Aromatic fluorides, synthesis

Aromatic fluorides, synthesis of, 5, 4 Aromatic hydrocarbons, synthesis of, 1, 6 30, 1... 

Cross-linked styrene/2-(4-chlorophenyl)prop-l-ene copolymer grafted to a tetraphenylphos-phonium salt is an effective reusable catalyst for the synthesis of aromatic fluorides from aromatic chlorides in the presence of potassium fluoride. ... 

The synthesis of 7-azaindoles is a challenging task and there are few efficient routes to substituted derivatives. In the laboratory of C. Thibault, the concise and efficient synthesis of 4-fluoro-1/-/-pyrrolo[2,3-jb]pyridine was achieved. The fluorination was carried out using the Balz-Schiemann reaction. The aromatic amine precursor was prepared via the Buchwald-Hartwig coupling of the aryl chloride with A/-allylamine followed by deallylation. The diazonium tetrafluoroborate intermediate was generated at 0 C and it decomposed spontaneously in 48% HBF4 solution to afford the desired aromatic fluoride. 

Yokoyama, M. Toyoshima, H. Shimizu, M. Mito, J. Togo, H. Simple synthesis of aromatic 3-C-nucleosides via coupling of aryl grignard reagents with sugar fluorides. Synthesis 1998, 409 12. 

Yamada S, I ochel P (2010) Large-scale preparation of aromatic fluorides via electrophilic fluorination with functionalized aryl- or heteroarylmagnesium reagents. Synthesis 2490-2494... 

CoF is used for the replacement of hydrogen with fluorine in halocarbons (5) for fluorination of xylylalkanes, used in vapor-phase soldering fluxes (6) formation of dibutyl decalins (7) fluorination of alkynes (8) synthesis of unsaturated or partially fluorinated compounds (9—11) and conversion of aromatic compounds to perfluorocycHc compounds (see Fluorine compounds, organic). CoF rarely causes polymerization of hydrocarbons. CoF is also used for the conversion of metal oxides to higher valency metal fluorides, eg, in the assay of uranium ore (12). It is also used in the manufacture of nitrogen fluoride, NF, from ammonia (13). 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

The synthesis of 3-aryltetrahydroisoquinolines was accomplished by electrophilic aromatic substitution of polysubstituted phenols and phenyl ethers with Lewis acid-generated tosyliminium ions of 2-tosyl-3-methoxytetrahydroisoquinoline derivatives <00SL801>. In addition isoquinoline was reported to react with N-tosylated (R)- or (S)-amino acid fluorides to afford optically active dihydroimidazoisoquinolinones. The reaction proceeds via acylation followed by attack of the tosylamino group at Cl of the intermediate 2-tosylaminoacylisoquinolinium salt <00TL5479>. 

The Hiyama coupling offers a practical alternative when selectivity and/or availability of other reagents are problematic. Hiyama et al. coupled alkyltrifluorosilane 74 with 2-bromofuran 73 to give the corresponding cross-coupled product 75 in moderate yield in the presence of catalytic Pd(Ph3P)4 and 3 equivalents of TBAF [65]. In this case, more than one equivalent of fluoride ion was needed to form a pentacoordinated silicate. On the other hand, alkyltrifluorosilane 74 was prepared by hydrosilylation of the corresponding terminal olefin with trichlorosilane followed by fluorination with C11F2. This method provides a facile protocol for the synthesis of alkyl-substituted aromatic compounds. 

Miller et al. [87,88] have described the synthesis of hyperbranched aromatic poly(ether-ketone)s based on monomers containing one phenolic group and two fluorides which were activated towards nucleophilic substitution by neighboring groups. The molecular weight and polydispersity of the formed po-ly(ether-ketone)s could be controlled by reaction conditions such as monomer concentration and temperature. The formed polymers had high solubility in common solvents such as THF. 

Nucleophilic substitutions with [ F]fluoride have been largely developed both in aromatic (SNAr) and aliphatic (generally SN2) series. Nucleophilic additions remain rare. F-Nucleophilic radiofluorinations usually do not require any carrier and thus enable the synthesis of products with high specific radioactivity. The SN can be performed either directly on a suitable and generally complex precursor of the target molecule or indirectly via a small labelled precursor. Both approaches present drawbacks the first one generally leads to poor yields and the second requires multistep synthesis and more sophisticated automation processes. 

