Amphiphilic block polymers

Fig. 6.1 Self-organization of amphiphilic block polymers in water (cmc = critical micelle concentration).

Much research has already been devoted in the past couple of years to (i) the immobilization of ATRP active metal catalysts on various supports to allow for catalyst separation and reycycling and (ii) ATRP experiments in pure water as the solvent of choice [62]. A strategy to combine these two demands with an amphiphilic block polymer has recently been presented. Two types of polymeric macroligands where the ligand was covalently linked to the amphiphilic poly(2-oxazo-line)s were prepared. In the case of ruthenium, the triphenylphosphine-functiona-lized poly(2-oxazoline)s described in section 6.2.3.2 were used, whereas in the case of copper as metal, 2,2 -bipyridine functionalized block copolymers were prepared via living cationic polymerization [63] of 2-methyl-2-oxazoline and a bipyridine-functionalized monomer as shown in Scheme 6.8. 

The stability of the polystyrene latex in electrolyte solutions containing an amphiphilic block polymer first decreases because... 

Li, L., Zhong, Y.W., Ma, C.Y., Li, J., Chen, C.K., Zhang, A.J., et al. Honeycrunb-patlemed hybrid films and their template applications via a tunable amphiphilic block polymer/inor-ganic precursor system. Chem. Mater. 21,4977-4983 (2009)... 

Polymeric micelles are colloidal particles formed by the self-assembly of amphiphilic block polymers (at certain hydrophilic/hydrophobic ratio of the blocks... 

The use of amphiphilic block polymers to form micelles and other self-assembled structures is well known and documented (Riess, 2003). Enzymatically induced disassembly of such structures can be accomplished in two ways. Firstly, the hydrophilic and hydrophobic polymer blocks can be separated from each other through introduction of an enzyme-sensitive linker. To this end, polymer blocks joined by ester links (Azagarsamy et al. 

Ge et ai, 2011) and short peptide sequences (Castelletto et al., 2010 de Graaf et ai, 2012) can be prepared that can be cleaved by esterases and proteases. Secondly, a double-hydrophUic block polymer can be used that is converted into a polymer amphiphile by masking the hydrophilicity of one of the polymer blocks. For example, this can be done with a PEG-poly(lysine) block polymer. In the presence of adenosine 5 -triphosphate (ATP), a so-called superamphiphUe is formed, in which the poly(lysine) block is rendered hydrophobic due to the association of multiple ATP molecules to the block and the overall amphiphilic block polymer/ATP associate self-assembles into a micelle. Enzymatic digestion of ATP using a phosphatase recovers the hydrophiUc nature of poly(lysine) and destroys the micelle (Wang ef a/., 2010). 

The multifunctional initiators may be di- and tri-, azo- or peroxy-compounds of defined structure (c.g. 20256) or they may be polymeric azo- or peroxy-compounds where the radical generating functions may be present as side chains 57 or as part of the polymer backbone."58"261 Thus, amphiphilic block copolymers were synthesized using the polymeric initiator 21 formed from the reaction between an a,to-diol and AIBN (Scheme 7.22).26 Some further examples of multifunctional initiators were mentioned in Section 3.3.3.2. It is also possible to produce less well-defined multifunctional initiators containing peroxide functionality from a polymer substrate by autoxidalion or by ozonolysis.-0... 

The formation of polymeric capsules can also be achieved by the cross-linking of self-assembled amphiphilic block copolymers [85]. The hydrophobic section of the polymer in an aqueous solution will tend to aggregate on the interior of the micelle, whereas the hydrophilic ends will form the outer shell of the micelle. If the hydrophilic end is appropriately functionalized, it can be cross-linked, giving a polymeric shell. The overarching concept is shown in Figure 5.10. 

Recently, many studies have focused on self-assembled biodegradable nanoparticles for biomedical and pharmaceutical applications. Nanoparticles fabricated by the self-assembly of amphiphilic block copolymers or hydrophobically modified polymers have been explored as drug carrier systems. In general, these amphiphilic copolymers consisting of hydrophilic and hydrophobic segments are capable of forming polymeric structures in aqueous solutions via hydrophobic interactions. These self-assembled nanoparticles are composed of an inner core of hydrophobic moieties and an outer shell of hydrophilic groups [35, 36]. 

Some other degradable (i.e., nonvinyl-type) polymers have been reported as components for amphiphilic block copolymers. For example, Hsiue reported the synthesis of a block copolymer of poly(2-ethyl oxazoline) and PLA by ROP. They reported the use of ABA-type triblock copolymers as pH-responsive polymer... 

