Anhydrid, acetic chromic

In 1997, the major manufacturers of chromium compounds were (1) chromic(VI) acid, including chromic(VI) anhydride and chromic(VI) trioxide (total capacity 76,000 metric tons) American Chrome Chemicals Inc., Corpus Christi, Texas Occidental Chemical Corporation Specialty Business Group, Castle Hayne, North Carolina (2) chromium(III) sulfate Blue Grass Chemical Specialties, L.P., New Albany, Indiana Johnson Matthey, Inc., Ward Hill, Massachusetts Wayne Chemical Corp., Amarillo, Texas, Dakota City, Nebraska, and Milwaukee, Wisconsin (3) chromium(III) acetate Blue Grass Chemical Specialties, L.P., McGean-Rohco, Inc., Cleveland, Ohio The Shepard Chemical Company, Cincinnati, Ohio (4) chromium acetylacetonate MacKenzie Corporation, Bush, Louisiana The Shepard Chemical Company, Cincinnati, Ohio (5) chromium boride Cerac Incorporated, Milwaukee,... 

Analogous reactions have been performed in similar benzo- and naphthopy-rane series [101]. Oxidation of benzopyrane derivatives YIII/174 with chromic acid/acetic acid, chromic acid anhydride/acetic acid anhydride, Jones reagent, or ozone gave only complex mixtures of products. Only raefa-chloroperoxyben-zoic acid in dichloromethane was successful (VIII/175 as naphthoketolactones with n = 4, 5, 6 in 70, 49, and 60% yield). 

In the presence of acetic anhydride, acetic acid, and sulfuric acid, chromic acid (chromium trioxide) converts o-nitrotoluene and p-nitro-toluene into the corresponding nitrobenzaldehyde diacetates, from which the aldehydes are obtained on hydrolysis (equation 174) [547, 548, 549. ... 

Chlorotrifluoromethylcarbene, 223 N-Chlorourethane, 60, 61 AM-Cholestadiene-3,6-dione, 60 5a-Cliolestane-3,6-dione, 60 5oCholestane-2a , 3a-oxide, 135 5CfrCholestane-2j3,3(3-oxide, 135 5(3-Cholestanone-3,6-dione, 60 A4-Cholestene-3,6-dione, 60, 65 Al-5/3-Cholestene-3,6-dione, 60 A4-Cholestene-3-one, 98 A4-Cholestene-4-one, 60 -Cholestene-a-epoxide, 116 A5-Cholestenone, 65 Cholesteryl acetate, 35, 171 Cholesteryl acetate dibromide, 40 Chromic acid, 54, 246 Chromic anhydride, 54-57, 150 Chromic anhydride-Acetic acid, 56 Chromic anhydride-Dimethylformamide, 56 Chromic anhydride-Pyridine complex,... 

When W-acetyltetrahydrojervine (LXIV) is reacted with phosphorus pentachloride a desoxychloro derivative (LXXXIV) is formed which on ring scission with sulfuric acid in acetic anhydride-acetic acid gives rise to the 0,iV-diacetyl compound LXXXV. This on partial hydrolysis with alkali affords an W-acetyl compound (LXXXVI) which on reacetylation yields an isomeric diacetyl derivative (LXXXVII) in analogy with similar reactions of tetrahydrojervine. The AT-acetyl derivative (LXXXVI) on chromic acid oxidation formed a ketone (LXXXVIII) with a reactive carbonyl (66). 