Like aldehyde, the ketone function provides sufficient activation on an aromatic ring for the nucleophiUc substitution. Reduction of the carbonyl group after incorporation of the F-fluoride ion yields F-alkyl aromatics [177]. This methodology using F for trimethylammonium exchange, then reduction of the carbonyl compound, have proved to be useful for the synthesis of a [2- F]fluo-rophenol at high specific activity [141] (Scheme 39). 

A synthesis of the B-ring aromatic corticosteroid (286), the analogue of cortex-olone, started with the previously reported B-ring aromatic norpregnane (285). Development of the corticosteroid side-chain employed bromination of the 17a-hydroxy-20-oxo-derivative with trimethylphenylammonium bromide perbromide. " Reaction of perchloryl fluoride with the mixed enol ethers (287) and (288) provided, after hydrolysis, the 17a-fluoro-20-oxo-compound (290) and the 21-fluoro-20-oxo-compound (291). In contrast, the enamine (289) led only to the 17a,21-difluoro-20-oxo-compound. A series of 17a-acyloxy-21-deoxy-... 

These compounds can be prepared by using either classical processes for synthesis of amino acids (starting from the ad hoc precursor bearing fluorine on the aromatic moiety) or electrophilic fluorination of the arene moiety (e.g., elemental fluorine, xenon fluoride, acetyl hypofluorite). Although these methods are often poorly regioselective, they are useful for the preparation of F labeled molecules used in PET, for example, F tyrosine and dihydrophenylalanine (L-Dopa). ... 

Aromatic fiuorination by the silver ion-promoted decomposition of aryl-diazo sulfides is similar to the Balz-Schiemann process. It provides efficient utilization of stoichiometric levels of fluoride ion, but has yet to be used for heterocyclic synthesis (91JOC4993). 

Simultaneous use of the Fricdcl-Craft catalytic properties of anhydrous hydrogen fluoride and its fluorinating activity in Cl-F replacement reactions has been utilized in the synthesis of numerous trifluoromethyl aromatics (phenyl, biphenyl, and naphthyl derivatives).246 247 The process is based on the action of carbon tetrachloride/hydrogen fluoride (excess) on aromatics, for example, formation of 16,246 17,246 18 and 19.246... 

Both aromatic and aliphatic fluoroformates 7 can be readily prepared from phenols or alcohols and carbonyl difluoride and treated with sulfur tetrafluoride without isolation. Hydrogen fluoride evolved in the reaction of hydroxy compounds with carbonyl di fluoride serves as a catalyst for the consecutive reaction with sulfur tetrafluoride.15<)-162 This provides a general, convenient, direct synthesis of aryl and alkyl trifluoromethyl ethers 5 from phenols and alcohols. When the intermediate fluoroformate 7 is isolated prior to treatment with sulfur tetrafluoride, at least one mole equivalent of hydrogen fluoride is necessary to promote the fluorination reaction. 159 163 Representative examples of the conversion of hydroxy compounds 6 into trifluoromethyl ethers 5 via intermediate fluoroformates 7 are given (for other examples 7 -> 5, see Houben-Weyl, Vol. E4, pp 628. 629). 

The nucleophilic displacement of halogens in aromatic compounds by fluorine is aided by utilizing an appropriate catalyst. Polymer-supported aminopyridinium salts have been found to be versatile catalysts for the synthesis of aryl fluorides. The advantage of the catalyst is that it can be recycled and used again. l-Chloro-4-nitrobenzene (3) is converted to l-fluoro-4-nitrobenzene (4) in 71 % isolated yield using this method. The catalyst used has the structure 5.91... 

Synthesis of Aromatic and Heteroaromatic Fluoro Compounds by Diazotization in Anhydrous Hydrogen Fluoride... 

Other Formylations. Formyl fluoride, the only known stable formic acid derivative, can be used to perform Friedel-Crafts-type acylation to form aromatic aldehydes. The method was developed by Olah and Kuhn.105 Although a number of Lewis acids may be used, BF3 is the best catalyst. It is dissolved in the aromatic compound to be formylated then formyl fluoride is introduced at low temperature and the reaction mixture is allowed to warm up to room temperature. The aldehydes of benzene, methylbenzenes, and naphthalene were isolated in 56-78% yields. Selectivities are similar to those in the Gattermann synthesis ( toiuene benzene = 34.6, 53.2% para isomer). The reacting electrophile was suggested to be the activated HCOF BF3 complex and not the free formyl cation. Clearly there is close relationship with the discussed CO—HF—BF3 system. 

---