Anode reactions standard potential

Peroxodisulfate — Peroxodisulfuric acid (H2S208) is prepared through the - electrolysis of concentrated -> sulfuric acid with a smooth platinum -> anode. The -> standard potential of the redox reaction 2SC>4 S20 + 2e is E = +2.05 V vs. SHE. 

Examples of anodic reactions Standard equilibrium half-cell potentials(a), E° (mV vs. SHE)... 

The standard potential for the anodic reaction is 1.19 V, close to that of 1.228 V for water oxidation. In order to minimize the oxygen production from water oxidation, the cell is operated at a high potential that requires either platinum-coated or lead dioxide anodes. Various mechanisms have been proposed for the formation of perchlorates at the anode, including the discharge of chlorate ion to chlorate radical (87—89), the formation of active oxygen and subsequent formation of perchlorate (90), and the mass-transfer-controUed reaction of chlorate with adsorbed oxygen at the anode (91—93). Sodium dichromate is added to the electrolyte ia platinum anode cells to inhibit the reduction of perchlorates at the cathode. Sodium fluoride is used in the lead dioxide anode cells to improve current efficiency. 

The potential of the reaction is given as = (cathodic — anodic reaction) = 0.337 — (—0.440) = +0.777 V. The positive value of the standard cell potential indicates that the reaction is spontaneous as written (see Electrochemical processing). In other words, at thermodynamic equihbrium the concentration of copper ion in the solution is very small. The standard cell potentials are, of course, only guides to be used in practice, as rarely are conditions sufftciendy controlled to be called standard. Other factors may alter the driving force of the reaction, eg, cementation using aluminum metal is usually quite anomalous. Aluminum tends to form a relatively inert oxide coating that can reduce actual cell potential. 

The thermodynamics of electrochemical reactions can be understood by considering the standard electrode potential, the potential of a reaction under standard conditions of temperature and pressure where all reactants and products are at unit activity. Table 1 Hsts a variety of standard electrode potentials. The standard potential is expressed relative to the standard hydrogen reference electrode potential in units of volts. A given reaction tends to proceed in the anodic direction, ie, toward the oxidation reaction, if the potential of the reaction is positive with respect to the standard potential. Conversely, a movement of the potential in the negative direction away from the standard potential encourages a cathodic or reduction reaction. 

Electrode Potential (E) the difference in electrical potential between an electrode and the electrolyte with which it is in contact. It is best given with reference to the standard hydrogen electrode (S.H.E.), when it is equal in magnitude to the e.m.f. of a cell consisting of the electrode and the S.H.E. (with any liquid-junction potential eliminated). When in such a cell the electrode is the cathode, its electrode potential is positive when the electrode is the anode, its electrode potential is negative. When the species undergoing the reaction are in their standard states, E =, the stan-... 

The negative standard potential means that the Zn2+/Zn electrode is the anode in a cell with H+/H2 as the other electrode and, therefore, that the reverse of the cell reaction, specifically... 

C (298.15 K) and 1 bar. standard cell potential See standard emf. standard emf ( °) The emf when the concentration of each solute taking part in the cell reaction is 1 mol-L 1 (strictly, unit activity) and all the gases are at 1 bar. The standard emf of a galvanic cell is the difference between its two standard potentials E° = E°(cathode) — °(anode). 

Trigonal, metallic selenium has been investigated as photoelectrode for solar energy conversion, due to its semiconducting properties. The photoelectrochemistry of the element has been studied in some detail by Gissler [35], A photodecomposition reaction of Se into hydrogen selenide was observed in acidic solutions. Only redox couples with a relatively anodic standard potential could prevent dissolution of Se crystal. 

It was concluded from this and related works that suppression of the photodissolution of n-CdX anodes in aqueous systems by ions results primarily from specific adsorption of X at the electrode surface and concomitant shielding of the lattice ions from the solvent molecules, rather than from rapid annihilation of photogenerated holes. The prominent role of adsorbed species could be illustrated, by invoking thermodynamics, in the dramatic shift in CdX dissolution potentials for electrolytes containing sulfide ions. The standard potentials of the relevant reactions for CdS and CdSe, as well as of the sulfide oxidation, are compared as follows (vs. SCE) [68] ... 

The phenomenological treatment assumes that the Gibbs energies of activation Gox and Gred depend on the electrode potential , but that the pre-exponential factor A does not. We expand the energy of activation about the standard equilibrium potential >0o of the redox reaction keeping terms up to first order, we obtain for the anodic reaction ... 

The cathode reaction comes directly from a table of standard reduction potentials, while the anode reaction is the reverse reaction from such a table. However, how did we know that it was the fluorine reaction requiring reversal ... 

Let us now suppose that the waveform of figure 16.3 is applied to study the reversible oxidation of a species R to R in a given solvent. The reaction occurs at the working electrode (anode), and /i°(R/R ) is the standard potential of the R/R- couple. Because the standard potential of the reference electrode in our cell is known accurately relative to the standard potential of the SHE (E° = 0 by definition), we can write the cell reaction and the Nernst equation as... 

