Background correction, atomic absorption

Many of the published methods for the determination of metals in seawater are concerned with the determination of a single element. Single-element methods are discussed firstly in Sects. 5.2-5.73. However, much of the published work is concerned not only with the determination of a single element but with the determination of groups of elements (Sect. 5.74). This is particularly so in the case of techniques such as graphite furnace atomic absorption spectrometry, Zeeman background-corrected atomic absorption spectrometry, and inductively coupled plasma spectrometry. This also applies to other techniques, such as voltammetry, polarography, neutron activation analysis, X-ray fluroescence spectroscopy, and isotope dilution techniques. 

Instrumentation for diode laser based AAS is now commercially available and the method certainly will expand as diode lasers penetrating further into the UV range become available, especially because of their analytical figures of merit that have been discussed and also because of their price. In diode laser AAS the use of monochromators for spectral isolation of the analyte lines becomes completely superfluous and correction for non-element specific absorption no longer requires techniques such as Zeeman-effect background correction atomic absorption or the use of broad band sources such as deuterium lamps. 

See also Atomic Absorption Spectrometry Principles and Instrumentation Interferences and Background Correction. Atomic Mass Spectrometry Inductively Coupled Plasma Laser Microprobe. Liquid Chromatography Column Technology. 

See ATOMIC ABSORPTION SPECTROMETRY Interferences and Background Correction. ATOMIC EMISSION SPECTROMETRY Interferences and Background Correction... 

See also Atomic Absorption Spectrometry Interferences and Background Correction. Atomic Emission Spectrometry Principles and Instrumentation Interferences and Background Correction Flame Photometry Inductively Coupled Plasma Microwave-Induced Plasma. Atomic Mass Spectrometry Inductively Coupled Plasma Laser Microprobe. Countercurrent Chromatography Solvent Extraction with a Helical Column. Derivatization of Analytes. Elemental Speciation Overview Practicalities and Instrumentation. Extraction Solvent Extraction Principles Solvent Extraction Multistage Countercurrent Distribution Microwave-Assisted Solvent Extraction Pressurized Fluid Extraction Solid-Phase Extraction Solid-Phase Microextraction. Gas Chromatography Ovenriew. Isotope Dilution Analysis. Liquid Chromatography Ovenriew. 

Other methods of background correction have been developed, including Zee-man effect background correction and Smith-Iiieffje background correction, both of which are included in some commercially available atomic absorption spectrophotometers. Further details about these methods can be found in several of the suggested readings listed at the end of the chapter. 

M HNO3. The concentration of Cu and Zn in the diluted supernatant is determined by atomic absorption spectroscopy using an air-acetylene flame and external standards. Copper is analyzed at a wavelength of 324.8 nm with a slit width of 0.5 nm, and zinc is analyzed at 213.9 nm with a slit width of 1.0 nm. Background correction is used for zinc. Results are reported as micrograms of Cu or Zn per gram of FFDT. 

Nowka R, Muller H (1997) Direct analysis of solid samples by graphite furnace atomic absorption spectrometry with a transversely heated graphite atomizer and D2-background correction system (SS GF-AAS). Fresenius J Anal Chem 359 132-137. 

Practically all classical methods of atomic spectroscopy are strongly influenced by interferences and matrix effects. Actually, very few analytical techniques are completely free of interferences. However, with atomic spectroscopy techniques, most of the common interferences have been studied and documented. Interferences are classified conveniently into four categories chemical, physical, background (scattering, absorption) and spectral. There are virtually no spectral interferences in FAAS some form of background correction is required. Matrix effects are more serious. Also GFAAS shows virtually no spectral interferences, but... 

Ellen G, Van Loon JW. 1990. Determination of cadmium and lead in foods by graphite furnace atomic absorption spectrometry with Zeeman background correction Test with certified reference materials. Food Addit Contam 7 265-273. 

Chapters 5 and 6 discuss the application of new techniques such as atomic absorption spectrometry with and without graphite furnace and Zeeman background correction, inductively coupled plasma mass spectrometry, X-ray fluo-... 

Lum and Callaghan [ 140 ] did not use matrix modification in the electother-mal atomic absorption spectrophotometric determination of cadmium in seawater. The undiluted seawater was analysed directly with the aid of Zeeman effect background correction. The limit of detection was 2 ng/1. 

Electrothermal atomic absorption spectrophotometry with Zeeman background correction was used by Zhang et al. [141] for the determination of cadmium in seawater. Citric acid was used as an organic matrix modifier and was found to be more effective than EDTA or ascorbic acid. The organic matrix modifier reduced the interferences from salts and other trace metals and gave a linear calibration curve for cadmium at concentrations < 1.6 pg/1. The method has a limit of detection of 0.019 pg/1 of cadmium and recoveries of 95-105% at the 0.2 pg of cadmium level. 

Graphite furnace atomic absorption spectrometry with the L vov platform and Zeeman background correction has been applied to the determination of down to 0.02 xg/l manganese in seawater [452]. 

Knowles M (1987) Varian atomic absorption no AA 71 methods for the determination of cadmium in seawater with Zeeman background correction... 

---