Alkynic chloride

Alkylations of boron-stabilized carbanions have been carried out with primary alkyl halides containing acetal, alkene, alkyne, chloride, cyano, ester and tosylate groups, though a ketone group was not tolerated. ... 

Both chlorines of 1,1-dichloroethylene (340) react stepwise with different terminal alkynes to form the unsymmetrical enediyne 341 [250]. The coupling of the dichloroimine 342 with tin acetylide followed by hydrolysis affords the dialkynyl ketone 343[2511. The phenylthioimidoyl chloride 344 undergoes stepwise reactions with two different tin acetylides to give the dialkynylimine 345[252],... 

The alkenylzirconium 685, prepared by hydrozirconation of a terminal alkyne with hydrozirconocene chloride, reacts with alkenyl halide to afford the conjugated diene 686(545]. The Zr reagent can be used even in the presence of the carbonyl group in 687, which is sensitive to Al and Mg reagents. 

The alkynyl ketones 840 can be prepared by the reaction of acyi chlorides with terminal alkynes, Cul in the presence of Et3N is the cocatalyst[719]. (1-Alkynyl)tributylstannanes are also used for the alkynyl ketone synthesis[720]. The a,. 3-alkynic dithio and thiono esters 842 can be prepared by the reaction of the corresponding acid chloride 841 with terminal alkynes[721,722]. 

Terminal alkynes react with propargylic carbonates at room temperature to afford the alka-l, 2-dien-4-yne 14 (allenylalkyne) in good yield with catalysis by Pd(0) and Cul[5], The reaction can be explained by the transmetallation of the (7-allenylpailadium methoxide 4 with copper acetylides to form the allenyKalk-ynyl)palladium 13, which undergoes reductive elimination to form the allenyl alkyne 14. In addition to propargylic carbonates, propargylic chlorides and acetates (in the presence of ZnCb) also react with terminal alkynes to afford allenylalkynes[6], Allenylalkynes are prepared by the reaction of the alkynyl-oxiranes 15 with zinc acetylides[7]. 

Propargylic alcohol, after lithiation, reacts with CO2 to generate the lithium carbonate 243, which undergoes oxypalladation. The reaction of allyl chloride yields the cyclic carbonate 244 and PdC. By this reaction hydroxy and allyl groups are introduced into the triple bond to give the o-allyl ketone 245[129]. Also the formation of 248 from the keto alkyne 246 with CO2 via in situ formation of the carbonate 247 is catalyzed by Pd(0)[130]. 

The cyclic enol ether 255 from the functionalized 3-alkynoI 254 was converted into the furans 256 by the reaction of allyl chloride, and 257 by elimination of MeOH[132], The alkynes 258 and 260, which have two hydroxy groups at suitable positions, are converted into the cyclic acetals 259 and 261. Carcogran and frontalin have been prepared by this reaction[124]. 

The reaction of allyl halides with terminal alkynes by use of PdClifFhCNji as a catalyst affords the l-halo-l,4-pentadienes 297. 7r-AlIylpalladium is not an intermediate in this reaction. The reaction proceeds by chloropalladation of the triple bond by PdCh, followed by the insertion of the double bond of the allyl halide to generate 296. The last step is the regeneration by elimination of PdCh, which recycles[148]. The cis addition of allyl chloride to alkynes is supported by formation of the cyclopentenone 299 from the addition product 298 by Ni(CO)4-catalyzed carbonylation[149]. 

Hydrogen bromide (but not hydrogen chloride or hydrogen iodide) adds to alkynes by a free radical mechanism when peroxides are present m the reaction mixture As m the free radical addition of hydrogen bromide to alkenes (Section 6 8) a regioselectiv ity opposite to Markovmkov s rule is observed... 

Both ( )- and (Z)-l-halo-l-alkenes can be prepared by hydroboration of 1-alkynes or 1-halo-l-alkynes followed by halogenation of the intermediate boronic esters (244,245). Differences in the addition—elimination mechanisms operating in these reactions lead to the opposite configurations of iodides as compared to bromides and chlorides. 

General Reaction Chemistry of Sulfonic Acids. Sulfonic acids may be used to produce sulfonic acid esters, which are derived from epoxides, olefins, alkynes, aHenes, and ketenes, as shown in Figure 1 (10). Sulfonic acids may be converted to sulfonamides via reaction with an amine in the presence of phosphoms oxychloride [10025-87-3] POCl (H)- Because sulfonic acids are generally not converted directiy to sulfonamides, the reaction most likely involves a sulfonyl chloride intermediate. Phosphoms pentachlotide [10026-13-8] and phosphoms pentabromide [7789-69-7] can be used to convert sulfonic acids to the corresponding sulfonyl haUdes (12,13). The conversion may also be accompHshed by continuous electrolysis of thiols or disulfides in the presence of aqueous HCl [7647-01-0] (14) or by direct sulfonation with chlorosulfuric acid. Sulfonyl fluorides are typically prepared by direct sulfonation with fluorosulfutic acid [7789-21-17, or by reaction of the sulfonic acid or sulfonate with fluorosulfutic acid. Halogenation of sulfonic acids, which avoids production of a sulfonyl haUde, can be achieved under oxidative halogenation conditions (15). 

Using a number of other aldehydes, more compHcated products result. Stmcture (2) was also found to react with alkynes in the presence of copper(I) chloride to give furans ... 

