Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Allylic syntheses with

Allylic syntheses with 2-ethylenemesitoates via 2-ethyleneorganolithium compds. 3-Ethylenealcohols from ketones... [Pg.159]

Diallylsulfonium salts undergo intramolecular allylic rearrangement with strong bases to yield 1,5-dienes after reductive desulfurization. The straight-chain 1,5-dienes may be obtained by double sulfur extrusion with concomitant allylic rearrangements from diallyl disulfides. The first step is achieved with phosphines or phosphites, the second with benzyne. This procedure is especially suitable for the synthesis of acid sensitive olefins and has been used in oligoisoprene synthesis (G.M. Blackburn, 1969). [Pg.39]

Many examples of stereospecific allylation consistent with the above mechanism have been reported. As one example, the regioselective and highly diastereoselective allylation of the lactone 17 with the optically active allylic phosphate 16 proceeded with no appreciable racemization of the allylic part to give the lactones l8 and 19, and the reaction has been used for the synthesis of a polypropionate chain[26]. [Pg.295]

Allylalion of the alkoxymalonitrile 231 followed by hydrolysis affords acyl cyanide, which is converted into the amide 232. Hence the reagent 231 can be used as an acyl anion equivalent[144]. Methoxy(phenylthio)acetonitrile is allylated with allylic carbonates or vinyloxiranes. After allylation. they are converted into esters or lactones. The intramolecular version using 233 has been applied to the synthesis of the macrolide 234[37]. The /i,7-unsaturated nitrile 235 is prepared by the reaction of allylic carbonate with trimethylsilyl cyanide[145]. [Pg.321]

Organoboranes are reactive compounds for cross-coupling[277]. The synthesis of humulene (83) by the intramolecular cross-coupling of allylic bromide with alkenylborane is an example[278]. The reaction of vinyiborane with vinyl-oxirane (425) affords the homoallylic alcohol 426 by 1,2-addition as main products and the allylic alcohol 427 by 1,4-addition as a minor product[279]. Two phenyl groups in sodium tetraphenylborate (428) are used for the coupling with allylic acetate[280] or allyl chloride[33,28l]. [Pg.347]

Coupling of allyl chloride with the (2 -alkenylpentafluorosilicate 463 using Pd(OAc)j as a catalyst at room temperature gives a 1,4-diene in good yields. The reaction has been applied to the synthesis of recifeiolide[299]. [Pg.351]

Desulfonylation of equally substituted allylic sulfones with NaBH4 and LiBHEt3 usually yields a mixture of regioisomeric alkenes[406,407]. However, the regioselective attack of the less substituted side of the unsymme-trically substituted allylic system with LiEtjBH has been utilized for the removal of the allylic sulfone group in synthesis of the polyprenoid 658[408],... [Pg.379]

The synthesis of 10 features the SN2 displacement of the allylic acetate with migration of R2 from the ate complex6. Precursors 9 are prepared by the hydroboration of 3-acetoxy-l-alkynes that are available with very high enantiomeric purity via the asymmetric reduction of the corresponding l-alkyn-3-ones, and a substantial degree of asymmetric induction occurs in the conversion of 9 to 10. Best results, based on the enantioselectivity of reactions of 10 with aldehydes, are obtained when R2 is a bulky group such as isopinocampheyl (79 85 % ee)6. The yields of reactions of 10 with aldehydes are 62-76%. [Pg.314]

Allylsilanes are available by treatment of allyl acetates and allyl carbonates with silyl cuprates17-18, with antarafacial stereochemistry being observed for displacement of tertiary allyl acetates19. This reaction provides a useful asymmetric synthesis of allylsilanes using esters and carbamates derived from optically active secondary alcohols antarafacial stereochemistry is observed for the esters, and suprafacial stereochemistry for the carbamates20,21. [Pg.342]

