Atmosphere physical properties

General Properties of the Atmosphere—Physical Properties—Density—Compressibility—Specific Heat—Solubility-- Radioactivity. 

Physical properties. All solid except m -cresol, CH3CJH4OH, which is a liquid. All colourless when pure, but frequently slightly coloured due to atmospheric oxidation. All have in varying degrees a characteristic odour of carbolic acid. Phenol, the cresols and resorcinol have a caustic action on the skin. 

Alkenes resemble alkanes m most of their physical properties The lower molecular weight alkenes through 4 are gases at room temperature and atmospheric pressure The dipole moments of most alkenes are quite small Among the 4 isomers 1 butene cis 2 butene and 2 methylpropene have dipole moments m the 0 3-05 D range trans 2 butene has no dipole moment Nevertheless we can learn some things about alkenes by looking at the effect of substituents on dipole moments... 

Ben2onitri1e [100-47-0] C H CN, is a colorless Hquid with a characteristic almondlike odor. Its physical properties are Hsted in Table 10. It is miscible with acetone, ben2ene, chloroform, ethyl acetate, ethylene chloride, and other common organic solvents but is immiscible with water at ambient temperatures and soluble to ca 1 wt% at 100°C. It distills at atmospheric pressure without decomposition, but slowly discolors in the presence of light. 

Pure Elements. AH of the hehum-group elements are colorless, odorless, and tasteless gases at ambient temperature and atmospheric pressure. Chemically, they are nearly inert. A few stable chemical compounds are formed by radon, xenon, and krypton, but none has been reported for neon and belium (see Helium GROUP, compounds). The hehum-group elements are monoatomic and are considered to have perfect spherical symmetry. Because of the theoretical interest generated by this atomic simplicity, the physical properties of ah. the hehum-group elements except radon have been weU studied. 

Other techniques include oxidative, steam atmosphere (33), and molten salt (34) pyrolyses. In a partial-air atmosphere, mbber pyrolysis is an exothermic reaction. The reaction rate and ratio of pyrolytic filler to ok products are controlled by the oxygen flow rate. Pyrolysis in a steam atmosphere gives a cleaner char with a greater surface area than char pyroly2ed in an inert atmosphere however, the physical properties of the cured compounded mbber are inferior. Because of the greater surface area, this pyrolytic filler could be used as activated carbon, but production costs are prohibitive. Molten salt baths produce pyroly2ed char and ok products from tine chips. The product characteristics and quantities depend on the salt used. Recovery of char from the molten salt is difficult. 

The durabihty and versatility of steel are shown by its wide range of mechanical and physical properties. By the proper choice of carbon content and alloying elements, and by suitable heat treatment, steel can be made so soft and ductile that it can be cold-drawn into complex shapes such as automobile bodies. Conversely, steel can be made extremely hard for wear resistance, or tough enough to withstand enormous loads and shock without deforming or breaking. In addition, some steels are made to resist heat and corrosion by the atmosphere and by a wide variety of chemicals. 

Physical Properties. Trichloromethanesulfenyl chloride [594-42-3] (perchloromethyl mercaptan, a misnomer but used as the common commercial name), CCl SCl, is a strongly acrid, pale yellow Hquid, boiling at 149°C with some decomposition at atmospheric pressure, 68°C at 6.93 kPa (52... 

In the fire codes, the atmospheric boiling point is an important physical property used to classify the degree of hazardousness of a Hquid. If a mixture of Hquids is heated, it starts to bod at some temperature but continues to rise ia temperature over a boiling temperature range. Because the mixture does not have a definite boiling poiat, the NFPA fire codes define a comparable value of boiling poiat for the purposes of classifying Hquids. For petroleum mixture, it is based on the 10% poiat of a distillation performed ia accordance with ASTM D86, Standard Method of Test for Distillation of Petroleum Products. 

Selected physical properties of sodium thiosulfate pentahydrate are shown in Table 1. The crystals are relatively stable, efflorescing in warm, dry air and dehquescing slightly in moist air. They melt in their water of hydration at 48°C and can be completely dehydrated in a vacuum oven at this temperature, or at atmospheric pressure at 105°C. Anhydrous sodium thiosulfate can also be crystallised direcdy from a 72% solution above 75°C. It decomposes at 233°C ... 

Titanium Silicides. The titanium—silicon system includes Ti Si, Ti Si, TiSi, and TiSi (154). Physical properties are summarized in Table 18. Direct synthesis by heating the elements in vacuo or in a protective atmosphere is possible. In the latter case, it is convenient to use titanium hydride instead of titanium metal. Other preparative methods include high temperature electrolysis of molten salt baths containing titanium dioxide and alkalifluorosiUcate (155) reaction of TiCl, SiCl, and H2 at ca 1150°C, using appropriate reactant quantities for both TiSi and TiSi2 (156) and, for Ti Si, reaction between titanium dioxide and calcium siUcide at ca 1200°C, followed by dissolution of excess lime and calcium siUcate in acetic acid. 

Butadiene is a noncorrosive, colorless, flammable gas at room temperature and atmospheric pressure. It has a mildly aromatic odor. It is sparingly soluble in water, slightly soluble in methanol and ethanol, and soluble in organic solvents like diethyl ether, ben2ene, and carbon tetrachloride. Its important physical properties are summarized in Table 1 (see also references 11, 12). 1,2-Butadiene is much less studied. It is a flammable gas at ambient conditions. Some of its properties are summarized in Table 2. 

Arsenic exists as grey, yellow and black forms of differing physical properties and susceptibilities towards atmospheric oxygen. The general chemistry is similar to that of phosphorus but whereas phosphorus is non-metallic, the common form of arsenic is metallic. Traces of arsenides may be present in metallic residues and drosses these may yield highly toxic arsine, ASH3, with water. 

At room temperature and atmospheric pressure ammonia is a colourless, alkaline gas with a pungent smell. It dissolves readily in water. Physical properties are summarized in Table 9.6. The effect of temperature on vapour pressure of anhydrous ammonia is shown in Figure 9.2. 

Selected physical properties of oxygen are included in Table 9.24. It is a colourless, odourless and tasteless gas which is essential for life and considered to be non-toxic at atmospheric pressure. It is somewhat soluble in water and is slightly heavier than air. Important uses are in the steel and glass industries, oxyacetylene welding, as a chemical intermediate, waste-water treatment, fuel cells, underwater operations and medical applications. 

There are literally many thousands of chemical compounds that are potential air pollutants. It would be impossible to present all the pertinent data and information needed to evaluate each and every air pollution scenario. There are, however, a wealth of information and data bases that are available on the worldwide Web, along with a number of standard hard copy references to obtain information on the chemical and physical properties, and health risks of potential atmospheric contaminants. 

Selected chemical and physical properties, and data of common and potential atmospheric contaminants,... 

SELECTED CHEMICAL AND PHYSICAL PROPERTIES OF POTENTIAL ATMOSPHERIC POLLUTANTS... 

Table 1 is a compilation of chemical and physical properties data for selected atmospheric contaminants. This information is useful for evaluating pollution problems. The following are abbreviations used in the table. 

---