Standard potential of the second electron transfer more anodic than that of the first electron transfer (AE01 positive). The case in which the product Ox, generated by the chemical reaction following the first electron transfer, is more easily reduced than the original species Ox constitutes another common ECE mechanism in inorganic electrochemistry. 

A bare surface of silicon can only exist in fluoride containing solutions. In reality, in these media, the electrode is considered to be passive due to the coverage by Si— terminal bonds. Nevertheless, the interface Si/HF electrolyte constitutes a basic example for the study of electrochemical processes at the Si electrode. In this system, the silicon must be considered both as a charge carrier reservoir in cathodic reactions, and as an electrochemical reactant under anodic polarization. Moreover, one must keep in mind that, according to the standard potential of the element, both anodic and cathodic charge transfers are involved simultaneously (corrosion process) in a wide range of potentials. 

Again it seems not necessary to discuss the considerations of the chemical versus electrochemical reaction mechanism. It is clear from the extremely negative standard potential of silicon, from Eqs. (2) and (6), that the Si electrode is in all aqueous solutions a dual redox system, characterized by its OCP, which is the resultant of an anodic Si dissolution current and a simultaneous reduction of oxidizing species in solution. The oxidation of silicon gives four electrons that are consumed in the reduction reaction. Experimental results show clearly that the steady value of the OCP is narrowly dependent on the redox potential of the solution components. In solutions containing only HF, alternatively alkaline species, the oxidizing component is simply the proton H+ or the H2O molecule respectively. 

The energy available from spontaneous cell reactions can be used to power vehicles or generate electricity (Box 12.2). To calculate the standard cell potential for a spontaneous process, we must combine the standard potential of the cathode half-reaction (reduction) with that of the anode half-reaction (oxidation) in such a way as to obtain a positive... 

The diffusion of the electroactive ions is both physical and due to electron transfer reactions.45 The occurrence of either or both mechanisms is a function of the electroactive species present. It has been observed that the detailed electrochemical behaviour of the electroactive species often deviates from the ideal thin film behaviour. For example, for an ideal nemstian reaction under Langmuir isotherm conditions there should be no splitting between the anodic and cathodic peaks in the cyclic voltammogram further, for a one-electron charge at 25 °C the width at half peak height should be 90.6 mV.4 In practice a difference between anodic and cathodic potentials may be finite even at slow scan rates. This arises from kinetic effects of phase formation and of interconversion between different forms of the polymer-confined electroactive molecules with different standard potentials.46... 

This equation has a standard electrode potential of -0.447 V. Thus, the solution containing mercuric and chloride ions in contact with iron forms a battery. The reduction of the complex ions to metallic mercury is the cathodic reaction. The dissolution of iron is the anodic reaction. The overall reaction in the battery is given by the addition of Equation (13.42) and Equation (13.43). Due to the high value of its reversible cell voltage under standard conditions (0.85 V), it is expected that a very low equilibrium concentration of the complex ion can be achieved. 

The standard potentials are reasonable values to take into consideration with (4) and (5). Although the initial concentration of Pd2+ and S2Og are zero, they would increase during prolonged electrolysis if these species were the principal products. In the case of (3), however, the buffering of the solution prevents the buildup of [H+], and it would be more appropriate to take the. E-value calculated for pH 7.0 in Example 2, 0.82 V. It is apparent that of the three, (3) has the smallest E-value and the reverse of (3) would occur most readily among the possible anode reactions. 

The anodic synthesis of ozone from anodic oxidation of water in sulfuric acid media has been known since 1840. The reaction and its standard potential are ... 

Battery technology Electrolyte Mobile species in electrolyte Anode reaction during discharge Cathode reaction during discharge Standard cell potential / V Gravimetric energy density/ Wh kg-1 Notes... 

Reversibility — This concept is used in several ways. We may speak of chemical reversibility when the same reaction (e.g., -> cell reaction) can take place in both directions. Thermodynamic reversibility means that an infinitesimal reversal of a driving force causes the process to reverse its direction. The reaction proceeds through a series of equilibrium states, however, such a path would require an infinite length of time. The electrochemical reversibility is a practical concept. In short, it means that the -> Nernst equation can be applied also when the actual electrode potential (E) is higher (anodic reaction) or lower (cathodic reaction) than the - equilibrium potential (Ee), E > Ee. Therefore, such a process is called a reversible or nernstian reaction (reversible or nerns-tian system, behavior). It is the case when the - activation energy is small, consequently the -> standard rate constants (ks) and the -> exchange current density (jo) are high. 

For solution redox couples uncomplicated by irreversible coupled chemical steps (e.g. protonation, ligand dissociation), a standard (or formal) potential, E°, can be evaluated at which the electrochemical tree-energy driving force for the overall electron-transfer reaction, AG c, is zero. At this potential, the electrochemical rate constants for the forward (cathodic) and backward (anodic) reactions kc and ka (cms-1), respectively, are equal to the so-called "standard rate constant, ks. The relationship between the cathodic rate constant and the electrode potential can be expressed as... 

---