Boilers and industrial furnaces

End-of-pipe treatment refers to the application of chemical, biological, and physical processes to reduce the toxicity or volume of downstream waste. Treatment options include biological systems, chemical precipitation, flocculation, coagulation, and incineration as well as boilers and industrial furnaces (BIFs). [Pg.2]

Boilers and industrial furnaces (BIFs)—used primarily for energy and material recovery. [Pg.955]

Source U.S. EPA, Boilers and Industrial Furnaces, 40 CFR Part 266, Subpart H, EPA530-R-99-042, U.S. Environmental Protection Agency, Washington, DC, February 2000. [Pg.970]

U.S. EPA, Standards for the Management of Specific Hazardous Wastes and Specific Types of Hazardous Waste Management Facilities, Hazardous Waste Burned in Boilers and Industrial Furnaces, 40 CFR Part 266, Subpart H, GPO, November 2008. Available at http //ecfr.gpoaccess.gov/cgi/t/text/text-idx c= ecfr Sid=8268e2678cl3ad85b7c08edcfld43927 rgn=div5 view=text node=40 26.0.1.1.1 idno=40 40 26.0.1.1.1.6. [Pg.983]

Various hollow-cone simplex atomizers (Fig. 2.1) have been developed for combustion applications, differing from each other mainly in the way that swirl is imparted to the issuing liquid jet. In these atomizers, swirl chambers may have conical slots, helical slots (or vanes), or tangential slots (or drilled holes). Using thin, removable swirl plates to cut or stamp the swirl chamber entry ports leads to economies of the atomization systems if spray uniformity is not a primary concern. Large simplex atomizers have found applications in utility boilers and industrial furnaces. Oil flow rates can be as high as 67 kg/min. [Pg.30]

Residue Concentration Limit from Burning Hazardous Waste in Boilers and Industrial Furnaces... [Pg.94]

Burning of hazardous waste in boilers and industrial furnaces residue concentration limit... [Pg.141]

Hazardous Waste Burned in Boilers and Industrial Furnaces Regulation of residues Yes 40 CFR 266.112 EPA 1985i... [Pg.573]

The Federal Register (vol. 69, no. 76, April 20, 2004) issued Proposed Rules for Existing and New Sources of HWCs. This included not only the HWIs, CKs, and LWAKs, but also for the first time the solid-fuel-fired boilers, liquid-fuel-fired boilers, and hydrochloric acid production furnaces. The boilers and HCl furnaces had been covered by the Boilers and Industrial Furnaces standards issued as Boiler and Industrial Furnace Act (BIF) in 1991. When MACT was enacted for HWCs on September 30, 1999, the BIFs were not included. The proposed standards were listed in Tables 1 and 2 of the FR of April 20, 2004. [Pg.84]

Standards for Management of Specific Hazardous Wastes Facilities-hazardous waste burned in boilers and industrial furnaces Yes 40 CFR 266.100 EPA 1991 d... [Pg.571]

AMLGM = Amalgamation of Liquid, Elemental Mercury Contaminated with Radioactive Materials BAT = Best Available Technology BIF = Boilers and Industrial Furnaces CAA = Clean Air Act CWA = Clean Water Act ... [Pg.576]

EPA. 1991a. Standards for the management of specific hazardous wastes and specific types of hazardous waste management facilities. Subpart H Hazardous waste burned in boilers and industrial furnaces. U.S. Environmental Protection Agency. Code of Federal Regulations. 40 CFR 266, Subpart HH. [Pg.236]

Technical Implementation Document for EPA s Boiler and Industrial Furnace Regulations... [Pg.94]

EPA. 1991. United States Environmental Protection Agency. Burning of hazardous waste in boilers and industrial furnaces. Fed Regist 56 7134- 7239. [Pg.216]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...