Cyclopentenones, alkene reactions

In hydrocarbon solvents, the principal products from cyclopentenones result from hydrogen abstraction processes. Irradiation of cyclopentenone in cyclohexane gives a mixture of 2- and 3-cyclohexylcyclopentanone. These products can be formed by intermolecular hydrogen abstraction, followed by recombination of the resulting radicals. It is interesting that as in the alkene cycloaddition reaction, reactivity is observed at both C(2) and C(3) of the excited enone system. 

In the presence of a double bond at a suitable position, the CO insertion is followed by alkene insertion. In the intramolecular reaction of 552, different products, 553 and 554, are obtained by the use of diflerent catalytic spe-cies[408,409]. Pd(dba)2 in the absence of Ph,P affords 554. PdCl2(Ph3P)3 affords the spiro p-keto ester 553. The carbonylation of o-methallylbenzyl chloride (555) produced the benzoannulated enol lactone 556 by CO, alkene. and CO insertions. In addition, the cyclobutanone derivative 558 was obtained as a byproduct via the cycloaddition of the ketene intermediate 557[4I0]. Another type of intramolecular enone formation is used for the formation of the heterocyclic compounds 559[4l I]. The carbonylation of the I-iodo-1,4-diene 560 produces the cyclopentenone 561 by CO. alkene. and CO insertions[409,4l2]. 

The reaction of an alkyne 1 and an alkene 2 in the presence of dicobaltoctacar-bonyl to yield a cyclopentenone 3 is referred to as the Pauson-Khand reaction Formally it is a [2 + 2 + 1 ]-cycloaddition reaction. The dicobaltoctacarbonyl acts as coordinating agent as well as a source of carbon monoxide. 

Initial step is the formation of a dicobalthexacarbonyl-alkyne complex 5 by reaction of alkyne 1 with dicobaltoctacarbonyl 4 with concomitant loss of two molecules of CO. Complex 5 has been shown to be an intermediate by independent synthesis. It is likely that complex 5 coordinates to the alkene 2. Insertion of carbon monoxide then leads to formation of a cyclopentenone complex 6, which decomposes into dicobalthexacarbonyl and cyclopentenone 3 ... 

The reaction of alkenes with alkenes or alkynes does not always produce an aromatic ring. An important variation of this reaction reacts dienes, diynes, or en-ynes with transition metals to form organometallic coordination complexes. In the presence of carbon monoxide, cyclopentenone derivatives are formed in what is known as the Pauson-Khand reaction The reaction involves (1) formation of a hexacarbonyldicobalt-alkyne complex and (2) decomposition of the complex in the presence of an alkene. A typical example Rhodium and tungsten ... 

Olefin hydrocarbonylation can be used in conjunction with oxidative addition to prepare indanones and cyclopentenones, but the reaction is limited to terminal alkenes.243... 

Co-catalyzed transformations are concerned mainly with the [2+2+2] cycloadditions of three alkyne groups to give arenes. Another important reaction is the [2+2+1] cycloaddition of alkynes, alkenes and CO to give cyclopentenones, which is the well-known as Pauson-Khand reaction [272]. 

The [2+2+1] cycloaddition of an alkene, an alkyne, and carbon monoxide is known as the Pauson-Khand reaction and is often the method of choice for the preparation of complex cyclopentenones [155]. Groth and coworkers have demonstrated that Pauson-Khand reactions can be carried out very efficiently under microwave heating conditions (Scheme 6.75 a) [156]. Taking advantage of sealed-vessel technology, 20 mol% of dicobalt octacarbonyl was found to be sufficient to drive all of the studied Pauson-Khand reactions to completion, without the need for additional carbon monoxide. The carefully optimized reaction conditions utilized 1.2 equivalents of... 

Pauson-Khand cyclopentenone synthesisThe cycloaddition of an alkene with an alkyne complexed with Co2(CO) usually furnishes a mixture of two cy-clopentenones when the alkene is unsymmetrical. The regioselectivity can be improved markedly if the alkene bears a heteroatom that can coordinate with the cobalt complex. Both sulfur and nitrogen ligands can improve the yield and regio-control of this reaction. 

