Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkenes copper chloride

Branched acids and esters are obtained from the palladium-catalyzed reaction in the absence of phosphines, and in the presence of copper chloride and HC1.79 The mild reaction conditions and the regio-specificity make this a very attractive carboxylation procedure (entry 5, Table 5). Internal straight chain alkenes can be hydrocarboxylated, but the rates are slower and the reaction is not regiospecific. [Pg.939]

When either an alcohol or an amine function is present in the alkene, the possibility for lactone or lactam formation exists. Cobalt or rhodium catalysts convert 2,2-dimethyl-3-buten-l-ol to 2,3,3-trimethyl- y-butyrolactone, with minor amounts of the 8-lactone being formed (equation 51).2 In this case, isomerization of the double bond is not possible. The reaction of allyl alcohols catalyzed by cobalt or rhodium is carried out under reaction conditions that are severe, so isomerization to propanal occurs rapidly. Running the reaction in acetonitrile provides a 60% yield of lactone, while a rhodium carbonyl catalyst in the presence of an amine gives butane-1,4-diol in 60-70% (equation 52).8 A mild method of converting allyl and homoallyl alcohols to lactones utilizes the palladium chloride/copper chloride catalyst system (Table 6).79,82 83... [Pg.941]

Dicarboxylation reactions of alkenes can be carried out such that predominately 1,2-addition of the two ester functions occurs (equation 61). The reaction takes place under mild conditions (1-3 bar, 25 C) in alcohol. It is stoichiometric in palladium, since the palladium(II) catalyst is reduced to palladium(O) in the process, but by use of an oxidant (stoichiometric copper chloride or catalytic copper chloride plus oxygen equation 62 and 63) the reaction becomes catalytic in palladium. In the reoxidation process, water is generated and the build-up of water increases the water gas shift reaction at the expense of the carboxylation. Thus a water scavenger such as triethyl orthoformate is necessary for a smooth reaction. [Pg.946]

The reaction of norbomene yields the cis exo diester (equation 66).93 This exo isomer is not obtained directly by Diels-Alder chemistry. Other cyclic alkenes such as cyclopentene yield cis diesters, but isomers are obtained as a result of (3-hydride elimination-readdition from intermediates such as (23) prior to CO insertion (equation 67). Thus the palladium walks around the ring to some extent, but always stays on the same face. The extent of rearrangement can be minimized by higher CO pressures since CO insertion becomes more competitive with (3-elimination. This rearrangement becomes a critical problem in the dicarboxylation of 1-alkenes, since a variety of diesters are formed and the reaction is not particularly useful. These reactions were carried out with catalytic amounts of palladium and stoichiometric amounts of copper chloride. [Pg.947]

To overcome the problems encountered in the homogeneous Wacker oxidation of higher alkenes several attempts have been undertaken to develop a gas-phase version of the process. The first heterogeneous catalysts were prepared by the deposition of palladium chloride and copper chloride on support materials, such as zeolite Y [2,3] or active carbon [4]. However, these catalysts all suffered from rapid deactivation. Other authors applied other redox components such as vanadium pentoxide [5,6] or p-benzoquinone [7]. The best results have been achieved with catalysts based on palladium salts deposited on a monolayer of vanadium oxide spread out over a high surface area support material, such as y-alumina [8]. Van der Heide showed that with catalysts consisting of H2PdCU deposited on a monolayer vanadium oxide supported on y-alumina, ethene as well as 1-butene and styrene... [Pg.433]

In combination with the incremental advances concerning reaction conditions in recent years, especially for low-pressure carbonylations, there is a trend toward increasing use of this chemistry to synthesize advanced building blocks. In this respect carboxylation of alkenes with an appropriate alcohol or amine function leads to the formation of lactones or lactams. Thus, cobalt, rhodium, or palladium chloride/copper chloride catalysts convert allyl and homoallyl alcohols or amines to the corresponding butyrolactones or butyrolactams, respectively [15]. [Pg.185]

Photochemical decomposition of diazo(trimethylsilyl)methane (1) in the presence of alkenes has not been thoroughly investigated (see Houben-Weyl Vol. E19b, p 1415). The available experimental data [trimethylsilylcyclopropane (17% yield) and la,2a,3/J-2,3-dimethyl-l-trimethylsilylcyclopropane (23% yield)] indicate that cyclopropanation occurs only in low yield with ethene and ( )-but-2-ene.24 In both cases the formal carbene dimer is the main product. In reactions with other alkenes, such as 2,3-dimethylbut-2-ene, tetrafluoroethene or hexafluoro-propene, no cyclopropanes could be detected.24 The transition-metal-catalyzed decomposition of diazo(trimethylsilyl)methane (1) has been applied to the synthesis of many different silicon-substituted cyclopropanes (see Table 3 and Houben-Weyl Vol.E19b, p 1415).3-20a b-11 Copper chloride has been most commonly used for carbene transfer to ethyl-substituted alkenes, cycloalkenes, styrene, and related arylalkenes.3,203,15,21 25 For the cyclopropanation of acyl-substituted alkenes, palladium(II) chloride is the catalyst of choice, while palladium(II) acetate was less efficient, and copper chloride, copper(II) sulfate and rhodium(II) acetate dimer were totally unproductive.21 The cyclopropanation of ( )-but-2-ene represents a unique... [Pg.821]

This nickel catalyst can be further optimized by the addition of copper chloride before the hydride reduction step leading to improvements in alkene selectivity [17] ... [Pg.354]

