Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Automotive plastic markets

The Declining Market for Linear Phthalates in Automotive Upholstery. The major market for linear phthalates has historically been automotive upholstery. However, the U.S. built share of the automotive market has continued to decline, and the trend (now a landslide) to smaller cars has resulted in a sharp decrease in demand for domestic vinyl upholstery. Besides this, fashion trends have turned to increased use of non-vinyl upholstery. Finally, the use of softer vinyls with higher plasticizer levels means increased opportunities in the automotive upholstery market for diisodecyl phthalate (DIDP). DIDP meets the low temperature requirements of these new softer vinyls, and at the same time offers reduced windshield fogging and lower cost on a... [Pg.191]

Best J.R., 2000 Annual Automotive Plastics Report (Market Search Inc., Toledo, 2000). [Pg.103]

Other sources have listed the automotive RIM market at approximately 41 Mi lbs. in 1982 (BOC) growing to nearly 95 Mi lbs. in 1987, while still another study reports 59 mm for automotive elastomers in 1982 -(Plastics Technology). This last figure of 59 Mi lbs. includes application in buses, trucks, and recreational vehicles. Table II gives data for industrial consumer products. The types of applications in these areas have been discussed previously (2) but include such markets as electronic cabinetry, recreational, shoes, agricultural and various appliances. [Pg.4]

Automotive Plastics Report 1999-2000. Market Search, Inc. http //www.plasticstoday.com... [Pg.43]

Plastics Brief Series —Injection Molding —Extrusion —Blow Molding Thermoplastic Markets Design Materials Reinforced Plastics Automotive Plastic News... [Pg.652]

Automotive Plastics Report—2000, 21st Annual Multiclient Study of Automotive Plastics Opportunities, Market Search, 2000. [Pg.745]

Pritchard G. Plants move up the reinforced plastics agenda, Reinf Plast. 2007 51(10) 28-31. Report by Markets and Markets, Inc., 2013. Available at www.marketsandmarkets.com/Market-Repoits/automotive-plastics-maiket-passenger-cars-506.html. Accessed October 8, 2014. [Pg.143]

Automotive Plastics Global Markets to 2010, Margolis Polymers, Keansburg, NJ, USA, 2003. [Pg.1043]

Most of the plated plastics market is for automotive parts. However, a significant number of nonautomotive parts are plated and used for marine hardware, plumbing fixtures, packaging, and appliance and furniture hardware. One of the most important applications for elec-troless-plated plastics parts and all forms of metallized plastics is the... [Pg.821]

Chapter 2 provides an executive summary of the most important points arising Irom the report. There follows an overview of significant trends in the four largest plastics market sectors, namely packaging, construction, automotive, and electrical and electronic applications (Chapter 3). This is followed by a brief discussion of some regional issues. [Pg.2]

Outlook for Automotive Plastics Coatings An Analysis of the North American Market may be accessed online at http //www.chemquest.com/PDF-files/Outlook%20foi%20Auto%20Plastics% 20Coating%20(SA%20%20MB)%205-99.pdf... [Pg.448]

Automobiles are mostly steel, by weight. However, the automotive industry comprises a large percentage of the consumer market for aluntinum, iron, and magnesium. The automotive industry does not dominate the plastics market. [Pg.163]

Electrical components were the most dominant application for automotive plastics as the segment accounted for 37% of total market volume in 2013. Electrical components were followed by interior and exterior fiomishings at 32.8% of total market volume in the same year. Power trains are expected to be the fastest growing application market for automotive plastics at an estimated CAGR of 10.4% from 2014 to 2020. [Pg.49]

Mann D, Van den Bos JC, Way A. Automotive plastics composites— worldwide markets and... [Pg.669]

The market share of automotive has declined only slightly during the last three years. Growth in automotive plastics was bolstered by continued substitution of traditional materials, despite the sharp downturn in automotive production. [Pg.6]

See other pages where Automotive plastic markets is mentioned: [Pg.1]    [Pg.3]    [Pg.3]    [Pg.11]    [Pg.13]    [Pg.21]    [Pg.27]    [Pg.29]    [Pg.35]    [Pg.39]    [Pg.41]    [Pg.45]    [Pg.1]    [Pg.3]    [Pg.3]    [Pg.11]    [Pg.13]    [Pg.21]    [Pg.27]    [Pg.29]    [Pg.35]    [Pg.39]    [Pg.41]    [Pg.45]    [Pg.277]    [Pg.139]    [Pg.712]    [Pg.159]    [Pg.277]    [Pg.188]    [Pg.357]    [Pg.227]    [Pg.277]    [Pg.772]    [Pg.104]    [Pg.294]    [Pg.343]    [Pg.238]    [Pg.571]    [Pg.229]    [Pg.340]    [Pg.207]    [Pg.129]    [Pg.838]    [Pg.365]   
See also in sourсe #XX -- [ Pg.3 ]



SEARCH



Automotive market

Plastics marketing

© 2024 chempedia.info