Typical aqueous solution preparation

Typical Aqueous Solution Preparation (70% non-volatile in 2-Bu-toxyethanol). A cold cut was made of 105 grams of the epoxy ester and 45 grams of 2-butoxyethanol. To this solution were added 8.41 grams triemylamine, 100% neutralization based on the pretitrated acidity. Wa-... 

Interfdci l Composite Membra.nes, A method of making asymmetric membranes involving interfacial polymerization was developed in the 1960s. This technique was used to produce reverse osmosis membranes with dramatically improved salt rejections and water fluxes compared to those prepared by the Loeb-Sourirajan process (28). In the interfacial polymerization method, an aqueous solution of a reactive prepolymer, such as polyamine, is first deposited in the pores of a microporous support membrane, typically a polysulfone ultrafUtration membrane. The amine-loaded support is then immersed in a water-immiscible solvent solution containing a reactant, for example, a diacid chloride in hexane. The amine and acid chloride then react at the interface of the two solutions to form a densely cross-linked, extremely thin membrane layer. This preparation method is shown schematically in Figure 15. The first membrane made was based on polyethylenimine cross-linked with toluene-2,4-diisocyanate (28). The process was later refined at FilmTec Corporation (29,30) and at UOP (31) in the United States, and at Nitto (32) in Japan. 

Typical gels are prepared from aqueous solutions of reactants such as sodium aluminate, NaOH, and sodium siUcate other reactants include alumina trihydrate (AI2O2 3H2O), coUoidal siUca, and siUcic acid. Some synthetic 2eohtes prepared from sodium aluminosihcate gels are given in Table 3. 

Bleach Liquor. Bleach Hquor or lime bleach Hquor is an aqueous solution of calcium hypochlorite and calcium chloride. It typically contains 30—35 g/L of available chlorine, though it may be as high as 85 g/L. It has been used in pulp bleaching, when it can be made more cheaply than sodium hypochlorite. It is prepared on site by chlorinating lime solutions. 

Polyethylene. Low pressure polymerization of ethylene produced in the Phillips process utilizes a catalyst comprised of 0.5—1.0 wt % chromium (VI) on siUca or siUca-alumina with pore diameter in the range 5—20 nanometers. In a typical catalyst preparation, the support in powder form is impregnated with an aqueous solution of a chromium salt and dried, after which it is heated at 500—600°C in fluid-bed-type operation driven with dry air. The activated catalyst is moisture sensitive and usually is stored under dry nitrogen (85). 

Because of possible catalytic and biological relevance of metal-sulfur clusters, several such compounds of cobalt have been prepared. The action of H2S or M2S (M = alkali metal) on a non-aqueous solution of a convenient cobalt compound (often containing, or in the presence of, a phosphine) is a typical route. Diamagnetic [Co6Ss(PR3)6] (R = Et, Ph) comprise an octahedral array of metal atoms (Co-Co in the range 281.7 to 289.4pm), all faces capped by atoms,and show facile redox behaviour... 

By the chlorination of 3-ethynyl-, 4-ethynyl-, and 5-ethynyl-l-methylpyrazole with KOCl the corresponding compounds were synthesized in 98%, 100%, and 94% yields. The typical procedure is as follows To an aqueous solution of KOX (0.64 N) in 12.5% KOH, prepared from the corresponding halogen and potassium hydroxide in water at 5-10°C, was added the terminal acetylene, followed by stirring at room temperature until the complete disappearance of the starting material. 

The property of thermal, reversible gelation is obtained by the addition of water-soluble proteins and protein degradation products to an aqueous solution of poly (vinyl alcohol) 2). Protein products such as albumin, gelatin, glue, a-amino acids, and their condensation products—diketopiperazines—may be used. A typical formulation for the preparation of a thermally reversible gel is ... 

---