ILs are a special class of molten salts that are liquid at temperatures below 100 °G, such as tetrabutylphosphonium chloride (m.p. 80 °G) or a 1/1 mixture of triethylammonium chloride/copper chloride (m.p. 25 °G). This type of molten salt has been known since the end of the nineteenth century, but it was only at the beginning of the 1990s that this class of fluids entered the organometallic chemistry scene with the use of water- and air-sensitive organoalumi-nate molten salts as solvents for the biphasic oligomerization of alkenes catalyzed by nickel compounds.Since then, and in particular with the advent of more air- and water-compatible room-temperature the renaissance... [Pg.848]

The intramolecular diamination of alkenes could be further extended to the synthesis of cyclic guanidines (Eq. (4.29)) [31]. In this case, copper chloride represents the optimum oxidant and the reaction proceeds equally well for both five and six-membered annelation products. [Pg.132]

The addition of carbon nucleophiles to nonactivated alkenes has been discovered by Hegedus in the 1980s using stoichiometric amounts of palladium salts. In the last decade, an oxidative eatalytic version has been elaborated mainly by the groups of Pei et and Stoltz. An example is shown in Scheme 5-188. The reoxidation of the palladium(0) generated is promoted by either stoichiometric amount of copper chloride or under aerobic conditions with catal3dic quantities of copper salts. [Pg.944]

Reaction 31 appears to be little affected by substituent electronic effects or by steric effects of either sulfonyl chloride or styrenes. Treatment of /5-chlorosulfones with triethylamine in benzene affords the corresponding a, /5-unsaturated sulfones in excellent yield. The copper-catalyzed addition of sulfonyl iodides to simple and cyclic alkenes has also been exploited76. [Pg.1105]

A conveniently prepared amorphous silica-supported titanium catalyst exhibits activity similar to that of Ti-substituted zeolites in the epoxidation of terminal linear and bulky alkenes such as cyclohexene (22) <00CC855>. An unusual example of copper-catalyzed epoxidation has also been reported, in which olefins are treated with substoichiometric amounts of soluble Cu(II) compounds in methylene chloride, using MCPBA as a terminal oxidant. Yields are variable, but can be quite high. For example, cis-stilbene 24 was epoxidized in 90% yield. In this case, a mixture of cis- and /rans-epoxides was obtained, suggesting a step-wise radical mechanism <00TL1013>. [Pg.55]

Fig. 17. Mechanistic studies of alkene metathesis provided methods to increase the rates of reaction. Copper (I) chloride and hydrochloric acid have been used to encourage dissociation of the phosphine ligands... Fig. 17. Mechanistic studies of alkene metathesis provided methods to increase the rates of reaction. Copper (I) chloride and hydrochloric acid have been used to encourage dissociation of the phosphine ligands...
Nitroalkanes react with Jt-deficient alkenes, for example, p-nitro ketones are produced from a,P-unsaturated ketones [41], whereas allylic nitro compounds have been prepared via the Michael-type addition of nitroalkanes with electron-deficient alkynes (Table 6.19). The reaction in either dimethylsulphoxide [42] or dimethyl-formamide [43] is catalysed by potassium fluoride in the presence of benzyltriethyl-ammonium chloride the reaction with dimethyl acetylenedicarboxylate is only successful in dimethylsulphoxide [42], Primary nitroalkanes produce double Michael adducts [42,44], A-Protected a-aminoacetonitriles react with alkynes under catalysed solidiliquid conditions to produce the Michael adducts [45] which, upon treatment with aqueous copper(Il) sulphate, are converted into a,p-unsaturated ketones. [Pg.281]

The metal-catalysed autoxidation of alkenes to produce ketones (Wacker reaction) is promoted by the presence of quaternary ammonium salts [14]. For example, using copper(II) chloride and palladium(II) chloride in benzene in the presence of cetyltrimethylammonium bromide, 1-decene is converted into 2-decanone (73%), 1,7-octadiene into 2,7-octadione (77%) and vinylcyclohexane into cyclo-hexylethanone (22%). Benzyltriethylammonium chloride and tetra-n-butylammo-nium hydrogen sulphate are ineffective catalysts. It has been suggested that the process is not micellar, although the catalysts have the characteristics of those which produce micelles. The Wacker reaction is also catalysed by rhodium and ruthenium salts in the presence of a quaternary ammonium salt. Generally, however, the yields are lower than those obtained using the palladium catalyst and, frequently, several oxidation products are obtained from each reaction [15]. [Pg.461]

Solutions of low-valence titanium chloride (titanium dichloride) are prepared in situ by reduction of solutions of titanium trichloride in tetrahydrofuran or 1,2-dimethoxyethane with lithium aluminum hydride [204, 205], with lithium or potassium [206], with magnesium [207, 208] or with a zinc-copper couple [209,210]. Such solutions effect hydrogenolysis of halogens [208], deoxygenation of epoxides [204] and reduction of aldehydes and ketones to alkenes [205,... [Pg.30]


See other pages where Alkenes copper chloride is mentioned: [Pg.167]    [Pg.167]    [Pg.167]    [Pg.167]    [Pg.97]    [Pg.182]    [Pg.69]    [Pg.120]    [Pg.120]    [Pg.425]    [Pg.13]    [Pg.174]    [Pg.156]    [Pg.224]    [Pg.956]    [Pg.956]    [Pg.349]    [Pg.192]    [Pg.232]    [Pg.107]    [Pg.174]    [Pg.114]    [Pg.123]    [Pg.224]    [Pg.83]    [Pg.114]    [Pg.123]    [Pg.184]    [Pg.570]   
See also in sourсe #XX -- [ Pg.215 ]




SEARCH



Chlorides alkenes

Copper chloride

© 2024 chempedia.info