Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amoco Production

All of the commercial polymers are linear and although most have regular structures they are all, at least for practical intents and purposes, amorphous. The high in-chain aromaticity leads to high values of the Tg, the Amoco product Udel having a of about 190°C whilst the ICI polymer has an even higher value of about 230°C. The Amoco materials have a condary transition at -100°C and that of the ICI polymer is -70°C. Typical M values are about 23 000. [Pg.599]

FIGURE 6.2 Interfacial tension imprisons residual oil in rock, preventing its displacement by water. Without interfacial tension, oil flows freely, leaving no residual portion in the rock. Courtesy, Amoco Production Company. [Pg.95]

We would like to thank Amoco Production Company for funding this work and for allowing its publication. We would also would like to acknowledge Dr. Jeffrey T. Cline of Amoco for providing the marble samples. [Pg.574]

Corrosion of steel during oil well acidizing or acid pickling treatments can be controlled effectively and economically with organic corrosion inhibitors. These additives interact with the steel surface to form an adherent barrier, the nature of which depends on the additives physicochemical properties. Work to date has established that acetylenic alcohols chemisorb and subsequently polymerize on steel surfaces (1-5"). a,/MJnsaturated aldehydes and a-alkenyl-phenones appear to behave in a similar manner (6j7"). The nature of Current address Amoco Production Company, Tulsa, OK... [Pg.635]

Alberta Research Council, 327 American Cyanamid Company, 102 Amoco Production Company, 560 Baker Performance Chemicals, 577 Chung Yuan Christian University, 596 Dowell Schlumberger, 608,637 Exxon Chemical Company (ECTD), 366 Halliburton Services, 55,660 Heriot-Watt University, 520 ICI Chemicals and Polymers Ltd., 520 IMOD Processes Ltd., 520 Institut Charles Sadron, CRM-EAHP, CNRS-ULP, 111,124 Institut Fran9ais du Pdtrole, 224,276,410 Mayco Wellchem, 622 Mobile Research and Development Corporation, 137... [Pg.679]

Cold-Bed Adsorption Amoco Production Company Claus tall gas Raises overall sulfur recovery to 99-99.3%, <1500 ppmv sulfur In treated gas. No COS/CS2 conversion... [Pg.24]

Current address AMOCO Production Company, Tulsa, OK... [Pg.361]

Support of the Department of Energy, National Science Foundation (CPE-82-01216), Amoco Production, Chevron Oil Field Research, Exxon Research and Engineering, Gulf Research and Development, Marathon Oil, Shell Developmmt, Standard Oil of Ohio, Texaco, and Union Oil, is gratefully acknowledged. [Pg.289]

I thank Jack D Cutter for having the resolution to approve installation of this newly designed and untried degasser unit in Salt Creek. I also thank Amoco Production Co for permission to publish (his paper... [Pg.130]

Finally, financial support that made it possible for many foreign speakers to participate in the symposium is most gratefiilly acknowledged. Substantial contributions were made by the following Amoco Production Company, Arco Oil and Gas Company, Conoco Inc., Consolidation Coal Company, Mobil Research and Development Corporation, Unocal Corporation, and the American Chemical Society Petroleum Research Fund. [Pg.7]

A separate Oxygen Transport Membrane (OTM) Syngas Alliance was formed in 1997 and includes Amoco Production Company, British Petroleum, Praxair, Statoil, Foster Wheeler and Sasol Technology. This alliance is developing ceramic membrane technology that will economically convert natural gas to synthesis gas190. [Pg.124]

The authors are grateful for the support that they have received for this work from the Amoco Production Company. [Pg.49]

This research was supported by grants from Amoco Production... [Pg.279]

This work was supported by grants from Shell Development Company, Exxon Production Research Company, Amoco Production Company, and Gulf Research and Development Company. K. Raney thanks Cities Service Company for personal financial support during the period this work was performed. [Pg.222]

Two crude oils were used o e was a California crude donatedQby Shell with density of 0.953 gm/cm and viscosity of 24 poise at 25 C, the other was a St. Lina (Canada) crude donated by Amoco Production Company with a density of 0.987 gm/cm and viscosity of 164 poise at 25°C. All of the experiments described here were run at 60% volume fraction of oil. [Pg.472]

Present address AMOCO Production Co., Tulsa, Okla. [Pg.122]

Winland, H. D. 1972. Internal document from Amoco Production Company. [Pg.390]

Current address Amoco Production Company, Research and Development Center, Tulsa, OK 74102... [Pg.151]

Financial support of these studies by the Amoco Production Company... [Pg.163]

Amoco Production Company, 151 Aqualon Corporation, 89, 343 BFGoodrich Company, 113 Bayer AG, 175... [Pg.553]

Melting temperature K Range (depending on composition) For Amoco products 543-593 585 (21)... [Pg.208]

American Cyanamid Co., 3) Amoco Production Co., 4) Atlantic Richfield Co., 5) BASF-Wyandotte Co., 6) British Petroleum Co., England, 7) Calgon Corp., 8) Cities Service Oil Co., 9) Continental Oil Co., 10) Ethyl Corp., 11) Exxon Production Research Co., 12)... [Pg.556]


See other pages where Amoco Production is mentioned: [Pg.195]    [Pg.306]    [Pg.72]    [Pg.96]    [Pg.65]    [Pg.562]    [Pg.72]    [Pg.125]    [Pg.306]    [Pg.6]    [Pg.189]    [Pg.131]    [Pg.51]    [Pg.154]    [Pg.497]    [Pg.40]    [Pg.385]    [Pg.407]    [Pg.208]    [Pg.209]    [Pg.753]    [Pg.209]    [Pg.10]    [Pg.71]   
See also in sourсe #XX -- [ Pg.154 ]




SEARCH



AMOCO FOAM PRODUCTS

Amoco

Amoco Performance Products, Inc

© 2024 chempedia.info