Ammonium vanadic sulphate

As(V) by the addition of aqueous iodine, followed by conversion to molybdoarsenate and reduction to molybdenum blue by boiling under reflux with a sulphuric acid solution of ammonium vanadate and hydrazine sulphate. The method is sufficiently sensitive to determine down to 3 fig of Lewisite per millilitre of sample. 

The estimation of a vanadate solution by direct titration with ferrous sulphate or ferrous ammonium sulphate solution has been worked out, and is found to be specially applicable to the analysis of vanadium alloys. The vanadate is again reduced to tire tetravalent state by the ferrous salt, the end point being obtained by the use of potassium ferricyanide as internal indicator alternatively, a known excess of the ferrous salt solution is added to the vanadate, the amount unused... 

Electrometric Methods have been applied for the estimation of vanadium alone and alloyed with other metals, e.g. iron, chromium, uranium. The reduced solution is either gradually oxidised by means of a suitable oxidising agent (potassium permanganate, ammonium persulphate, nitric acid), or the vanadate solution is gradually reduced with ferrous sulphate solution the changes in the E.M.F. of a suitable cell indicate the end point.8... 

Colorimetric Methods are used only for the estimation of very small percentages of vanadium, e.g. in vanadium steels and alloys. The most important depend on the intensity of the reddish-brown colour produced by the action of hydrogen peroxide on an acid vanadate solution.3 If chromium is present, an equal amount must be introduced into the standard vanadium solution under the same conditions of temperature, acid concentration, etc. Phosphoric acid is added to destroy any yellow colour due to ferric iron, and either hydrofluoric acid or ammonium fluoride to destroy any colour produced by titanium.4 A colorimetric method for the simultaneous estimation of small quantities of titanium and vanadium has also been worked out.5 Other colorimetric processes are based on (a) the formation of a yellow to black coloration, due to aniline black, in the presence of aniline hydrochloride and potassium chlorate or other oxidising agent,6 and (b) the orange coloration finally produced when an acid solution of a vanadate is brought into contact with strychnine sulphate.7... 

The carbonates, sulphates, and borates are decomposed. The sulphides of the alkalies and alkaline earths are decomposed while the sulphides of arsenic, antimony, molybdenum, zinc, cadmium, tin, iron, lead, copper, mercury, and palladium are not attacked. Cobalt sulphate is not attacked, while the sulphates of the alkalies and alkaline earths are attacked and dissolved. Alkali tungstates, ammonium arsenite and arsenate, copper arsenite, ammonium magnesium arsenate, ammonium molybdate and vanadate, potassium cyanide and ferrocyanide are decomposed. Paraffin is not attacked shellac, gum arabic, gum tragacanth, copal, etc., are decomposed. Celluloid is slowly attacked. Silk paper, gun cotton, gelatin, parchment are dissolved. M. Meslans 22 has studied the esterification of alcohol by hydrofluoric acid. 

One of the simplest methods of preparation is by decomposition of a thermally unstable compound. The nitrate or chloride is often preferred, sulphates tend to decompose at higher temperatures. Where the presence of residual traces of anion is to be avoided, the metal salts of organic acids are particularly useful. Formates, oxalates, acetates etc, decompose at low temperatures and often reduce the metal at the same time. For the preparation of catalysts from anions, the ammonium salt is frequently used. Metallic salts of complex acids can be used as a source of metal oxide mixtures. Decomposition of the appropriate chromate, tungstate, molybdate or vanadate will produce the mixed oxide. 

---