The direct combination of selenium and acetylene provides the most convenient source of selenophene (76JHC1319). Lesser amounts of many other compounds are formed concurrently and include 2- and 3-alkylselenophenes, benzo[6]selenophene and isomeric selenoloselenophenes (76CS(10)159). The commercial availability of thiophene makes comparable reactions of little interest for the obtention of the parent heterocycle in the laboratory. However, the reaction of substituted acetylenes with morpholinyl disulfide is of some synthetic value. The process, which appears to entail the initial formation of thionitroxyl radicals, converts phenylacetylene into a 3 1 mixture of 2,4- and 2,5-diphenylthiophene, methyl propiolate into dimethyl thiophene-2,5-dicarboxylate, and ethyl phenylpropiolate into diethyl 3,4-diphenylthiophene-2,5-dicarboxylate (Scheme 83a) (77TL3413). Dimethyl thiophene-2,4-dicarboxylate is obtained from methyl propiolate by treatment with dimethyl sulfoxide and thionyl chloride (Scheme 83b) (66CB1558). The rhodium carbonyl catalyzed carbonylation of alkynes in alcohols provides 5-alkoxy-2(5//)-furanones (Scheme 83c) (81CL993). The inclusion of ethylene provides 5-ethyl-2(5//)-furanones instead (82NKK242). The nickel acetate catalyzed addition of r-butyl isocyanide to alkynes provides access to 2-aminopyrroles (Scheme 83d) (70S593). 

Fluoride ion attacks the sulfur atom in 2,3-diphenylthiirene 1,1-dioxide to give ck-1,2-diphenylethylenesulfonyl fluoride (23%) and diphenylacetylene (35%). Bromide or iodide ion does not react (80JOC2604). Treatment of S-alkylthiirenium salts with chloride ion gives products of carbon attack, but the possibility of sulfur attack followed by addition of the sulfenyl chloride so produced to the alkyne has not been excluded (79MI50600). In fact the methanesulfenyl chloride formed from l-methyl-2,3-di- -butylthiirenium tetrafluoroborate has been trapped by reaction with 2-butyne. A sulfurane intermediate may be indicated by NMR experiments in liquid sulfur dioxide. 

Terminal (perfluoroalkyl)alkynes react with iodine or iodine chloride to yield syn addition products bearing iodine on the terminal carbon [16 (equation 9). 

Cyclotrithiazyl chloride is also a useful reagent in organic chemistry in the fusion of 1,2,5-thiadiazoles to quinones as well as the synthesis of (a) isothiazoles from 2,5-disubstituted furans and (b) bis-1,2,5-thiadiazoles from A-alkylpyrroles (Scheme 8.4). Alkenes and alkynes react readily with (NSC1)3 to give 1,2,5-thiadiazoles, while 1,4-diphenyl-1,3-butadiene gives a variety of heterocyclic products including a bis(l, 2,5-thiadiazole). ... 

Reaction with Alkyl Halides The gas inlet tube is replaced by an addition funnel, and 10 ml of HMPT is added rapidly with stirring. The mixture is cooled to 10-15°, and a solution of the alkyl halide (0.1 mole) in 20 ml of THF is added dropwise over a period of 30-40 minutes. The mixture is then heated to 40° for 2-3 hours. The thick white suspension of the sodium halide is cooled and dilute cold hydrochloric acid is carefully added until the mixture is clear. The organic layer is separated, and the aqueous layer is extracted three times with 20-ml portions of ether, the ethereal extracts then being combined with the organic material. The ethereal solution is washed twice with saturated sodium chloride solution and dried. The ether and THF are removed under reduced pressure (rotary evaporator), and the alkyne is distilled. 

An alkyne is a hydrocarbon that contains a carbon-carbon triple bond. Acetylene.. H—C= C—H, the simplest alkyne, was once widely used in industry as the starting material for the preparation of acetaldehyde, acetic acid, vinyl chloride, and other high-volume chemicals, but more efficient routes to these substances using ethylene as starting material are now available. Acetylene is still used in the preparation of acrylic polymers but is probably best known as the gas burned in high-temperature oxy-acetylene welding torches. 

DNA sequencing and. 1113 Electrospray ionization (ESI) mass spectrometry, 417-418 Electrostatic potential map, 37 acetaldehyde, 688 acetamide, 791,922 acetate ion. 43. 53, 56, 757 acetic acid. 53. 55 acetic acid dimer, 755 acetic anhydride, 791 acetone, 55, 56. 78 acetone anion, 56 acetyl azide, 830 acetyl chloride, 791 acetylene. 262 acetylide anion, 271 acid anhydride, 791 acid chloride, 791 acyl cation, 558 adenine, 1104 alanine, 1017 alanine zwitterion, 1017 alcohol. 75 alkene, 74, 147 alkyl halide, 75 alkyne. 74... 

Infrared radiation, electromagnetic spectrum and, 419, 422 energy of. 422 frequencies of, 422 wavelengths of, 422 Infrared spectroscopy, 422-431 acid anhydrides, 822-823 acid chlorides, 822-823 alcohols. 428, 632-633 aldehydes, 428. 730-731 alkanes, 426-427 alkenes, 427 alkynes, 427 amides. 822-823 amines, 428, 952 ammonium salts, 952-953 aromatic compound, 427-428, 534 bond stretching in, 422... 

Rearrangement reaction, 138 Reducing sugar, 992 Reduction, 229. 348 acid chlorides, 804 aldehydes, 609-610. 709 aldoses, 992 alkene, 229-232 alkyne, 268-270 amides, 815-816 arenediazonium salt, 943 aromatic compounds and, 579-580... 

---