Allylic sulfones and a, /5-unsaturated sulfones are known to be in equilibrium314-319. Allylic sulfones, such as 242, isomerize to a, /5-unsaturated sulfones 243 upon treatment with a catalytic amount of potassium t-butoxide in dry THF. The a, /5-unsaturated sulfones can be converted to the corresponding olefins upon desulfonation with sodium amalgam320 or aluminium amalgam294,321. Since treatment of allylic sulfones with potassium-graphite gives 2-alkenes, alkylation of allylic sulfones and subsequent desulfonation is a useful process for the synthesis of olefins, as shown in Scheme 6. [Pg.630]

A family of interesting polycychc systems 106 related to pyrrolidines was obtained in a one-pot double intermolecular 1,3-dipolar cycloaddition, irradiating derivatives of o-allyl-sahcylaldehydes with microwaves in toluene for 10 min in presence of the TEA salt of glycine esters [71]. A very similar approach was previously proposed by Bashiardes and co-workers to obtain a one-pot multicomponent synthesis of benzopyrano-pyrrolidines 107 and pyrrole products 108 (Scheme 37). The latter cycloadducts were obtained when o-propargylic benzaldehydes were utihzed instead of o-allyhc benzalde-hydes, followed by in situ oxidation [72]. [Pg.234]

In 2004, Yang and Tseng reported the synthesis of a series of new chiral amino thiol ligands derived from L-valine, which were further employed (1 mol%) in the enantioselective alkenylzinc addition to aldehydes, providing an efficient route for chiral ( )-allylic alcohols with enantioselectivities of up to >99% ee, as shown in Scheme 3.67. ... [Pg.147]

With the A-ring unit readily available, we directed our attention to the formation of the B-ring. At first, we duplicated the five step scheme reported in Sih s strigol synthesis involving 1) esterification of the acid 14, 2) allylic bromination with N-bromo 8 ucc i n imi d e (NBS) to 15, 3) condensation with the sodium salt of dimethyl malonate to 16, 4) alkylation with methyl bromoacetate to 17, and 5) acid catalyzed hydrolysis and decarboxylation to the acid 18. [Pg.440]

Asymmetric synthesis of tricyclic nitro ergoline synthon (up to 70% ee) is accomplished by intramolecular cyclization of nitro compound Pd(0)-catalyzed complexes with classical C2 symmetry diphosphanes.94 Palladium complexes of 4,5-dihydrooxazoles are better chiral ligands to promote asymmetric allylic alkylation than classical catalysts. For example, allylic substitution with nitromethane gives enantioselectivity exceeding 99% ee (Eq. 5.62).95 Phosphi-noxazolines can induce very high enatioselectivity in other transition metal-catalyzed reactions.96 Diastereo- and enantioselective allylation of substituted nitroalkanes has also been reported.9513... [Pg.146]

In another variant of such reactions, the hemi-acetal 104, generated in situ by reaction of the corresponding allylic alcohol with acetaldehyde, undergoes cyclization in the presence of HgClOAc to afford the mercurated acetal 105.128 Under these conditions, the reaction leads to the jy -product with a high selectivity (dr > 10 1 Scheme 14). The same strategy has been applied iteratively for the stereoselective synthesis of natural products containing 1,3,5,7,9-pentaether chains.129... [Pg.437]

Microwave-mediated transesterification of commercially available neat poly(styr-ene-co-allyl alcohol) with ethyl 3-oxobutanoate, ethyl 3-phenyl-3-oxopropanoate, and diethyl malonate provided the desired polymer-supported /i-dicarbonyl compounds (Scheme 12.18) [65]. Multigram quantities of these interesting building blocks for heterocycle synthesis were obtained simply by exposing the neat mixture of reagents to microwave irradiation in a domestic microwave oven for 10 min. [Pg.418]

Scheme 12.6. Synthesis of enantiomerically pure allylic alcohols with titanocene chloride. Scheme 12.6. Synthesis of enantiomerically pure allylic alcohols with titanocene chloride.
Efforts have been made to apply r 3-allyltitanium chemistry to the asymmetric synthesis of homoallylic alcohols and carboxylic acids. The synthesis and reactions of chiral r 3 -allyl-titanocenes with planar chirality, or containing Cp ligands with chiral substituents, have been reported [6c,15,30—32]. The enantiofacial selectivity in the allyltitanation reactions has been examined for the complexes 12 [15], 13 [30], 14 [31], 15, 16, and 17 [32] depicted in Figure 13.2. [Pg.458]