OXIDATION, REAGENTS Acetyl nitrate. Bis(tri-n-butyltin)oxide. Bromine-Hexameth-ylphosphoric triamide. f-Butyl perbenzoate. Ceric ammonium nitrate. N-chlorosuc-cinimide-Dimethyl sulfide. Chromic add. Chromic anhydride. Chromic anhydride-Acetic anhydride. Chromic anhydride-Hexamethylphosphoric triamide. 2,3-Dichloro-5,6-dicyano-l,4-benzoquinone. Dimethyl sulfoxide. Dimethyl sulfoxide-Trifluoro-acetic anhydride. Diphenylseleninlc anhydride. Iodine tris(trifluoroacetate). Lead tetraacetate. N-Methylmorpholine -N-oxide. p-NitrobenzenesulfonyI peroxide. Oxygen, singlet. Palladlumfll) chloride. Peroxybcnzimidic acid. Phenylseleninyl chloride. N-Phenyl-l,2,4-triazoline-3,5-dione. Potassium chromate. Potassium superoxide. Pyri-dinium chlorodiromate. Salcomine. Silver carbonate-Celite. Sodium hypochlorite. Sulfuryl chloridc-Silica gel. Thallium(III) acetate. ThaUium(III) nitrate. Triphenyl phosphite ozonide. Trltyl tetrafluoroborate. Uranium hexafluoride. 

Chromium Anhydride or Chromic Acid (C1O3) - Ignites on contact with acetic acid and alcohol and may react sufficiently vigorously with other organic materials to ignite. 

Acetic acid, (M.Wt. 60.05). Very hygroscopic. Water and other impurities can be removed by adding excess acetic anhydride and chromic trioxide (2 g 100 ml ), heating to near boiling point (118°C) for an hour, and then fractionally distilling. An alternative purification uses fractional freezing of glacial acetic acid (pure material freezes at 16.6°C). 

By oxidation of the methyl derivative of an aromatic hydrocarbon with a solution of chromic anhydride in acetic anhydride and acetic acid. The aldehyde formed is immediately converted into the (/m-diacetate, which is stable to oxidation. The diacetate is collected and hydrolysed with sulphuric acid, for example ... 

Equip a I litre three-necked flask with a mechanical stirrer and a thermometer, and immerse the flask in a bath of ice and salt. Place 306 g. (283 ml.) of acetic anhydride, 300 g. (285 ml.) of glacial acetic acid and 25 g. of p-nitrotoluene in the flask, and add slowly, with stirring, 42 5 ml. of concentrated sulphuric acid. When the temperature has fallen to 5°, introduce 50 g. of A.R. chromic anhydride in small portions at such a rate that the temperature does not rise above 10° continue the stirring for 10 minutes after all the chromium trioxide has been added. Pour the contents of the flask into a 3 litre beaker two-thirds filled with crushed ice and almost fill the beaker with cold water. Filter the solid at the pump and wash it with cold water until the washings are colourless. Suspend the product in 250 ml. of cold 2 per cent, sodium carbonate solution and stir mechanically for 10-15 minutes filter (1), wash with cold water, and finally with 10 ml. of alcohol. Dry in a vacuum desiccator the yield of crude p-nitrobenzal diacetate is 26 g. (2),... 

Method 1. Cool a solution of 33 g. of hydroquinone in 150 ml. of 60 per cent, acetic acid contained in a 600 ml. beaker to below 5° in an ice bath. Dissolve 42 g. of chromic anhydride in 70 ml. of water, and add 30 ml. of glacial acetic acid. By means of a separatory funnel with bent stem and supported over the beaker, add the chromic anhydride solution... 

Chromic(VI) acid Acetic acid, acetic anhydride, acetone, alcohols, alkali metals, ammonia, dimethylformamide, camphor, glycerol, hydrogen sulflde, phosphorus, pyridine, selenium, sulfur, turpentine, flammable liquids in general... 

The anhydride can be made by the Hquid-phase oxidation of acenaphthene [83-32-9] with chromic acid in aqueous sulfuric acid or acetic acid (93). A postoxidation of the cmde oxidation product with hydrogen peroxide or an alkaU hypochlorite is advantageous (94). An alternative Hquid-phase oxidation process involves the reaction of acenaphthene, molten or in alkanoic acid solvent, with oxygen or acid at ca 70—200°C in the presence of Mn resinate or stearate or Co or Mn salts and a bromide. Addition of an aHphatic anhydride accelerates the oxidation (95). 

Cholestanone has been prepared by the oxidation of dihydro-eholesterol with chromic anhydride in acetic acid solution.1 The yield is sometimes diminished as a result of the partial acetylation of the sterol. 

