Amines dimethyl sulfoxide

TRICHLORACETIC ACID (76-03-9) C2HCI3O2 Combustible liquid [flash point (solid material) >230°F/>110°C]. Generally stable if moisture is not present in elevated temperatures, this material, combined with H2O forms HCl and deadly phosgene gases. The aqueous solution is a strong acid. Incompatible wifli sulfuric acid, bases, ammonia, amines, dimethyl sulfoxide, iso-... 

Sodium Borohydride. Sodium borohydride [16940-66-2] is a thermally stable, white crystalline soHd that decomposes in vacuo above 400°C. The heat of formation is —192 kJ/mol (—45.9 kcal/mol). NaBH is hygroscopic and absorbs water rapidly from moist air to form a dihydrate that decomposes slowly to sodium metaborate and hydrogen. It is soluble in many solvents including water, alcohols, Hquid ammonia and amines, glycol ethers, and dimethyl sulfoxide. 

Lithium Acetylide. Lithium acetyhde—ethylenediamine complex [50475-76-8], LiCM7H -112X01120112X112, is obtained as colodess-to-light-tan, free-flowing crystals from the reaction of /V-lithoethylenediamine and acetylene in an appropriate solvent (131). The complex decomposes slowly above 40°O to lithium carbide and ethylenediamine. Lithium acetyhde—ethylenediamine is very soluble in primary amines, ethylenediamine, and dimethyl sulfoxide. It is slightly soluble in ether, THF, and secondary and tertiary amines, and is insoluble in hydrocarbons. 

Trilialophenols can be converted to poly(dihaloph.enylene oxide)s by a reaction that resembles radical-initiated displacement polymerization. In one procedure, either a copper or silver complex of the phenol is heated to produce a branched product (50). In another procedure, a catalytic quantity of an oxidizing agent and the dry sodium salt in dimethyl sulfoxide produces linear poly(2,6-dichloro-l,4-polyphenylene oxide) (51). The polymer can also be prepared by direct oxidation with a copper—amine catalyst, although branching in the ortho positions is indicated by chlorine analyses (52). 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Zirconium tetrachloride is instantly hydrolyzed in water to zirconium oxide dichloride octahydrate [13520-92-8]. Zirconium tetrachloride exchanges chlorine for 0x0 bonds in the reaction with hydroxylic ligands, forming alkoxides from alcohols (see Alkoxides, METAl). Zirconium tetrachloride combines with many Lewis bases such as dimethyl sulfoxide, phosphoms oxychloride and amines including ammonia, ethers, and ketones. The zirconium organometalLic compounds ate all derived from zirconium tetrachloride. 

Many other examples are known of non-selective reactions of halo groups in pyridopyridazines with amines, alkoxides, sulfur nucleophiles such as hydrosulfide and thiolate ions, or thiourea, hydrazine(s), cyanide ion and dimethyl sulfoxide, or on catalytic reduction. 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

Charge-transfer complexes with pyrimidine and purine bases as well as with solvents like hexa-methylphosphoramide and dimethyl sulfoxide are reported in Ref 66. The action of aromatic amines (primary, secondary, or tertiary) resulted in fume-offs or unidentifiable tars, in all cases purple or red colors developed prior to more violent reactions (Ref 66)... 

Kemp and coworkers employed the pulse radiolysis technique to study the radiolysis of liquid dimethyl sulfoxide (DMSO) with several amines as solutes [triphenylamine, and N, A, A, N -tetramethyl-p-phenylenediamine (TMPD)]. The radiolysis led to the formation of transient, intense absorptions closely resembling those of the corresponding amine radical cations. Pulse radiolysis studies determine only the product Ge, where G is the radiolytic yield and e is the molar absorption. Michaelis and coworkers measured e for TMPD as 1.19 X 10 m s and from this a G value of 1.7 is obtained for TMPD in DMSO. The insensitivity of the yield to the addition of electron scavenger (N2O) and excited triplet state scavenger (naphthalene) proved that this absorption spectrum belonged to the cation. 

The synthesis of new thieno-annelated 6aA4-thia-l,6-diazapentalenes 33 from iro-thiazolium-5-methyl and 5-methylene groups with dicyclohexyl amines in methanol or dimethyl sulfoxide has been achieved (Scheme 82) <1996MOL142>. 

Solvated electrons are known to be formed in amines, amides, dimethyl sulfoxide, and many other liquids that will not be discussed here. Note that, except for the yield and time scale of observation, the production of es itself is not related to polarity. Thus, the es absorption spectrum has indeed been observed in nonpolar liquids both at low temperatures and room temperature (Taub and... 

Bajugam and Flitsch [217] have described the synthesis of glycosylamines from mono-, di-, and trisaccharides by direct microwave-assisted Kochetkov amination (Scheme 6.110). The reaction was found to be effective with just a fivefold excess (w/w) of ammonium carbonate with respect to the sugar, as compared to the 40-or 50-fold excess needed under thermal conditions. All transformations were completed within 90 min in dimethyl sulfoxide as solvent, maintaining the vessel temperature at an apparent 40 °C using the heating-while-cooling technique (see Section 2.5.3). 

For the preparation of the triazine membranes, the entire solid support (cellulose or polypropylene membrane) was treated with a 5 m solution of the corresponding amine in l-methyl-2-pyrrolidinone (NMP) and a 1 m solution of cesium phenolate in dimethyl sulfoxide (2 p L of each at one spot) and subsequently heated in a domestic microwave oven for 3 min. After washing the support successively with... 

Lakner et al. carried out studies on new mesoionic heterocyclic structures <2005TL5325> (Scheme 6). These authors found that although the salt 68 is stable at 100-120 °C (in dimethyl sulfoxide (DMSO)) in the presence of various amines, it easily undergoes ring opening upon microwave irradiation under the same reaction conditions to yield amides 69. 

The chlorinated silica gel suspended in diethyl ether, dimethyl sulfoxide, or dioxane will also react with diamine or amino compounds. After being washed in an excess of amine and HC1, and then dried under vacuum, the final stationary phase materials are obtained ... 

Several reports have appeared on the effect of additives on the Pauson-Khand reaction employing an alkyne-Co2(CO)6 complex. For example, addition of phosphine oxide improves the yields of cyclopentenones 119], while addition of dimethyl sulfoxide accelerates the reaction considerably [20]. Furthermore, it has been reported that the Pauson-Khand reaction proceeds even at room temperature when a tertiary amine M-oxide, such as trimethylamine M-oxide or N-methylmorpholine M-oxide, is added to the alkyne-Co2(CO)6 complex in the presence of alkenes [21]. These results suggest that in the Pauson-Khand reaction generation of coordinatively unsaturated cobalt species by the attack of oxides on the carbonyl ligand of the alkyne-Co2(CO)6 complex [22] is the key step. With this knowledge in mind, we examined further the effect of various other additives on the reaction to obtain information on the mechanism of this rearrangement. 

---