Many kinds of nonbiodegradable vinyl-type hydrophilic polymers were also used in combination with aliphatic polyesters to prepare amphiphilic block copolymers. Two typical examples of the vinyl-polymers used are poly(/V-isopropylacrylamide) (PNIPAAm) [149-152] and poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) [153]. PNIPAAm is well known as a temperature-responsive polymer and has been used in biomedicine to provide smart materials. Temperature-responsive nanoparticles or polymer micelles could be prepared using PNIPAAm-6-PLA block copolymers [149-152]. PMPC is also a well-known biocompatible polymer that suppresses protein adsorption and platelet adhesion, and has been used as the hydrophilic outer shell of polymer micelles consisting of a block copolymer of PMPC -co-PLA [153]. Many other vinyl-type polymers used for PLA-based amphiphilic block copolymers were also introduced in a recent review [16]. 

Fig. 30 Types of nanocarriers for drug delivery, (a) Polymeric nanoparticles polymeric nanoparticles in which drugs are conjugated to or encapsulated in polymers, (b) Polymeric micelles amphiphilic block copolymers that form nanosized core-shell structures in aqueous solution. The hydrophobic core region serves as a reservoir for hydrophobic drugs, whereas hydrophilic shell region stabilizes the hydrophobic core and renders the polymer water-soluble.

A special class ofblock copolymers with blocks of very different polarity is known as amphiphilic (Figure 10.1). In general, the word amphiphile is used to describe molecules that stabilize the oil-water interface (e.g., surfactants). To a certain extent, amphiphilic block copolymers allow the generalization of amphi-philicity. This means that molecules can be designed that stabilize not only the oil-water interface but any interface between different materials with different cohesion energies or surface tensions (e.g., water-gas, oil-gas, polymer-metal, or polymer-polymerinterfaces). This approach is straightforward, since the wide variability of the chemical structure of polymers allows fine and specific adjustment of both polymer parts to any particular stabilization problem. 

Goldraich M, Talmon Y (2000) Direct-imaging cryo-transmission electron microscopy in the study of colloids and polymer solutions. In Alexandridis P, Lindman B (eds) Amphiphilic block copolymers self assembly and applications. Elsevier, Amsterdam... 

Fig. 6.3 Different types of micelles and micelle analogous structures a) amphiphilic block copolymers, b) star-like polymers with a hyperbranched core, c) polysoaps.

A promising strategy towards stable and catalyticaUy active metal colloids is their preparation inside the core of micelles formed by amphiphilic block copolymers. This strategy offers a number of advantages (i) micelles represent a nano-structured environment which can be exactly tailored by block copolymer synthesis (ii) polymers act as effective steric stabilizer ]36] (iii) metal leaching might be avoided (iv) micelles allow control over particle size, size distribution and particle solubility [37] and (v) micelles are also supposed to effect catalytic activity and selectivity [38]. 

A second approach that should allow for catalyst recycling is based on amphiphilic block copolymers, where the catalyst is covalently bound to the hydrophobic block. The groups of G. Oehme in Rostock and O. Nuyken in Munich are working on such systems that are sometimes described as metallosurfactants. The appending polymers without the catalyst are called macroligands or amphiphihzed ligands [4, 50]. 

Amphiphilic polymers studied thus far for this purpose can be broadly classified into amphiphilic block copol5mers and amphiphilic homopolymers. We will discuss both of these types of linear polymer architectures. Another interesting class of polymeric amphiphiles is based on branched architectures, known as dendrimers. The most interesting aspect of dendrimers is that their molecular weight and polydisper-sity can be precisely controlled hence, these systems have the potential to be moved... 

Thus, the PEO segment actually becomes hydrophobic at higher temperatures. This temperature-dependent change converts the amphiphilic block copolymer to a water-insoluble hydrophobic polymer (Topp et al. 1997 Chung et al. 2000). The temperature at which the polymer exhibits this transition is called its lower critical solution temperature (LCST). In addition to PEO, substituted poly(A -isopropyl acrylamide) (PNIPAM Chart 2.1) exhibits temperature sensitivity, where the LCST can be tuned by varying the alkyl fimctionahty. The guest encapsulation combined with the temperature-sensitive precipitation of the polymers has been exploited to sequester and separate guest molecules from aqueous solutions (Fig. 2.4). 

Similar to micellar assemblies in water, reverse micelles have also been utilized to bring about nonspecific binding interactions in organic solvents. Akiyoshi et al. (2002) have synthesized an amphiphilic block copolymer containing PEO and an amylase chain as receptor for methyl orange (MO Chart 2.2). Amylases are insoluble and methoxy-PEO (MPEO) is soluble in chloroform. Hence, an MPEO-amylase block copolymer forms reverse micelles in chloroform. Akiyoshi et al. established the capability of the buried receptors to extract the complementary analyte by studying the ultraviolet visible (UV-vis) spectra. A solution of polymer was shaken... 

---