Ammonium carbonate sulfate

In the commonly used Welland process, calcium cyanamide, made from calcium carbonate, is converted to cyanamide by reaction with carbon dioxide and water. Dicyandiamide is fused with ammonium nitrate to form guanidine nitrate. Dehydration with 96% sulfuric acid gives nitroguanidine which is precipitated by dilution. In the aqueous fusion process, calcium cyanamide is fused with ammonium nitrate ia the presence of some water. The calcium nitrate produced is removed by precipitation with ammonium carbonate or carbon dioxide. The filtrate contains the guanidine nitrate that is recovered by vacuum evaporation and converted to nitroguanidine. Both operations can be mn on a continuous basis (see Cyanamides). In the Marquerol and Loriette process, nitroguanidine is obtained directly ia about 90% yield from dicyandiamide by reaction with sulfuric acid to form guanidine sulfate followed by direct nitration with nitric acid (169—172). 

Synthetic manganese carbonate is made from a water-soluble Mn (IT) salt, usually the sulfate, by precipitation with an alkafl or ammonium carbonate. The desired degree of product purity determines the quaUty of manganese sulfate and the form of carbonate to be used. For electronic-grade material, where the content of K O and Na20 cannot exceed 0.1% each, the MnSO is specially prepared from manganese metal, and ammonium bicarbonate is used (26) (see Electronic materials). After precipitation, the MnCO is filtered, washed free of excess carbonate, and then, to avoid undesirable oxidation by O2, dried carefljlly at a maximum temperature of 120°C. 

Some companies have used the Merseburg process to manufacture ammonium sulfate from gypsum, but the process is only economically attractive where sulfur is unavailable or very expensive (32), and is thus not used in the United States. Ammonium carbonate, formed by the reaction of ammonia and carbon dioxide in an aqueous medium, reacts with suspended, finely ground gypsum. Insoluble calcium carbonate and an ammonium sulfate solution are formed. 

Carbonates. Basic zirconium carbonate [37356-18-6] is produced in a two-step process in which zirconium is precipitated as a basic sulfate from an oxychloride solution. The carbonate is formed by an exchange reaction between a water slurry of basic zirconium sulfate and sodium carbonate or ammonium carbonate at 80°C (203). The particulate product is easily filtered. Freshly precipitated zirconium hydroxide, dispersed in water under carbon dioxide in a pressure vessel at ca 200—300 kPa (2—3 atm), absorbs carbon dioxide to form the basic zirconium carbonate (204). Washed free of other anions, it can be dissolved in organic acids such as lactic, acetic, citric, oxaUc, and tartaric to form zirconium oxy salts of these acids. 

Allied-Signal Process. Cyclohexanone [108-94-1] is produced in 98% yield at 95% conversion by liquid-phase catal57tic hydrogenation of phenol. Hydroxylamine sulfate is produced in aqueous solution by the conventional Raschig process, wherein NO from the catalytic air oxidation of ammonia is absorbed in ammonium carbonate solution as ammonium nitrite (eq. 1). The latter is reduced with sulfur dioxide to hydroxylamine disulfonate (eq. 2), which is hydrolyzed to acidic hydroxylamine sulfate solution (eq. 3). 

Ammonium cyanide may be prepared in solution by passing hydrogen cyanide into aqueous ammonia at low temperatures. It may also be prepared from barium cyanide and ammonium sulfate, or calcium cyanide with ammonium carbonate. It may be prepared in the dry state by gentiy heating a mixture of potassium cyanide or ferrocyanide and ammonium chloride, and condensing the vapor in a cooled receiver. Ammonium cyanide is soluble in water or alcohol. The vapor above soHd NH CN contains free NH and HCN, a very toxic mixture. 

Ammonium acetate Ammonium adipate Ammonium benzoate Ammonium bicarbonate Ammonium biflluoride Ammonium binoxalate Ammonium bisulfate Ammonium bitartrate Ammonium tetraborate Ammonium bromide Ammonium carbonate Ammonium chloride Ammonium citrate Ammonium diclnomate Ammonium fluoride Ammonium fluorosilicate Ammonium gluconate Ammonium iodide Ammonium molybdate Ammonium nitrate Ammonium oxalate Ammonium perchlorate Ammonium picrate Ammonium polysulfide Ammonium salicylate Ammonium stearate Ammonium sulfate Ammonium sulfide (hydrosulfide) Ammonium tartrate Ammonium tliiocyanate Ammonium thiosulfate... 

A) A solution of (SMI (320 mg) in trifluoroacetic acid (7 ml) was kept under nitrogen at room temperature for 15 minutes. Ether (100 ml) was added and the precipitate filtered, washed thoroughly with ether and dried. This material (280 mg) was added to concentrated sulfuric acid (20 ml), cooled at -20°C. The solution was kept in the dry ice-acetone bath at -20°C for 75 minutes. The sulfuric acid solution was poured into ice water (80 ml). The precipitate was centrifuged, resuspended in ice water (30 ml) and 4N sodium hydroxide was added until a clear solution was obtained. After reacidification to pH 4 with dilute sulfuric acid, the precipitate formed was centrifuged, washed twice with ice water and dried. Yield 155 mg. Chromatograph of DEAE Sephadex (with ammonium carbonate buffer) yielded the desired octa-peptide sulfate ester 30 mg. 