Tius and co-workers elegantly applied a variant of the Nazarov reaction to the preparation of cyclopentenone prostaglandins (Scheme 19.39) [46]. Moreover, it was demonstrated that the chirality of non-racemic allenes is transferred to an sp3-hybridized carbon atom. Preparation of allenic morpholinoamide 214 and resolution of the enantiomers by chiral HPLC provided (-)- and (+)-214. Compound (-)-214 was exposed to the vinyllithium species 215 to afford a presumed intermediate which was not observed but spontaneously cyclized to give (+)- and (—)-216 as a 5 1 mixture. Compound (+)-216 was obtained with an 84% transfer of chiral information and (-)-216 was obtained in 64% ee. The lower enantiomeric excess of (—)-216 indicates that some Z to E isomerization took place. This was validated by the conversion of 216 to 217, where the absolute configuration was established. The stereochemical outcome of this reaction has been explained by conrotatory cyclization of 218 in which the distal group on the allene rotates away from the alkene to give 216. 

Abstract The transition metal mediated conversion of alkynes, alkenes, and carbon monoxide in a formal [2 + 2+1] cycloaddition process, commonly known as the Pauson-Khand reaction (PKR), is an elegant method for the construction of cyclopentenone scaffolds. During the last decade, significant improvements have been achieved in this area. For instance, catalytic PKR variants are nowadays possible with different metal sources. In addition, new asymmetric approaches were established and the reaction has been applied as a key step in various total syntheses. Recent work has also focused on the development of CO-free conditions, incorporating transfer carbonylation reactions. This review attempts to cover the most important developments in this area. 

An important procedure for the synthesis of cyclopentenones is the so-called Pauson-Khand reaction, which constitutes a formal [2 + 2 + 1] cycloaddition of an alkene, an alkyne, and carbon monoxide. Due to the increase in structural diversity of the available starting materials, the reaction has become an attractive target for scientific investigations [1-8]. The first successful example was reported by Pauson, Khand et al [9] in 1973 for the conversion of norbornene with the phenylacetylene-hexacarbonyldicobalt complex to give the corresponding cyclopentenone in 45% yield (Eq. 1). 

The Pauson-Khand reaction involves the aimulation of an alkene, an alkyne and carhon monoxide to yield cyclopentenones. Recently, it was shown that in this respect polymer-hound species (60) is an effective catalyst which may be generated by heating Co2(CO)g with polystyrene-bound phosphine (Scheme 4.37) [129]. 

Transition-metal-promoted cycloaddition is of much interest as a powerful tool for synthesis of carbocyclic stmcture in a single step. Utilization of carbon monoxide as a component of the cycloaddition reaction is now widely known as the Pauson-Khand reaction, which results in cyclopentenone formation starting from an alkyne, an alkene, and carbon monoxide mediated by cobalt catalyst. Although mechanistic understanding is limited, a commonly accepted mechanism is shown in Scheme 4.16. Formation of dicobalt-alkyne complex followed by alkene... 

As dibromocyclopropanes can easily be synthesized by reacting a cycloalkene with bromoform in the presence of a base [16], this method affords an alternative procedure for cyclopentenone annelation onto cyclic alkenes. It should be noted that in the Pauson-Khand reaction, which is probably the most direct cyclopentenone annelation reaction, the reaction using cyclohexene gives the product only in very low yield [11,17]. Also, the position of the original alkynyl substituent on the product double bond is opposite to that in the present reaction. Thus the two reactions are complementary. 

Several reports have appeared on the effect of additives on the Pauson-Khand reaction employing an alkyne-Co2(CO)6 complex. For example, addition of phosphine oxide improves the yields of cyclopentenones 119], while addition of dimethyl sulfoxide accelerates the reaction considerably [20]. Furthermore, it has been reported that the Pauson-Khand reaction proceeds even at room temperature when a tertiary amine M-oxide, such as trimethylamine M-oxide or N-methylmorpholine M-oxide, is added to the alkyne-Co2(CO)6 complex in the presence of alkenes [21]. These results suggest that in the Pauson-Khand reaction generation of coordinatively unsaturated cobalt species by the attack of oxides on the carbonyl ligand of the alkyne-Co2(CO)6 complex [22] is the key step. With this knowledge in mind, we examined further the effect of various other additives on the reaction to obtain information on the mechanism of this rearrangement. 

However, from the outset of this field, the limitations as well as the potentials of this cycloaddition were also apparent. For instance, the efficiency of this cycloaddition in an intermolecular manner was typically low unless strained olefins were used. Moreover, the use of unsymmetrical alkenes led to a mixture of the cyclopentenone regioisomers. Synthetic utility of this reaction is considerably expanded by the emergency of the intramolecular reaction. Schore introduced the first intramolecular version forming several rings simultaneously, which is now the most popular synthetic strategy in natural product synthesis because of its conceptual and operational simplicity. Additionally, the regiochemistry is no longer the problem in this variation. 