Somei adapted this chemistry to syntheses of (+)-norchanoclavine-I, ( )-chanoclavine-I, ( )-isochanoclavine-I, ( )-agroclavine, and related indoles [243-245, 248]. Extension of this Heck reaction to 7-iodoindoline and 2-methyl-3-buten-2-ol led to a synthesis of the alkaloid annonidine A [247]. In contrast to the uneventful Heck chemistry of allylic alcohols with 4-haloindoles, reaction of thallated indole 186 with 2-methyl-4-trimethylsilyl-3-butyn-2-ol affords an unusual l-oxa-2-sila-3-cyclopentene indole product [249]. Hegedus was also an early pioneer in exploring Heck reactions of haloindoles [250-252], Thus, reaction of 4-bromo-l-(4-toluenesulfonyl)indole (11) under Heck conditions affords 4-substituted indoles 222 [250], Murakami described the same reaction with ethyl acrylate [83], and 2-iodo-5-(and 7-) azaindoles undergo a Heck reaction with methyl acrylate [19]. [Pg.124]

Stille coupling (12, 56).1 The key step in a synthesis of (E)-neomanoalide (4) involves palladium-catalyzed coupling of an allyl halide with an a-stannylfuran. Thus 1 and 2 couple in the presence of Pd(dba)2 and P(C6H5), to form 3 as a 1 1 mixture of (E)- and (Z)-isomers in 66% yield. Conversion of 3 to 4 involves reduction (DIBAH) and selective singlet oxygen oxidation of a 2-silylfuran to a butenolide. [Pg.38]

General Procedure for the Silylformaltion/Sakurai Allylation. Synthesis of Polyol Fragments for Polyketide and Macrolide Synthesis. In a magnetically stirred stainless-steel Parr bomb the substrate (1 eq) is dissolved in benzene. The solution is cooled to - 78 °C until frozen. Rh(acac)(CO)2 (3 mol %) is then added and the Parr bomb is assembled and pressurized with CO (60 bar) and vented. This purge is repeated twice and the Parr bomb is pressurized with CO (60 bar) at - 78 °C. The apparatus is then immersed in an oil bath and heated at 60 °C for 22-24 h. After cooling to 0 °C, the bomb is vented. The solution... [Pg.89]

Phosphonium salts, e.g. (124), derived from polynuclear hydrocarbons and used as intermediates in helicine synthesis, have been prepared by the reaction of the appropriate benzylic alcohol with triphenylphosphine hydrobromide.120 Similarly, the salt (125), of value as an intermediate in carotenoid synthesis, has been prepared by the reaction of a precursor allylic alcohol with triphenylphosphine hydrobromide.121 Bromomethyl a-diketones react with triphenylphosphine to form... [Pg.20]


See other pages where Allylic syntheses with is mentioned: [Pg.159]    [Pg.133]    [Pg.348]    [Pg.380]    [Pg.35]    [Pg.26]    [Pg.355]    [Pg.649]    [Pg.175]    [Pg.248]    [Pg.62]    [Pg.40]    [Pg.56]    [Pg.847]    [Pg.1336]    [Pg.128]    [Pg.226]    [Pg.13]    [Pg.588]    [Pg.300]    [Pg.5]    [Pg.171]    [Pg.410]    [Pg.661]    [Pg.698]    [Pg.173]    [Pg.36]    [Pg.158]   
See also in sourсe #XX -- [ Pg.19 ]




SEARCH



Alkanes, 1,1-disulfinylreaction with allylic epoxides synthesis of macrolides

Allyl synthesis

Allylic synthesis

Synthesis reaction with allylic halides

© 2024 chempedia.info