Ammonia thermodynamics

The last isomerization is remarkable in that the triple bond can shift through a long carbon chain to the terminus, where it is fixed as the (kinetically) stable acetylide. The reagent is a solution of potassium diami no-propyl amide in 1,3-di-aminopropane. In some cases alkali metal amides in liquid ammonia car also bring about "contra-thermodynamic" isomerizations the reactions are successful only if the triple bond is in the 2-position. 

Chemica.1 Properties. With few exceptions, SF is chemically inert at ambient temperature and atmospheric pressure. Thermodynamically SF is unstable and should react with many materials, including water, but these reactions are kineticaHy impeded by the fluorine shielding the sulfur. Sulfur hexafluoride does not react with alkah hydroxides, ammonia, or strong acids. 

Ethyleneimine (El) and its two most important derivatives, 2-methyla2iridine [75-55-8] (propyleneimine) (PI) and l-(2-hydroxyethyl)a2iridine [1072-52-2] (HEA) are colodess Hquids. They are miscible ia all proportions with water and the majority of organic solvents. Ethyleneimine is not miscible with concentrated aqueous NaOH solutions (>17% by weight) (24). Ethyleneimine has an odor similar to ammonia and is detectable only at concentrations >2 ppm. The physical properties of ethyleneimine and the derivatives mentioned are given ia Table 1. Thermodynamic data can be found ia the Hterature (32). 

Ma.nufa.cture. Nickel carbonyl can be prepared by the direct combination of carbon monoxide and metallic nickel (77). The presence of sulfur, the surface area, and the surface activity of the nickel affect the formation of nickel carbonyl (78). The thermodynamics of formation and reaction are documented (79). Two commercial processes are used for large-scale production (80). An atmospheric method, whereby carbon monoxide is passed over nickel sulfide and freshly reduced nickel metal, is used in the United Kingdom to produce pure nickel carbonyl (81). The second method, used in Canada, involves high pressure CO in the formation of iron and nickel carbonyls the two are separated by distillation (81). Very high pressure CO is required for the formation of cobalt carbonyl and a method has been described where the mixed carbonyls are scmbbed with ammonia or an amine and the cobalt is extracted as the ammine carbonyl (82). A discontinued commercial process in the United States involved the reaction of carbon monoxide with nickel sulfate solution. 

Ammonia is readily absorbed ia water to make ammonia liquor. Figure 2 summarizes the vapor—Hquid equiUbria of aqueous ammonia solutions and Figure 3 shows the solution vapor pressures. Additional thermodynamic properties may be found ia the Hterature (1,2). Considerable heat is evolved duriag the solution of ammonia ia water approximately 2180 kJ (520 kcal) of heat is evolved upon the dissolution of 1 kg of ammonia gas. 

Thermodynamics and Kinetics. Ammonia is synthesized by the reversible reaction of hydrogen and nitrogen. 

Catalytic hydrogenation of the 14—15 double bond from the face opposite to the C18 substituent yields (196). Compound (196) contains the natural steroid stereochemistry around the D-ring. A metal-ammonia reduction of (196) forms the most stable product (197) thermodynamically. When R is equal to methyl, this process comprises an efficient total synthesis of estradiol methyl ester. Birch reduction of the A-ring of (197) followed by acid hydrolysis of the resultant enol ether allows access into the 19-norsteroids (198) (204). 

Copper Hydroxide. Copper(II) hydroxide [20427-59-2] Cu(OH)2, produced by reaction of a copper salt solution and sodium hydroxide, is a blue, gelatinous, voluminous precipitate of limited stabiUty. The thermodynamically unstable copper hydroxide can be kiaetically stabilized by a suitable production method. Usually ammonia or phosphates ate iacorporated iato the hydroxide to produce a color-stable product. The ammonia processed copper hydroxide (16—19) is almost stoichiometric and copper content as high as 64% is not uncommon. The phosphate produced material (20,21) is lower ia copper (57—59%) and has a finer particle size and higher surface area than the ammonia processed hydroxide. Other methods of production generally rely on the formation of an iasoluble copper precursor prior to the formation of the hydroxide (22—26). 

The increasing ranges of pressure and temperature of interest to technology for an ever-increasing number of substances would necessitate additional tables in this subsection as well as in the subsec tion Thermodynamic Properties. Space restrictions preclude this. Hence, in the present revision, an attempt was made to update the fluid-compressibihty tables for selected fluids and to omit tables for other fluids. The reader is thus referred to the fourth edition for tables on miscellaneous gases at 0°C, acetylene, ammonia, ethane, ethylene, hydrogen-nitrogen mixtures, and methyl chloride. The reader is also... 

In order to synthesize an optimal MEN for intercepting the off-gas condensate, we constnict the pinch diagram as shown in Fig. 4.9. Since the three MSA s lie completely to the left of the rich stream, they are all thermodynamically feasible. Hence, we choose the one with the least cost ( /kg NH3 removed) namely the resin. The annual operating cost for removing ammonia using the resin is ... 

Lithium-ammonia reductions of most steroidal enones of interest create one or two new asymmetric centers. Such reductions are found to be highly stereoselective and this stereoselectivity constitutes the great utility of the reaction. For conjugated enones of the normal steroid series, the thermodynamically most stable products are formed predominantly and perhaps exclusively. Thus the following configurations are favored 5a, 8/ , 9a, and in certain cases 14a (see page 35). Starr has listed numerous examples illustrating these facts and Smith " and Barton have tabulated similar data. 

A study of the lithium-ammonia reduction of 14-en-16-ones would extend our understanding of the configuration favored at C-14 in metal-ammonia reductions. Although several simple 14-en-16-ones are known, their reduction by lithium and ammonia apparently has not been described in the literature. Lithium-ammonia reduction of A-nortestosterone, a compound that structurally is somewhat analogous to a 14-en-16-one, affords roughly equal amounts of the 5a- and 5 -dihydro-A-nortestosterones. " This finding was interpreted as indicating that there is little difference in thermodynamic stability between the two stereoisomeric products. 

Huffman found that treatment of cholan-12-one (65b) with lithium and ammonia for 2 hours followed by addition of propanol gives 40 % of a pinacol together with 48.5 % of 12-ols in which the ratio of 12j5 12a is 19 1. This predominance of the 12 -ol was interpreted in terms of slow formation of a dianion of type (62) followed by its equilibration to the thermodynamically most stable configuration, i.e. one which affords the 12j5-ol upon protonation. An alternative explanation is that reduction in the presence of methanol involves protonation of a ketyl such as (61) by methanol, whereas in the absence of methanol reduction proceeds via the dianion (62) which is protonated on... 

As first demonstrated by Stork,the metal enolate formed by metal-ammoni reduction of a conjugated enone or a ketol acetate can be alkylated in liquic ammonia. The reductive alkylation reaction is synthetically useful since ii permits alkylation of a ketone at the a-position other than the one at whicf thermodynamically controlled enolate salt formation occurs. Direct methyl-ation of 5a-androstan-17-ol-3-one occurs at C-2 whereas reductive methyl-... 

In section V-A it has been pointed out that catalytic reduction of conjugated enones is usually a good method for the preparation of p- or y-labeled ketones. To overcome certain stereochemical problems, however, it is occasionally necessary to use the lithium-ammonia reduction. In this case deuteration takes place at the / -carbon and generally leads to the thermodynamically more stable product (see chapter 1). 

A useful alternate procedure which allows the generation and alkylation of the less stable enolate anion has been reported by Stork.This method takes advantage of the fact that the thermodynamically less stable enolate anion formed in the lithium ammonia reduction of a conjugated enone... 

---