Acetic acid Acetic anhydride Acid mixtures Battery fluids Chloroacetic acid Chlorosulphonic acid Chromic acid Dichloroacetic acid Fluoroboric acid Fluorosilicic acid... 

The close relationship of eegonine to tropine is brought out by its Oxidation products, which when chromic anhydride in acetic acid is the agent used are tropinone, CgHijON (p. 74), tropinic acid, CgHi304N (P- 75) and ecgoninic acid, C HnOgN. The latter crystallises from benzene in colourless needles, m.p. 93°, and has been shown by Willstatter and Bode to W-methylpyrrolidone-2-acetic acid, and this was confirmed by Willstatter and Hollander s synthesis of the acid. 

A solution of 60 g of chromic anhydride in 40 ml of water was added dropwise to a suspension of 60 g of 2-aminomethyl-1 -methyl-5-chloro-3-(o-fluorophenyl)-indole hydrochloride in 600 ml of acetic acid. The mixture was stirred at room temperature overnight. To the reaction mixture was added 1.1 liters of ether and 1 liter of water and then 800 ml of 28% ammonium hydroxide, in small portions. The ethereal layer separated, washed with water, dried, and concentrated under reduced pressure. The residue (51.8 g) was dissolved in 100 ml of ethanol, and 100 ml of 20% ethanollc hydrogen chloride was added to the solution and the mixture was cooled. The precipitate was collected by filtration to yield 46.5 g of 1 -methyl-7-chloro-5-(o-fluorophenyl)-1,3-dihydro-2H-1,4-benzodiazepine-2-one hydrochloride, melt-... 

Q -Hydroxy-3Q (tetrahydropyran-2-yloxy)-2/3-(3Q -tetrahydropyran-2-yloxy-4-phenoxy-trans-1-buten-1 -yl)cyclopent-1Q -yl] -acetaldehyde a-hemiacetal Chromic anhydride Methanesulfonyl isocyanate Acetic acid... 

Cortisone acetate Demegestone Fluocortolone Medrogestone Norethindrone Chromic anhydride Fludiazepam HCI Nimetazepam Sulpro stone Cinchonidine Melphalan Cinnamoyl chloride Cinnarizine... 

When a polymer is soaked in a heavily oxidative chemical liquid, such as chromic anhydride-tetrachloroeth-ane, chromic acid-acetic acid, and chromic acid-sulfuric acid, and treated under suitable conditions, polar groups are introduced on the polymer surface and the surface characteristics are improved [49,50]. The sur-... 

N-Nitroso N phenylglycine, 46, 96 reaction with acetic anhydride to yield 3 phenylsydnone, 46, 96 Nitrosyl chloride, addition to bicyclo-[2 2 ljhepta 2,5 diene, 46, 75 2,4-Nonanedione, 47, 92 Nonane, 1,1,3 trichloro-, 46,104 Nortricyclanol, 46, 74 oxidation by chromic acid, 46, 78 Nortricyclanone, 46, 77 Nortncj clyl acetate 46, 74 frombicyclo[2 2 ljhepta 2,5 dieneand acetic acid, 46, 74 saponification of, 46, 75... 

In a 500-cc. three-necked flask, fitted with a stirrer, thermometer, and dropping funnel, is placed 100 g. (1 mole) of chromic anhydride dissolved in 100 cc. of water, and 100 cc. of glacial acetic acid is added. The a-chlorohydrindene is then admitted through the funnel at such a rate as to keep the temperature at 35-40°, the flask being cooled externally. This addition takes about one and one-half hours, and after it is complete, stirring is... 

In acetic acid, Cr(VI) is present as mixed anhydrides of acetic acid and chromic acid.1... 

Ethyl sulfate Flammable liquids Fluorine Formamide Freon 113 Glycerol Oxidizing materials, water Ammonium nitrate, chromic acid, the halogens, hydrogen peroxide, nitric acid Isolate from everything only lead and nickel resist prolonged attack Iodine, pyridine, sulfur trioxide Aluminum, barium, lithium, samarium, NaK alloy, titanium Acetic anhydride, hypochlorites, chromium(VI) oxide, perchlorates, alkali peroxides, sodium hydride... 

---