and sulfuric acid or Aiming sulfuric acid with cocatalysts (237,251—255). 

Other catalysts that can be used are boron trifluoride (5), copper—chromium oxides (6), phosphoric acid (7), and siUca-alurnina (8). Under similar conditions, ethanol yields /V-ethylaniline [103-69-5] and /V,/V-diethylaniline [91-66-7] (9,10). 

Preparation. Hexagonal boron nitride can be prepared by heating boric oxide with ammonia, or by heating boric oxide, boric acid, or its salts with ammonium chloride, alkaU cyanides, or calcium cyanamide at atmospheric pressure. Elemental nitrogen does not react with boric oxide even in the presence of carbon, though it does react with elemental boron at high temperatures. Boron nitride obtained from the reaction of boron trichloride or boron trifluoride with ammonia is easily purified. 

The monothioacetal is also stable to 12 N hydrochloric acid in acetone (used to remove an TV-triphenylmethyl group) and to hydrazine hydrate in refluxing ethanol (used to cleave an A -phthaloyl group). It is cleaved by boron trifluoride etherate in acetic acid, silver nitrate in ethanol, and tiifluoroacetic acid. The monothioacetal is oxidized to a disulfide by thiocyanogen, (SCN)2- ... 

Biphenyl Bismuth telluride Boron oxide Boron trifluoride Bromine... 

The following procedure is given in U.S. Patent 3,458,528 78 grams (0.675 mol) of 5-nitroimidazole is dissolved in 1,500 ml of acetic acid upon the addition of 72 ml (0.57 mol) of boron trifluoride etherate. 175 ml (3.5 mols) of ethylene oxide in 175 ml of hexane, in a dropping funnel topped with a cold finger, is added slowly over 1 hour to the above solution maintained at 32° to 35°C with a water cooling bath. The mixture is concentrated under high vacuum to 100 to 150 ml volume. The residue is diluted with 500 ml of water, neutralized to pH 7 with aqueous sodium hydroxide, and extracted with 1.5 liters of ethyl acetate. The extract is dried and evaporated to yield 1-(2 -hydroxyethyl)-5-nitroimidazole. 

Mesitaldehyde may be prepared from mesitylmagnesium bromide by the reaction with orthoformate esters3 or ethoxy-methyleneaniline 3 from acetylmesitylene by oxidation with potassium permanganate,4 from mesitoyl chloride by reduction,5 from mesityllithium by the reaction with iron pentacarbonyl and from mesitylene by treatment with formyl fluoride and boron trifluoride,7 by treatment with carbon monoxide, hydrogen chloride, and aluminum chloride,8 or by various applications of the Gatterman synthesis.9-11... 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

The dehydrogenation of 2,3-dihydro- and 2,5-dihydro-l//-l-benzazepines to 3//-l-benz-azepincs with heterocyclic enamines in the presence of boron trifluoride diethyl ether complex has been achieved in moderate yields (30-35%).241 In contrast, electrochemical oxidation of 2,5-dihydro-1 H- -benzazepines in buffered acetic acid solution furnishes initially 5//-l-benz-azepines in 35-45% yield.242... 

H.12 The reaction of boron trifluoride, BF,(g), with sodium borohydride, NaBH4(s), leads to the formation of sodium tetrafluoroborate, NaBF4(s), and diborane gas, B2Hfc(g). The diborane reacts with the oxygen in air, forming boron oxide, B20 j(s), and water. Write the two balanced equations leading to the formation of boron oxide. 

The boron halides are made either by direct reaction of the elements at a high temperature or from boron oxide. The most important is boron trifluoride, BF, an industrial catalyst produced by the reaction between boron oxide, calcium fluoride, and sulfuric acid ... 

Oxidation of chalcones with TTN has been studied in detail (95, 96), and it has been shown that the products obtained depend on the amount of reagent and the solvent employed. Oxidation with 1 equivalent of TTN in methanol, methanol-chloroform, or methanol-boron trifluoride leads to acetals of the type (XXXIV) (see also Scheme 21) in yields of 20-80%. When 3 equivalents of TTN are employed, however, and aqueous glyme containing a little perchloric acid used as solvent, the products are benzils. This remarkable transformation, which proceeds in yields varying from moderate to good (40-80%), involves three distinct oxidations by TTN, and these are outlined in Scheme 22. Each individual step in this reaction sequence has been investigated in detail, with the result that useful procedures have been developed for the oxidation of both deoxybenzoins and benzoins to benzils with TTN (96). 

The interaction between nitromethane, the etherate of boron trifluoride and silver oxide gives rise to an extremely dangerous reaction. However, it is difficult to interpret it. Can it be explained by the unstable property of silver tetrafluoroborate or the destabilising effect of boron trifluoride on nitromethane ... 

Lead tetraacetate can effect oxidation of carbonyl groups, leading to formation of a-acetoxy ketones,215 but the yields are seldom high. Boron trifluoride can be used to catalyze these oxidations. It is presumed to function by catalyzing the formation of the enol, which is thought to be the reactive species.216 With unsymmetrical ketones, products from oxidation at both a-methylene groups are found.217... 

---