Calcium sulfate cannot be removed by HC1. Suitable solvents include neutralized (pH 6.5) tetrasodium EDTA at 200 to 300 °F, together with ammonium carbonate EDTA/organic acids... 

Merseburg A process for making ammonium sulfate fertilizer from gypsum. The gypsum is slurried with water and ammonium carbonate solution added. Calcium carbonate precipitates and is removed, any excess of ammonium carbonate is neutralized with sulfuric acid, and the solution is concentrated until it crystallizes ... 

Ammonium carbonate is obtained by passing carbon dioxide into aqueous ammonia solution in a column or tower. Ammonia, carbon dioxide and water vapor are distilled and the vapors condensed into a sobd crystaUine mass. It also may be prepared by subliming a mixture of ammonium sulfate and calcium carbonate. 

Ammonium sulfate also is manufactured from gypsum salt, CaS04 2H20. Finely divided gypsum is added to ammonium carbonate solution. Calcium carbonate precipitates out, leaving ammonium sulfate in solution. 

Synonym Ammonia Water Amfbnioformaldehyde Ammonium Acetate Ammonium Acid Fluoride Ammonium Amidosulfonate Ammonium Amidosulphate Ammonium Benzoate Ammonium Bicarbonate Ammonium Bichromate Ammonium Bifluoride Ammonium Carbonate Ammonium Chloride Ammonium Citrate Ammonium Citrate, Dibasic Ammonium Decaborate Octahydrate Ammonium Dichromate Ammonium Disulfate-Nickelate (II) Ammonium Ferric Citrate Ammonium Ferric Oxalate Trihydrate Ammonium Ferrous Sulfate Ammonium Fluoride Ammonium Fluosilicate Ammonium Formate Ammonium Gluconate Ammonium Hydrogen Carbonate Ammonium Hydrogen Fluoride Ammonium Hydrogen Sulfide Solution Ammonium Hydroxide Ammonium Hypo Ammonium Hyposulfite Ammonium Iodide Ammonium Iron Sulfate Ammonium Lactate Ammonium Lactate Syrup Ammonium Lauryl Sulfate Ammonium Molybdate Ammonium Muriate Ammonium Nickel Sulfate Ammonium Nitrate Ammonium Nitrate-Urea Solution Ammonium Oleate... 

Thus, after a good deal of complicated aqueous chemistry, we have separated Cu, Ni, and Co ions from one another. Reduction of the ions to the metals is described in Section 17.6. A more recent version of the ammonia leach process uses an ammonia/ammonium carbonate, rather than sulfate, buffer solution. 

References Mellor, IX, 90 Read, J. Ind. Eng. Chetn., 20,97(1928). Additional Exercises Purification of iodine preparation of ammonium carbonate from calcium carbonate and ammonium chloride mercuric chloride from mercuric sulfate and sodium chloride. 

Salts of semicarbazide have been prepared by the action of potassium cyanate on hydrazine sulfate 1 by the action of hydrazine hydrate on urea 2 by heating hydrazine ammonium carbonate 3 bv the reduction of nitrourea with zinc dust and hydrover. 27, 31 (1894). 

By the double decomposition of calcium nitrate and ammonium carbonate (or sulfate) in solution Ca(NO,), + (NH4),CO, - CaCO, + 2NH4NO,... 

Sodium rhodizonate Strontium (II), Sr2 Ammonium carbonate Dilute sulfuric acid Saturated calcium sulfate Potassium chromate Ammonium oxalate... 

The sulfuric acid solution was poured into ice water (80 ml). The precipitate was centrifuged, resuspended in ice water (30 ml) and 4N sodium hydroxide was added until a clear solution was obtained. After reacidification to pH 4 with dilute sulfuric acid, the precipitate formed was centrifuged, washed twice with ice water and dried. Yield 155 mg. Chromatograph of DEAE Sephadex (with ammonium carbonate buffer) yielded the desired octapeptide sulfate ester 30 mg. 

Ammonium carbonate, saturated solution, 30.0ml Copper sulfate, 0.6g Potassium ferricyanide, 1.5 g... 

A few companies have used the Merseburg process to recover sulfur values from gypsum as ammonium sulfate. This process is based on the reaction of gypsum with ammonium carbonate. 

Hydroxylamine sulfate is usually prepared in a modified Raschig method that starts with air oxidation of ammonia. The nitrogen oxides are reacted with ammonium carbonate to produce ammonium nitrite and carbon dioxide [see Eq. 21.3)]. The ammonium nitrite solution then reacts with sulfur dioxide to give hydroxylamine diammonium sulfate, which is hydrolyzed to hydroxylamine sulfate and by- product ammonium sulfate46,266. 

---