Carbonylation of epoxides.4 The epoxide of a 1-alkene undergoes carbony-lation under catalysis with Co2(CO)8 in the presence of K2C03 (1 equiv.) in ethanol at moderate temperatures to afford (3-hydroxy esters. A by-product is the ketone formed by rearrangement of the epoxide. This reaction provides an essential step in the synthesis of the cyclopentenone 3 from the epoxide (1) of ethyl 10-unde-cenoate. 

The [2+2+1] cycloaddition of an alkene, an alkyne and carbon monoxide is commonly known as the Pauson-Khand reaction. This transformation has been adopted many times in the synthesis of complex natural products and related compounds, which contain a cyclopentenone moiety, for example, prostaglandins. Two independent reports of this reaction appeared almost simultaneously in late 2002 by Iqbal and co-workers25 and Fisher and co-workers26, respectively. They not only used very similar substrate systems in their studies, but they also reached very similar conclusions Toluene was found to be the preferred solvent in this reaction, even though it is a very poor microwave absorber. A reaction time between 5 and 10 min, using dicob alto ctacar-bonyl or dicobalthexacarbonyl as the carbon monoxide source, and a temperature of 100-120°C resulted in high yields of the products. Fisher and co-workers used 20 mol% Co2(CO)8 and cyclohexylamine as an additive (Scheme 5.12), since this system had been used previously in order to allow a catalytic reaction. Iqbal and co-workers did not use cyclohexylamine, but instead used 1 equiv. of the carbon monoxide (Co2(CO)6) source. In both reports, the products were formed in 40-70% yield. 

The iron-mediated [2 + 2 + 1]-cycloaddition to cyclopentadienones has been successfully applied to the synthesis of corannulene [24] and the yohimbane alkaloid ( )-demethoxycarbonyldihydrogambirtannine [25]. A [2 + 2 + l]-cydoaddition of an alkene, an alkyne and carbon monoxide mediated by pentacarbonyliron, related to the well-known Pauson-Khand reaction [26], has also been described to afford cyclopentenones [27]. 

The domino carbonylation and Diels-Alder reaction proceed only as an intramolecular version. Attempted carbonylation and intermolecular Diels-Alder reaction of conjugated 2-yne-4-enyl carbonates 101 in the presence of various alkenes as dienophiles give entirely different carbocyclization products without undergoing the intermolecular Diels-Alder reaction. The 5-alkylidene-2-cyclopenten-4-onecarboxy-lates 102 were obtained unexpectedly by the incorporation of two molecules of CO in 82% yield from 101 at 50 °C under 1 atm [25], The use of bidentate ligands such as DPPP or DPPE is important. The following mechanism of the carbocyclization of 103 has been proposed. The formation of palladacyclopentene 105 from 104 (oxidative cyclization) is proposed as an intermediate of 108. Then CO insertion to the palladacycle 105 generates acylpalladium 106. Subsequent reductive elimination affords the cyclopentenone 107, which isomerizes to the cyclopentenone 108 as the final product. 

Synthesis of Cyclopentenones by the Reaction of Alkyne, Alkene and Carbon Monoxide (Pauson-Khand Reaction)... 

For the intermolecular version, strained alkenes such as norbomene give satisfactory results. Cyclopentenones are obtained in good yields by the reaction of alkyne Co complex with alkene in the presence of silica. Wet alumina also gives good... 

The intramolecular version presents a very useful synthetic route to various polycyclic compounds. Even terminal alkenes give cyclopentenones in good yields, assisted by the addition of /V-methylmorpholine N-oxide (NMO) [85], The addition of trimethylamine A -oxidc also dramatically accelerates the reaction in the presence of oxygen, and both inter- and intramolecular reactions proceed at 0°C to room temperature [86]. The reaction was found to proceed rapidly at 25 °C by the addition of aqueous NH4OH [87]. Numerous applications to natural product syntheses have been reported. The tri- and tetracyclic skeletons 214 for crinipellin B, from 213 [88], and the triquinacene derivative 216, from 215, have been constructed [89,90], These results show that internal alkynes and terminal alkenes react smoothly in the intramolecular reactions. Domino reaction of the endiyne 217 produced the strained molecule of oxa[5.5.5.5]fenestrenedione (219) via 218 [91]. 

---